Orion XSM652SL XTR Series 6.5" 1200W Peak Power Handling at 2-Ohms, Slim Ultra Efficient Midrange Car Speakers (Pair)
We are a Orion authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6.5" Slim Ultra Midrange Speaker
- • Owner's Manual
Why Choose Orion XSM652SL Midrange Speaker?
Power Meets Precision Sound
Experience powerful, crystal-clear sound with the ORION XTR Series Midrange Speaker, engineered for precision and performance.Enjoy distortion-free audio at any volume with its advanced bullet phase plug design that enhances clarity and cooling.Built with a slim, heavy-duty steel frame, this speaker delivers lasting durability and exceptional sound quality in any setup.
Built for Power and Precision
Experience powerful, high-performance audio that stays cool under pressure with advanced high-temperature protection for lasting reliability. Enjoy both style and safety with sleek, durable grills that shield your speakers while elevating your setup’s look. With an impressive 300W RMS and 1200W peak power, these speakers deliver bold, dynamic sound that commands attention.
Engineered for Pure Sound Clarity
Experience clear, detailed sound with a wide frequency range that brings every note to life. Enjoy lasting performance with a durable non-pressed paper cone and treated cloth surround built for precision. Perfect for any setup, this speaker delivers rich, accurate midrange tones that elevate your listening experience.
Orion XSM652SL Highlights
HIGH POWER
300W RMS Output
Handles 300 watts RMS and up to 1,200 watts peak power for powerful, dynamic midrange performance.
2-OHM PERFORMANCE
Ultra-Efficient Design
The 2-ohm configuration provides efficient power handling and flexible amplifier matching for high-output audio systems.
SLIM DESIGN
2.6-Inch Mounting Depth
The slim basket and 66mm mounting depth make installation easier in tight spaces where standard midrange speakers may not fit.
BULLET PHASE PLUG
Clearer Midrange Detail
The billet aluminum bullet phase plug improves sound clarity and dispersion while helping cool the voice coil during high-power operation.
WIDE FREQUENCY RANGE
120Hz–20kHz Response
Covers a broad range of midrange frequencies for clear vocals, detailed instruments, and balanced sound reproduction.
DURABLE BUILD
Heavy-Gauge Steel Frame
The heavy-gauge stamped steel frame provides strength and rigidity while helping minimize vibration and resonance.
DURABLE MATERIALS
Paper Cone & Treated Surround
A non-pressed paper cone and treated cloth accordion surround support accurate, responsive sound reproduction and dependable performance.
Frequently Asked Questions (FAQ)
- • Why Does My Orion XSM652SL Sound Too Quiet With the Factory Stereo?
The factory head unit may not provide enough power to drive these high-power 2-ohm midrange speakers effectively. An appropriately matched amplifier may help achieve stronger output.
- • Why Is There Almost No Bass Coming From My XSM652SL Speakers?
The XSM652SL is designed primarily for midrange frequencies, with a listed response beginning around 120 Hz. A dedicated subwoofer may be necessary for deep, low-frequency bass.
- • Can the XSM652SL Fit Into a Tight Door or Custom Speaker Panel?
Although its shallow design helps with restricted mounting spaces, the listed mounting depth is approximately 2.6 inches. Measure the available clearance and cutout before installation.
- • Why Does My Speaker Sound Harsh When I Increase the Volume?
Excessive amplifier gain, clipping, incorrect crossover settings, or an unsuitable system configuration can cause harsh or distorted audio. Check the amplifier settings before increasing the volume further.
- • Why Does One XSM652SL Speaker Sound Different From the Other?
Differences in wiring polarity, amplifier channels, installation position, or speaker connections can affect the sound between two speakers. Testing each speaker independently can help identify the source.
- • Is a 2-Ohm Amplifier Required for the Orion XSM652SL?
The XSM652SL has a listed 2-ohm impedance, so the amplifier must support the impedance of the connected speaker load. Verify the amplifier's specifications before connecting the speakers.
- • Why Does My Speaker Vibrate or Produce Unwanted Rattling Sounds?
Loose mounting screws, door panels, speaker grilles, or surrounding trim can create rattles during playback. Inspect the installation and ensure the speaker is securely mounted.
- • Can the XSM652SL Handle High-Powered Amplifiers Without Overheating?
The speaker is listed with a 300W RMS power rating, but actual performance depends on amplifier matching, gain adjustment, ventilation, and listening levels. Avoid sending clipped or excessive power to the speaker.
- • Why Does My New XSM652SL Setup Sound Thin Compared With My Old Speakers?
A change in speaker design, enclosure conditions, crossover settings, or amplifier output can alter the sound balance. These speakers emphasize midrange performance, so system tuning may be necessary to achieve the desired sound.
- • What Should I Do If My XSM652SL Stops Working After Installation?
First, turn off the system and inspect the speaker wiring, terminals, amplifier output, and mounting connections. If the issue persists, contact the seller or manufacturer to discuss testing, warranty coverage, or replacement options.
- Diameter : 6.5 Inch
- Sensitivity : 97.2 dB
- Impedance : 2 Ohm
- Frequency Response : 120-20000 Hz
- Peak Power Handling : 1200 Watts
- Top Mount Depth : 2.6 Inches
- RMS Power Handling : 300 Watts
Features:
- 2-Ohm Midrange Speaker: Designed for accurate sound and seamless integration into a variety of audio systems.
- Bullet Phase Plug: Improves sound clarity and cooling, ensuring distortion-free audio even at high volumes.
- Slim Heavy-Gauged Stamped Steel Frame: Delivers exceptional strength and rigidity in a compact design, minimizing vibrations and resonance for improved sound clarity and lasting durability in demanding applications.
- High-Temperature Coating: Enhances heat resistance, protecting the speaker components during extended use at high power levels, ensuring consistent performance and longevity in demanding environments.
- Grills Included for Added Protection: Comes with durable, stylish grills that not only protect the speaker from damage but also enhance the overall aesthetic, while ensuring optimal sound performance in any setup.
- High Power Handling: 300 Watts RMS and 1200 Watts peak power for dynamic, powerful sound performance.
- Durable Construction: Built with a non-pressed paper cone and a treated cloth accordion surround for enhanced durability and accurate sound reproduction.
- Wide Frequency Range: From 120 Hz to 20 kHz, capturing detailed midrange frequencies for a rich audio experience.
Specifications:
- Speaker Size: 6.5 (Inches)
- Voice Coil Configuration: 2 ohm
- Power Handling (Peak): 1200 Watts
- Power Handling (RMS): 300 Watts
- Sensitivity: 97.2 dB
- Frequency Response: 120 Hz - 20 kHz
- Voice Coil Diameter: 1.5" (Inches)
- Speaker Quantity 2 Speakers
- Material: Heavy Gauges Stamped Steel
- Cone Material: Non Pressed Paper
- Phase Plug Material: Billet Aluminum
- Magnet Information: 33 Oz. Ferrite
- Grilles Included: Yes
- Mounting Depth: 66mm / 2.6 (Inches)
- Overall Depth: 70mm / 2.76 (Inches)
- Cutout Diameter: 160mm / 6.3 (Inches)
- Overall Diameter: 170mm / 6.69 (Inches)
- UPC: 818550012868
- Weight: 12.07
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.