PRV Audio 12MR1200X X-Series 12" 1200W RMS (2400W Peak Power Handling) at 8-Ohms, Midrange Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" X-Series Midrange Car Speaker
- • Installation Accessories
- • Owner's Manual
Crystal Clear Vocals That Cut Through Anything
The PRV Audio 12MR1200X is built for car audio enthusiasts who want vocals that stand out loud and clear no matter how hard the system hits. With an impressive 101.5 dB sensitivity, it delivers extreme output even with less power, making it perfect for high SPL setups. From vocals to instruments, everything sounds sharp, detailed, and natural, giving your system that live performance feel every time you turn it up.
Powerful Performance That Stays Consistent
This midrange driver is ready for serious use with 1200 watts program power handling that keeps your sound strong and stable under pressure. The 3 inch copper voice coil on a glass fiber former is built to handle heat and maintain performance during long sessions. With advanced cooling through basket venting and a ventilated magnetic gap, it reduces power loss and keeps your audio clean even at high volume levels.
Versatile Design Built for Real World Installs
Covering a wide 70 Hz to 6500 Hz range, this speaker fits easily into both 2 way and 3 way systems for smooth integration. Its lightweight cone improves response and detail, while the coated woven surround keeps cone movement controlled and accurate. Whether you are building a compact enclosure, custom door setup, or a Chuchero style system, the 12MR1200X gives you the flexibility and performance needed to create a loud, clean, and professional sounding setup.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12MR1200X sound too aggressive at higher volumes?
This is often caused by excessive amplifier gain, aggressive EQ settings, or a crossover point that is too low. Proper tuning helps produce cleaner and more natural vocals.
- • Can I use the PRV Audio 12MR1200X without a compression driver?
Yes, but the speaker is designed for midrange performance. Pairing it with a compression driver or super tweeter creates a more complete frequency response.
- • Why do my vocals disappear when my subwoofers are turned up?
The subwoofer level may be overpowering the midrange, or the crossover frequencies may overlap. Adjusting both crossover points helps restore vocal clarity.
- • Is the PRV Audio 12MR1200X a good speaker for demo vehicles?
Yes. It is widely used in demo and high-output audio systems because of its ability to deliver loud, detailed midrange sound over long distances.
- • Why does my 12MR1200X make a buzzing noise on certain songs?
Buzzing is usually caused by loose speaker mounting, vibrating door panels, damaged wiring, or nearby trim pieces rather than the speaker itself.
- • Can I install the PRV Audio 12MR1200X in custom door panels?
Yes. Many enthusiasts install it in reinforced custom door panels or speaker walls where there is enough mounting space and structural support.
- • Why does my amplifier clip before the PRV Audio 12MR1200X reaches full output?
Incorrect gain settings, insufficient amplifier power, or voltage drops in the electrical system can all cause premature clipping.
- • Does the PRV Audio 12MR1200X benefit from using a DSP?
Yes. A DSP allows precise control over crossover frequencies, equalization, and time alignment, helping the speaker perform at its full potential.
- • Why do my left and right PRV Audio 12MR1200X speakers sound different?
Uneven sound is often caused by reversed polarity, different amplifier gain settings, unequal EQ adjustments, or variations in speaker placement.
- • How can I get louder and cleaner vocals from the PRV Audio 12MR1200X?
Use a properly matched amplifier, apply the recommended crossover settings, avoid amplifier clipping, and fine tune your DSP or equalizer for maximum clarity and output.
- Diameter : 12 Inch
- Sensitivity : 101.5 dB
- Impedance : 8 Ohm
- Frequency Response : 70-6500 Hz
- Peak Power Handling : 2400 Watts
- RMS Power Handling : 1200 Watts
Features:
- Extreme Vocal Output Precision: Engineered with 101.5 dB sensitivity, this midrange delivers exceptional loudness with minimal power input, making it ideal for high SPL car audio systems.
- High Power Handling Capability: Rated at 1200 watts RMS program power, ensuring strong and consistent acoustic performance even under demanding conditions.
- Advanced Voice Coil Design: Features a 3 inch copper voice coil wound on a glass fiber former for superior heat resistance, efficiency, and long term reliability.
- Optimized Cooling System: Incorporates extensive basket venting and a ventilated magnetic gap to reduce power compression and maintain stable performance during extended play.
- Clean and Detailed Sound Reproduction: Designed to reproduce vocals and instruments with clarity and precision, delivering a smooth and natural midrange response.
- Wide Frequency Coverage: Capable of operating from 70 Hz up to 6,500 Hz, making it highly versatile for integration into 2 way and 3 way systems.
- Lightweight Cone Efficiency: Utilizes a lightweight cone structure to improve transient response and extend upper midrange output with excellent definition.
- Durable Suspension Control: Equipped with a coated woven surround to maintain precise cone movement and stability during high output operation.
- Installation Flexibility: Performs exceptionally well in compact enclosures, custom door panels, and Chuchero style builds for optimized midrange projection.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 600 Watts
- Continuous Program Power (RMS): 1200 Watts
- Max Peak Power: 2400 Watts
- Sensitivity 2.83V at 1m: 101.5 dB
- Frequency Response: 70 – 6,500 Hz
- Voice Coil Diameter: 3″ (76 mm)
- Voice Coil Wire: Copper
- Voice Coil Winding Depth: 14.0 mm
- Former Material: Glass fiber
- Magnetic Gap Depth: 10.0 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 12.44″ (316 mm
- Front Mount Baffle Cutout: 11.20″ (284.5 mm)
- Mounting Depth: 4.80″ (122 mm)
- Overall Depth: 5.43″ (138 mm)
- UPC: 810075525915
- Weight: 20.65
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
