PRV Audio 10MR2000-NDY X-Series 10" 2000W RMS (4000W Peak Power Handling) at 8-Ohms, Die Cast Aluminum Midrange Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" X-Series Midrange Car Speaker
- • Installation Accessories
- • Owner's Manual
Extreme Output Without the Extra Weight
The PRV Audio 10MR2000-NDY is built for serious builders who want massive sound without adding unnecessary bulk. Thanks to its high energy neodymium motor, you get powerful magnetic force in a lighter package that is easier to install in custom doors or large scale setups. With an impressive 99 dB sensitivity, this speaker delivers loud, aggressive output while keeping amplifier demand under control. Backed by a huge 1000W RMS and 2000W program power rating, it is made to stay strong and consistent even in the most demanding high SPL environments.
Heavy Duty Performance With Clean and Controlled Sound
This midrange is not just about power, it is about control and clarity at every level. The massive 4 inch inside and outside CCAW voice coil on a glass fiber former handles heat with ease while maintaining sharp transient response. Its 90 Hz to 6,500 Hz range gives you hard hitting midbass along with clear and detailed vocals, making it flexible for different system designs. With a 5.00 mm Xmax, it delivers strong output without losing control at high volume levels. The advanced cooling system and rigid die cast aluminum frame work together to reduce heat and unwanted resonance, so your sound stays clean during long sessions. Whether you are building a stunt wall or a fully tuned pro audio system, this driver gives you the power and flexibility to make it happen.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 10MR2000-NDY sound strained when I push the volume higher?
This is often caused by amplifier clipping, excessive gain, or crossover settings that allow frequencies outside the speaker's intended range. Proper tuning helps maintain clean, powerful output.
- • Can I replace my older ferrite midrange with the PRV Audio 10MR2000-NDY?
Yes. Many users upgrade to the neodymium version for its lighter weight and high efficiency. After installation, retuning the amplifier and crossover is recommended.
- • Why do my vocals get drowned out when the subwoofer is playing?
This usually happens when the subwoofer level is too high or the crossover frequencies overlap. Adjusting both crossover points can restore vocal clarity.
- • Is the PRV Audio 10MR2000-NDY suitable for competition sound systems?
Yes. It is commonly used in SPL and demo builds where extremely loud and detailed midrange performance is required.
- • Why does my speaker make a clicking sound during loud music?
Clicking noises may indicate amplifier clipping, excessive cone movement, or loose wiring. Lowering the volume and checking your crossover settings can help prevent damage.
- • Can I mount the PRV Audio 10MR2000-NDY in custom fiberglass door panels?
Yes. Many custom installers use fiberglass doors and speaker pods, provided they are rigid enough to support the speaker and minimize unwanted vibrations.
- • Why does my amplifier overheat while powering the 10MR2000-NDY?
Overheating can result from low impedance wiring, poor ventilation, excessive gain, or continuous high-output operation. Inspecting the amplifier setup is recommended.
- • Does the lightweight neodymium motor affect durability?
No. The neodymium motor primarily reduces weight while maintaining strong magnetic performance. Correct installation and proper tuning are more important for long-term reliability.
- • Why do my left and right PRV Audio 10MR2000-NDY speakers sound different?
Uneven sound is often caused by polarity errors, mismatched amplifier settings, unequal equalization, or different mounting conditions between the two speakers.
- • How can I get maximum output from the PRV Audio 10MR2000-NDY without distortion?
Use a high-quality amplifier with adequate RMS power, apply the recommended crossover settings, avoid clipping, and fine tune your DSP or equalizer for clean, high-output midrange performance.
- Diameter : 10 Inch
- Sensitivity : 99 dB
- Impedance : 8 Ohm
- Frequency Response : 90-6500 Hz
- Peak Power Handling : 4000 Watts
- RMS Power Handling : 2000 Watts
Features:
- Extreme Power Handling Capability: Rated at 1000W RMS and 2000W program power for uncompromising output in high demand audio environments.
- High Efficiency Performance: 99 dB sensitivity delivers strong acoustic output with efficient power usage for large scale systems.
- Massive Voice Coil Design: 4 inch inside and outside CCAW voice coil on glass fiber former ensures exceptional thermal handling and long term reliability.
- Wide Frequency Coverage: 90 Hz to 6,500 Hz response provides strong midbass punch with clear and detailed vocal reproduction.
- High Excursion Performance: 5.00 mm Xmax supports powerful midbass output while maintaining control at high volume levels.
- Neodymium Motor Advantage: Lightweight high energy motor structure reduces overall weight while maintaining strong magnetic force and efficiency.
- Advanced Cooling System: Extensive venting through the motor and frame reduces heat buildup and minimizes power compression during extended use.
- Die Cast Aluminum Frame: Rigid basket construction enhances durability and reduces unwanted resonance for cleaner sound output.
- Versatile System Application: Designed for use in custom doors, stunt walls, and pro audio systems as both a midrange and midbass driver depending on tuning.
Specifications:
- Nominal Diameter: 10″ (254 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 1000 Watts
- Continuous Program Power (RMS): 2000 Watts
- Max Peak Power: 4000 Watts
- Sensitivity 2.00V at 1m: 99 dB
- Frequency Response: 90 – 6,500 Hz
- Voice Coil Diameter: 4″ (101 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 14.5 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 9.0 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 10.43″ (265 mm)
- Front Mount Baffle Cutout: 9.33″ (237 mm)
- Mounting Depth: 5.08″ (129 mm)
- Overall Depth (with grill): 5.49″ (139.5 mm)
- UPC: 0602938022682
- Weight: 12.78
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
