SSV Works 190-WP3-DFO4 4-Speaker Overhead Sound Bar for Select 2016-2024 CanAm Defender Models -Not compatible with Defender Limited
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • WP Overhead Enclosure
- • (4) 6.5" SSV Works Powersports Speakers
- • MRB3 Bluetooth Media Receiver
- • Mounting Hardware
- • Owner's Manual
Quick & Easy Plug-&-Play Installation
Skip the hassle—no soldering, cutting, or crimping needed. Just bolt in the pre-installed speaker enclosures, connect the vehicle-specific wiring, turn the key, and hit the trail. Spend less time installing and more time enjoying the ride.
Seamless Style & Rugged Performance
Enjoy a true factory look with purpose-built enclosures that blend perfectly with your vehicle’s design. Built Trail Ready™, these audio components are tough enough to take on sand, dust, water, and snow—all while delivering premium sound quality wherever you ride.
Expandable Audio System
All WP systems are upgrade-ready, allowing you to add vehicle-specific amplified subwoofers or universal cage-pod speakers for even bigger sound and the ultimate riding experience.
Frequently Asked Questions (FAQ)
- • What if the rear mounting brackets are missing from my package?
Some installers have reported confusion when the rear mounting brackets were not immediately found in the box. Before starting installation, compare every bracket against the supplied instructions, and contact SSV Works support if the required hardware is genuinely missing.
- • Can the sound bar be used with a Can-Am Defender windshield wiper?
This is an important compatibility concern. SSV Works states that the sound bar is not compatible with the Defender windshield wiper setup, so owners with a factory wiper should verify alternative audio options before purchasing.
- • Will the overhead enclosure work with the factory Sport Roof?
Yes. The system is designed around the Defender's factory cage and is listed as compatible with factory Sport Roof configurations.
- • Why does the installation wiring seem harder than expected?
Although the system is marketed as plug-and-play, you still need to route the power and ground wiring to the vehicle. One owner specifically suggested using existing cage drain openings and accessory connections rather than drilling new holes, which can make the installation cleaner.
- • Can I wire the system so it shuts off automatically with the ignition?
Yes, the installation can be integrated with an appropriate accessory/ACC power source. A user reported connecting through the Defender's ACC2 terminals so the sound system turns on and off with the key instead of remaining connected directly to constant battery power.
- • Why does the overhead unit interfere with something mounted on my cage?
The enclosure occupies the upper factory-cage area, so aftermarket cage accessories, wiring, lights, or other equipment may compete for the same mounting space. Check the cage area carefully before installation instead of assuming every accessory will clear the enclosure.
- • Does the MRB3 controller come preinstalled or do I have to mount it separately?
The MRB3 Bluetooth media receiver comes preinstalled in the overhead system, reducing the amount of dash fabrication and separate component mounting required.
- • Why is the sound system still quiet even though all four speakers are working?
The system uses a built-in 50W × 4 digital amplifier, so output can be affected by the source volume, EQ settings, Bluetooth device volume, and the audio environment of an open UTV. Adjusting the source and MRB3 settings before assuming the speakers are underpowered can help.
- • Can I expand the 190-WP3-DFO4 later if I want more speakers?
Yes. SSV Works describes the WP system as expandable, allowing compatible additional speakers or an amplified subwoofer to be added as your audio setup grows.
- • What should I do if the sound bar doesn't sit flush against the cage?
First verify that the correct factory-cage mounting points and supplied brackets are being used and that no wiring or accessory is trapped between the enclosure and cage. The system is purpose-built for factory-fit installation, so a significant gap usually indicates a mounting, hardware, or fitment issue rather than something that should be forced into position.
Features:
- Plug-&-Play: No soldering, cutting, or crimping required. Simply bolt down the pre-installed speaker enclosures, run the vehicle-specific wiring, turn the key, and go. Designed for quick installation so you spend less time wrenching and more time riding.
- Factory Fit and Finish: Purpose-built enclosures match factory styling for a seamless, OEM-quality appearance.
- Trail Ready™: Engineered for the off-road environment, audio components are built to withstand sand, dust, water, and snow while delivering premium sound.
- Expandable: All WP systems can be upgraded with vehicle-specific amplified subwoofers or universal cage-pod speakers for the ultimate riding experience.
- UPC: 815172016397
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
