PRV Audio 12MR2000 12" 2000W RMS (4000W Peak Power Handling) at 8-Ohms, Midrange Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" Midrange Car Speaker
- • Installation Accessories
- • Owner's Manual
Massive Midrange Power That Commands Attention
The PRV Audio 12MR2000 is built for car audio enthusiasts who want serious output and strong vocal presence that cuts through any system. With up to 2000 watts RMS program power, this midrange driver delivers commanding sound that stays clean and controlled even at high volume. Its 97 dB sensitivity ensures efficient performance, giving you loud, dynamic output without pushing your amplifier too hard.
Precision Sound With Strong and Natural Response
This speaker is designed to deliver more than just volume. The stiff yet lightweight cone produces smooth and accurate midrange tones with extended response up to 5000 Hz, making vocals and instruments sound clear and well defined. Whether you are building a 2 way or 3 way setup, it blends easily with your system while adding strong midbass support and a full, balanced sound.
Built Tough for Real World Performance and Easy Install
Durability meets smart design with a robust 4 inch CCAW voice coil that handles heat and maintains consistency during long sessions. The powerful motor structure keeps cone movement tight, reducing distortion at high output levels. A reinforced die cast aluminum frame adds strength and stability, while the low mounting depth makes it perfect for tight installs like custom doors and stage style builds. This is a speaker made to perform hard, last long, and fit right into your next setup.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12MR2000 sound distorted when I play it at full volume?
Distortion is usually caused by amplifier clipping, excessive gain, or crossover settings that allow unwanted low frequencies to reach the speaker. Proper tuning helps maintain clean output.
- • Can I use the PRV Audio 12MR2000 with my existing horn tweeters?
Yes. Many users pair the 12MR2000 with horn tweeters or compression drivers to create a balanced, high-output audio system with excellent vocal projection.
- • Why do my vocals sound weak compared to my subwoofers?
This often happens when the subwoofer level is too high or the crossover frequencies are not properly adjusted. Balancing the crossover points can improve vocal presence.
- • Is the PRV Audio 12MR2000 a good option for SPL and demo builds?
Yes. It is commonly installed in competition and demo vehicles because of its high-output midrange performance and ability to project vocals over long distances.
- • Why does my speaker produce a rattling noise at certain frequencies?
The rattling is often caused by loose mounting hardware, vibrating door panels, or speaker pods rather than the speaker itself. Inspecting the installation usually solves the issue.
- • Can I install multiple PRV Audio 12MR2000 speakers on one amplifier?
Yes, provided the total impedance is compatible with the amplifier and it can supply enough clean RMS power for all connected speakers.
- • Why does my amplifier overheat while powering the 12MR2000?
Overheating may be caused by incorrect wiring, restricted airflow, low impedance, or prolonged high-volume operation. Proper installation and ventilation can prevent this problem.
- • Does the PRV Audio 12MR2000 require a custom enclosure?
Many users install it in custom speaker pods, door panels, or speaker walls. A rigid and well-designed mounting location helps maximize performance.
- • Why does one PRV Audio 12MR2000 sound louder than the other?
Uneven output is commonly caused by polarity issues, different amplifier gain settings, damaged wiring, or unequal equalizer adjustments.
- • How can I get the best vocal performance from the PRV Audio 12MR2000?
Use a quality amplifier, apply the recommended crossover settings, avoid clipping, and fine tune the equalizer or DSP to achieve loud, clean, and highly detailed midrange sound.
- Diameter : 12 Inch
- Sensitivity : 97 dB
- Impedance : 8 Ohm
- Frequency Response : 72-5000 Hz
- Peak Power Handling : 4000 Watts
- RMS Power Handling : 2000 Watts
Features:
- Maximum Power Midrange Authority: Built to handle up to 2000 watts RMS program power, delivering commanding output for high performance car audio systems.
- High Efficiency Performance: Engineered with 97 dB sensitivity to produce strong sound pressure levels while maintaining efficient power usage.
- Oversized Voice Coil Design: Features a robust 4 inch CCAW voice coil that enhances thermal handling and ensures consistent performance under heavy load.
- Smooth and Accurate Response: Designed with a stiff yet lightweight cone to provide clean midrange reproduction and extended response up to 5,000 Hz.
- Versatile System Integration: Ideal for 2 way and 3 way setups, offering strong vocal presence and midbass support across various system designs.
- Solid Motor Structure: Utilizes a powerful magnet assembly to maintain precise cone control and reduce distortion at high output levels.
- Reinforced Frame Construction: Built with a durable die cast aluminum basket to ensure long term reliability and structural stability.
- Compact Installation Advantage: Engineered with a low mounting depth, making it suitable for tight installs such as custom door panels and stage style builds.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 1000 Watts
- Continuous Program Power (RMS): 2000 Watts
- Max Peak Power: 4000 Watts
- Sensitivity 2.83V at 1m: 97 dB
- Frequency Response: 72 – 5,000 Hz
- Voice Coil Diameter: 4″ (101 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 17.0 mm
- Former Material: Aluminum
- Magnetic Gap Depth: 7.5 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 12.32” (313 mm)
- Front Mount Baffle Cutout: 11.12” (282.5 mm)
- Mounting Depth: 5.47” (139 mm)
- Overall Depth: 5.91” (150 mm)
- UPC: 799928734318
- Weight: 23.04
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
