Rockford Fosgate RFK-HDRKM5 Complete Amplifier Install Kit with Bluetooth Streaming Module Included for Select 1998-Up Harley Davidson Road King Motorcycles
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Amplifier mounting plate with attached 3M adhesive mounting strips
- • Amp cover
- • (2) Road King brackets
- • 4.5' Amplifier & Bluetooth wiring harness with connected RFBTRCA Bluetooth streaming module (attached 3M adhesive mounting pad)
- • Power cable assembly with 5' 10-gauge power & ground wires (in-line fuse holder on power wire with 40A ATO fuse installed) and remote wire
- • 6" Front speaker harness with bare-ended wire
- • (2) Road King amp turn-on harnesses ('98-'13 & 2014+)
- • 45mm hole saw
- • 1/8" Drill bit
- • (2) 10mm screws
- • (2) 4mm screws
- • (2) Flat washers
- • Cable clamp
- • (12) 8" wire ties
- • Alcohol prep pad
- • Adhesion promoter pad
- • Rockford Fosgate support information
- • Owner's Manual
Why Choose Rockford Fosgate RFK-HDRKM5 Amp Installation Kit?
Clean Harley Audio Upgrade Without the Mess
It is designed specifically for Road King and select Electra Glide models, giving you a purpose-built fit that works with your saddlebags instead of fighting against them. The low-profile mounting brackets let you install your M5-800X4 amplifier securely while still keeping most of your storage space usable, so you do not have to sacrifice practicality for better sound.
Built for Easy Install and Real Compatibility
The vehicle-specific design supports a wide range of Harley-Davidson models from 1998 up to 2023, including CVO and Road King Special builds, so you get proper fitment across factory saddlebag setups. The direct wiring harness system connects cleanly to your Rockford Fosgate amplifier, cutting down install time and reducing the frustration that usually comes with custom audio builds on motorcycles.
Bluetooth Control and High Quality Power Delivery
The integrated Bluetooth audio module lets you stream music directly from your phone with a handlebar-mounted control for easy access while riding. On the power side, the 100 percent pure crystal oxygen-free copper wiring ensures clean signal flow and strong power delivery, all built to CEA-2015 standards for reliability. The result is a clean, professional install that sounds great, looks factory, and holds up to real road conditions.
Frequently Asked Questions (FAQ)
- • Why does the amplifier have no power after installation?
Check the fuse, battery connection, ground, and power cable. Loose terminals or an incorrect connection can prevent the system from powering on properly.
- • Why does the main fuse keep blowing?
Check for pinched power wires, incorrect fuse sizing, or a short circuit. Inspect the cable routing carefully before replacing the fuse again.
- • Why is the power cable difficult to route?
Large-gauge wiring may require careful routing through tight areas. Plan the cable path first and protect it from sharp edges and moving parts.
- • Why does the connection feel loose?
Loose terminals can cause voltage drops and intermittent power. Make sure the terminals are properly crimped and securely fastened to their connection points.
- • Why does the amplifier cut out while driving?
Vibration can loosen power or ground connections. Check the terminals, fuse holder, and cable connections, then secure the wiring properly.
- • Is the included fuse enough for my amplifier?
The fuse must match the amplifier's required rating and installation specifications. Always verify the recommended fuse size before installation.
- • Why does the power wire get warm?
Excessive heat can indicate an undersized cable, loose connection, or excessive current draw. Check the wiring size and all connection points.
- • Can I install the kit myself?
It can be installed by experienced DIY users. Follow the wiring instructions carefully and use proper crimping and routing techniques.
- • What should I do if the fuse blows immediately?
Do not repeatedly replace the fuse. Check for a short, damaged insulation, reversed connections, or incorrect wiring before applying power again.
- • What should I check if the amplifier still won't turn on?
Verify the fuse, battery connection, ground, power cable, and amplifier terminals. Use a multimeter to confirm proper voltage at the connections.
Features:
- Precision Harley-Davidson Amplifier Integration Kit: Purpose-built installation system designed for Rockford Fosgate M5-800X4 amplifiers, enabling clean and secure mounting on select Harley-Davidson Road King motorcycles while preserving saddlebag storage space.
- Vehicle-Specific Fitment Engineering: Compatible with multiple Harley-Davidson Road King, Electra Glide, and CVO models from 1998 up to 2023, ensuring accurate fitment across factory ABS saddlebag and lid configurations.
- Low-Profile Amplifier Mounting Bracket Design: Custom brackets allow secure amplifier installation inside saddlebags while maintaining maximum usable storage capacity and minimizing internal space intrusion.
- Integrated Bluetooth Audio Streaming Module: Pre-installed Bluetooth system with handlebar-mounted activation control enables wireless music streaming from compatible smartphones and devices for convenient on-the-go audio control.
- Direct Plug and Play Wiring Harness System: Pre-configured wiring designed for seamless integration with Rockford Fosgate M5-800X4 amplifiers, reducing installation complexity and setup time.
- 100 Percent Pure Crystal Oxygen Free Copper Wiring: High-quality PC-OFC conductors ensure maximum conductivity and signal integrity while meeting or exceeding standard AWG requirements for reliable power delivery.
- CEA-2015 Compliant Cable Construction: Engineered to industry standards for precise copper sizing and consistent electrical performance across all included wiring components.
- Clean and Professional Installation Layout: Optimized wiring and mounting design supports a factory-style finish while maintaining durability in demanding powersports environments.
Specifications:
- Dual Amp Installation Kit: No
- Battery PWR/GND Gauge: 8 AWG
- Amplifier PWR/GND Gauge: 8 AWG
- Speaker Wire Gauge: 16 AWG
- Fuse Size: 60 Amp
- Fuse Type: MAXI
- UPC: 780687360382
- Weight: 15
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
