This exclusive package is brought to you by Onlinecarstereo. We have put together this bundle to kickstart your vehicle to the path of excellent car audio.
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
.jpg)
Enjoy peace of mind with Smart EPS Protection, effortless ignition with Instant Power-Up, and crystal-clear audio powered by studio-grade Burr-Brown converters and cutting-edge 64-bit DSP technology—fully customizable via PC or smartphone for the ultimate listening experience.
Experience powerful, distortion-free sound with Soft-Clipping technology optimized for 2 Ohm loads, a 100 dB signal-to-noise ratio for crystal-clear audio, and deep, precise response across a wide 10 Hz to 22.5 kHz frequency range.
.jpg)
.jpg)
Unlock premium sound performance with ultra-low distortion at just 0.01% THD, while optional Bluetooth® USB dongles bring wireless streaming convenience, and an optional OLED remote gives you full DSP control through a sleek, intuitive display.
MUSWAY is known for its small and at the same time very powerful products. The two new flat subwoofers also join this tradition. Due to their design, they also suitable for installation locations that have little space in depth when shallow installation dimensions are a must. With an installation depth of 78 mm for the 8" (20 cm) and a sensationally low 87 mm for the 10" (25 cm) subwoofer, they are the ideal problem solvers for special installations.
A particularly flat subwoofer should of course sound good and must be robust. That is why MUSWAY uses special and very hard cones made of the composite materials glass fiber and carbon . No savings were made on the drives either: the woofers have 40 or 45 ounce magnets and are driven by 50 mm dual voice coils, which are also very long wound. With Xmax values ??of +/- 15 mm, both woofers ensure a decent stroke. With 250 or 300 watts RMS, they are also very resilient, so that no compromises have to be made.
The BTS-HD USB dongle allows you to stream aptX HD from your mobile device to your Musway DSP amplifier or DSP processor.
The BTS-HD USB dongle allows you to stream aptX HD from your mobile device to your Musway DSP amplifier or DSP processor. Simply connect the dongle to the DSP amplifier or processor via USB and select the Bluetooth input via the DSP software or with the optional DRC1 digital remote control.
aptX HD is designed to deliver 24-bit/192 kHz HD audio wirelessly over Bluetooth. It is engineered to improve the signal-to-noise ratio and lower the Total Harmonic Distortion (THD), resulting in lower background noise with no audio artifacts so you can enjoy your music with hardly any interference. The BTS-HD supports the following music formats: aptX, aptX II, aptX HD. The system version of Android mobile device must be 8.0 or higher.
For use with: M4+, M6, D8, M12, DSP68, TUNE12
The MG6.2A is an active component system, which means it includes built-in amplification and active crossovers. This eliminates the need for external amplifiers and passive crossovers, simplifying the installation process.
The system is a 2-way configuration, consisting of a woofer and a tweeter. The 6.5" woofer is responsible for reproducing midrange and lower frequencies, while the tweeter handles high-frequency sounds.
The tweeter is responsible for reproducing high-frequency sounds with clarity and detail. It's usually a dome-type tweeter made from materials like silk, textile, or metal, known for their smooth sound reproduction and wide dispersion.
The MG6.2A is designed for car audio installations. It typically includes mounting hardware and accessories for easy installation in your vehicle's speaker locations.
This receiver's suite of sound-crafting tools includes a 13-band equalizer, deep crossover settings, and built-in digital time alignment to ensure your seat is the sweet spot. This receiver's processing power ensures you'll enjoy depth and detail from all your digital music sources. The KW-M180BT also includes five 2-volt RCA preamp outputs so you'll have plenty of flexibility when it's time to add amplifiers to your system.
These days, vehicle cameras are a must for safer driving, and JVC gives you a dedicated input for adding a backup cam. It'll even show parking guidelines for compatible cameras. And if you have high-def video files loaded onto a flash drive, this JVC will play them in bright and clear detail when you're parked. When you're on the road, you can entertain your passengers by sending a movie from the receiver to a rear-seat screen.
