PRV Audio 12W2000 PRO Series 12" 2000W RMS (4000W Peak Power Handling) at 8-Ohms, Midbass Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" PRO Series Midbass Car Speaker
- • Installation Accessories
- • Owner's Manual
Competition Ready Midbass That Hits With Authority
The PRV Audio 12W2000 is built for serious car audio enthusiasts who want extreme midbass performance that can handle real competition pressure. With 2000 watts continuous program power, it delivers massive low frequency output that stays controlled even at high volume. Its high excursion capability with 10.25 mm Xmax and 36 mm peak to peak movement gives you deep, powerful bass impact while keeping cone motion precise and clean.
Built Tough to Stay Cool Under Extreme Load
This speaker is engineered for nonstop performance in demanding SPL environments. The massive 4 inch split copper voice coil on a fiberglass former is designed with high temperature adhesives and extended 27.5 mm winding depth for serious thermal durability. Combined with a ventilated gap and side forced airflow system, it stays cool under pressure, reducing power compression so your sound stays strong even during long high output sessions.
Precision Control for Clean and Powerful Output
A strong BL motor structure keeps cone movement tight and accurate, giving you controlled low frequency response even when pushed hard. The reinforced glass fiber paper cone with ribbed design and heavy duty suspension system adds strength and stability for extreme use. Optimized specifically for ported SPL enclosure setups, this driver is built to maximize output and efficiency, making it a solid choice for competition level builds that demand power, clarity, and reliability every time you turn it up.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12W2000 not reach its full bass output?
This is often caused by an enclosure that is not built to the recommended specifications, improper amplifier tuning, or inadequate power delivery. Optimizing these areas can significantly improve performance.
- • Can I use the PRV Audio 12W2000 in a vented enclosure?
Yes. Many users choose a vented enclosure to maximize output and efficiency, provided the box is designed according to the recommended tuning specifications.
- • Why does my 12W2000 smell hot after playing for a long time?
A warm electrical smell can occur when the voice coil is under heavy load. This may indicate amplifier clipping, excessive power, or long periods of high-volume playback. Reducing distortion helps extend speaker life.
- • Is the PRV Audio 12W2000 suitable for SPL competitions?
Yes. It is commonly selected for high-output systems because it is designed to handle demanding power levels while delivering strong bass performance.
- • Why does my woofer make a slapping noise during bass heavy songs?
This usually happens when the cone exceeds its safe excursion limits due to low crossover settings, an improperly tuned enclosure, or overpowering the speaker.
- • Can I wire multiple PRV Audio 12W2000 woofers to one amplifier?
Yes, as long as the final impedance is compatible with the amplifier and it can provide sufficient clean RMS power for the connected speakers.
- • Why does my amplifier shut off during long listening sessions?
The amplifier may be overheating, experiencing voltage drops, or operating below its supported impedance. Checking the electrical system and amplifier ventilation can help resolve the issue.
- • Does the PRV Audio 12W2000 need a custom enclosure for the best results?
Yes. Many users achieve the strongest and most controlled bass by building an enclosure that follows the recommended internal volume and port tuning.
- • Why does my bass sound delayed compared to the rest of my speakers?
Improper crossover settings, phase alignment, or enclosure placement can create timing issues. Adjusting the DSP or crossover settings usually improves system integration.
- • How can I get louder and cleaner bass from the PRV Audio 12W2000?
Use a high-quality amplifier with adequate RMS power, build a properly tuned enclosure, set the correct crossover frequencies, and maintain stable electrical voltage for maximum performance.
- Diameter : 12 Inch
- Sensitivity : 94 dB
- Impedance : 8 Ohm
- Frequency Response : 50-2200 Hz
- Peak Power Handling : 4000 Watts
- RMS Power Handling : 2000 Watts
Features:
- Advanced Ventilated Cooling System: Utilizes side forced airflow and ventilated gap design to reduce heat buildup and minimize power compression during extended play.
- High BL Motor Force Engineering: Built with a strong magnet assembly to ensure precise cone control and high efficiency low frequency response.
- Competition Grade High Power Midbass Output: Engineered for extreme performance with 2000 watts continuous program power, delivering deep and impactful low frequency output for sound competition environments.
- Massive 4 Inch Voice Coil Construction: Features a split copper wire voice coil on a fiberglass former with high temperature adhesives for superior thermal durability under extreme load.
- High Excursion Bass Capability: Provides 10.25 mm Xmax with 36 mm peak to peak excursion for powerful bass output with controlled cone movement at high volume.
- Reinforced Cone and Suspension Design: Uses a glass fiber reinforced paper cone with ribbed structure and heavy duty spider system for structural strength.
- Competition Optimized Enclosure Tuning: Designed specifically for ported box applications to maximize output and efficiency in SPL setups.
- Extended Voice Coil Winding Depth: Features a 27.5 mm winding depth for improved power handling and extended linear excursion.
- Professional SPL Grade Reliability: Built for high stress audio competition use with stable performance under short bursts of extreme power.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 1000 Watts
- Continuous Program Power (RMS): 2000 Watts
- Max Peak Power: 4000 Watts
- Sensitivity 2.83V at 1m: 94 dB
- Frequency Response: 50 – 2,200 Hz
- Voice Coil Diameter: 4″ (100 mm)
- Voice Coil Wire: Copper
- Voice Coil Winding Depth: 28.0 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 15.0 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 12.40” (315 mm)
- Front Mount Baffle Cutout: 11.16” (283.4 mm)
- Mounting Depth: 6.02” ( 153 mm)
- Overall Depth: 6.45” (163.7 mm)
- UPC: 810075526196
- Weight: 31.52
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