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard.
This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio.
The dash kit is contoured and textured to compliment the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
he ControlPRO SWI-CP2 lets you retain your vehicle's built-in steering wheel controls when upgrading to an aftermarket radio – no need to sacrifice convenience! Perfectly compatible with today’s top vehicles, even those with complex electronics like CAN bus, GMLAN, and Class II systems.
With the ControlPRO SWI-CP2, you can effortlessly retain your steering wheel controls (SWC) when upgrading to an aftermarket radio. No more losing control over your volume, tracks, or other settings—enjoy the convenience of keeping all your steering wheel functions intact, even with your brand-new system!
Easily configure wiring and vehicle settings using the ControlPRO Web-App (Windows) or Mobile App (iOS & Android) – enjoy a seamless setup right from your device.
Take control with Manual Programming Mode! Easily program your steering wheel control (SWC) values using the simple programming button – perfect for vehicles with analog SWC and a 12V accessory wire.
The elegant DRC1 digital remote control puts the control of your audio system at your fingertips. From the stunning aluminum housing and control knob to the OLED display, the exquisite DRC1 will not disappoint in any vehicle interior, even in the highest end brands. The DRC1 makes it possible to control master volume, subwoofer level, signal source, access stored DSP presets and a short press on the rotary knob mutes the entire sound system. The DRC1 can be surface or flush mounted.
For use with: M4+, M6, D8, M12, DSP68 and TUNE12
Features:
Musway DSP Software for Windows:
Specifications:
Product Overview:
Specifications:
Specifications:
Product Highlights:
Specifications :
Woofer
Tweeter
Features:
Specifications:
Features:
Wiring and Antenna Connections:
AXDIS-MB82 (amplified) (sold separately)
40-EU10 (sold separately)
Features:
Retains Steering Wheel Controls (SWC) when replacing factory radio with an aftermarket radio
Specifications:
Product Type:Steering Wheel Control Interface
Specifications:
This exclusive package is brought to you by Onlinecarstereo. We have put together this bundle to kickstart your vehicle to the path of excellent car audio.
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Enjoy peace of mind with Smart EPS Protection, effortless ignition with Instant Power-Up, and crystal-clear audio powered by studio-grade Burr-Brown converters and cutting-edge 64-bit DSP technology—fully customizable via PC or smartphone for the ultimate listening experience.
Experience powerful, distortion-free sound with Soft-Clipping technology optimized for 2 Ohm loads, a 100 dB signal-to-noise ratio for crystal-clear audio, and deep, precise response across a wide 10 Hz to 22.5 kHz frequency range.
Unlock premium sound performance with ultra-low distortion at just 0.01% THD, while optional Bluetooth® USB dongles bring wireless streaming convenience, and an optional OLED remote gives you full DSP control through a sleek, intuitive display.
MUSWAY is known for its small and at the same time very powerful products. The two new flat subwoofers also join this tradition. Due to their design, they also suitable for installation locations that have little space in depth when shallow installation dimensions are a must. With an installation depth of 78 mm for the 8" (20 cm) and a sensationally low 87 mm for the 10" (25 cm) subwoofer, they are the ideal problem solvers for special installations.
A particularly flat subwoofer should of course sound good and must be robust. That is why MUSWAY uses special and very hard cones made of the composite materials glass fiber and carbon . No savings were made on the drives either: the woofers have 40 or 45 ounce magnets and are driven by 50 mm dual voice coils, which are also very long wound. With Xmax values ??of +/- 15 mm, both woofers ensure a decent stroke. With 250 or 300 watts RMS, they are also very resilient, so that no compromises have to be made.
The BTS-HD USB dongle allows you to stream aptX HD from your mobile device to your Musway DSP amplifier or DSP processor.
The BTS-HD USB dongle allows you to stream aptX HD from your mobile device to your Musway DSP amplifier or DSP processor. Simply connect the dongle to the DSP amplifier or processor via USB and select the Bluetooth input via the DSP software or with the optional DRC1 digital remote control.
aptX HD is designed to deliver 24-bit/192 kHz HD audio wirelessly over Bluetooth. It is engineered to improve the signal-to-noise ratio and lower the Total Harmonic Distortion (THD), resulting in lower background noise with no audio artifacts so you can enjoy your music with hardly any interference. The BTS-HD supports the following music formats: aptX, aptX II, aptX HD. The system version of Android mobile device must be 8.0 or higher.
For use with: M4+, M6, D8, M12, DSP68, TUNE12
The MG6.2A is an active component system, which means it includes built-in amplification and active crossovers. This eliminates the need for external amplifiers and passive crossovers, simplifying the installation process.
The system is a 2-way configuration, consisting of a woofer and a tweeter. The 6.5" woofer is responsible for reproducing midrange and lower frequencies, while the tweeter handles high-frequency sounds.
The tweeter is responsible for reproducing high-frequency sounds with clarity and detail. It's usually a dome-type tweeter made from materials like silk, textile, or metal, known for their smooth sound reproduction and wide dispersion.
The MG6.2A is designed for car audio installations. It typically includes mounting hardware and accessories for easy installation in your vehicle's speaker locations.
This receiver's suite of sound-crafting tools includes a 13-band equalizer, deep crossover settings, and built-in digital time alignment to ensure your seat is the sweet spot. This receiver's processing power ensures you'll enjoy depth and detail from all your digital music sources. The KW-M180BT also includes five 2-volt RCA preamp outputs so you'll have plenty of flexibility when it's time to add amplifiers to your system.
These days, vehicle cameras are a must for safer driving, and JVC gives you a dedicated input for adding a backup cam. It'll even show parking guidelines for compatible cameras. And if you have high-def video files loaded onto a flash drive, this JVC will play them in bright and clear detail when you're parked. When you're on the road, you can entertain your passengers by sending a movie from the receiver to a rear-seat screen.
This stereo installation kit has been engineered to help you install either a 2” tall (Single-DIN) or a 4” tall (Double-DIN) aftermarket radio into the original vehicle dashboard.
This dash kit makes radio replacement simple and comes with a pocket that is installed below the 2” radio to fill the extra space in the radio opening, which can be used for storage. The pocket is not needed when installing a 4” tall radio.
The dash kit is contoured and textured to compliment the original look and feel of the vehicle’s dashboard. Installing an aftermarket radio can upgrade the sound quality and provide additional features the original factory radio couldn’t offer but requires this dash kit to make it fit.
he ControlPRO SWI-CP2 lets you retain your vehicle's built-in steering wheel controls when upgrading to an aftermarket radio – no need to sacrifice convenience! Perfectly compatible with today’s top vehicles, even those with complex electronics like CAN bus, GMLAN, and Class II systems.
With the ControlPRO SWI-CP2, you can effortlessly retain your steering wheel controls (SWC) when upgrading to an aftermarket radio. No more losing control over your volume, tracks, or other settings—enjoy the convenience of keeping all your steering wheel functions intact, even with your brand-new system!
Easily configure wiring and vehicle settings using the ControlPRO Web-App (Windows) or Mobile App (iOS & Android) – enjoy a seamless setup right from your device.
Take control with Manual Programming Mode! Easily program your steering wheel control (SWC) values using the simple programming button – perfect for vehicles with analog SWC and a 12V accessory wire.
The elegant DRC1 digital remote control puts the control of your audio system at your fingertips. From the stunning aluminum housing and control knob to the OLED display, the exquisite DRC1 will not disappoint in any vehicle interior, even in the highest end brands. The DRC1 makes it possible to control master volume, subwoofer level, signal source, access stored DSP presets and a short press on the rotary knob mutes the entire sound system. The DRC1 can be surface or flush mounted.
For use with: M4+, M6, D8, M12, DSP68 and TUNE12
