PRV Audio 12MR2000X V2 X-Series 12" 2000W RMS (4000W Peak Power Handling) at 8-Ohms, Midrange Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" X-Series Midrange Car Speaker
- • Installation Accessories
- • Owner's Manual
Unstoppable Midrange Power That Hits With Authority
The PRV Audio 12MR2000X V2 is built for car audio enthusiasts who want serious output and clean control at high volume. With 2000 watts RMS capability and high efficiency design, it delivers commanding sound pressure that stays consistent even in demanding SPL systems. Its 100 dB sensitivity means you get loud, aggressive performance with less amplifier strain, making your setup more efficient while still pushing serious volume.
Clean Vocals and Tight Midbass You Can Actually Feel
This midrange driver is tuned for precision and clarity across a wide range, giving vocals and instruments strong definition without sounding harsh. With 6.60 mm Xmax, it maintains tight cone control for clean midbass impact and smooth vocal reproduction. The durable non pressed paper cone helps reduce breakup while keeping a natural tonal balance, so your system sounds powerful but still musical and controlled.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12MR2000X V2 lose clarity when I turn the volume all the way up?
Loss of clarity is usually caused by amplifier clipping, excessive gain, or crossover settings that allow low frequencies into the midrange. Proper tuning keeps vocals clean at high output.
- • Can I pair the PRV Audio 12MR2000X V2 with super tweeters?
Yes. Many users combine it with super tweeters or compression drivers to achieve crisp highs and a balanced high-output audio system.
- • Why do my vocals sound too bright on the 12MR2000X V2?
An overly aggressive equalizer, incorrect crossover settings, or tweeters playing too loudly can make vocals sound harsh. Fine tuning the DSP or EQ usually solves the issue.
- • Is the PRV Audio 12MR2000X V2 designed for competition sound systems?
Yes. It is a popular choice for SPL and demo vehicles because it delivers high-output midrange performance with excellent vocal projection.
- • Why does my speaker make a vibration noise at certain frequencies?
The vibration is often caused by loose speaker mounts, door panels, or nearby accessories rather than the speaker itself. Inspecting the installation can eliminate unwanted noise.
- • Can I install the PRV Audio 12MR2000X V2 in a speaker wall?
Yes. It is frequently used in speaker walls and custom audio builds where maximum output and vocal coverage are important.
- • Why does my amplifier shut down after several minutes of loud playback?
This can happen because of overheating, incorrect impedance, poor electrical connections, or inadequate charging system capacity. Checking the amplifier setup is recommended.
- • Does the PRV Audio 12MR2000X V2 perform better with a DSP?
A DSP is not required, but it allows precise adjustments to crossover frequencies, equalization, and time alignment for improved overall performance.
- • Why does one PRV Audio 12MR2000X V2 speaker sound different from the other?
Uneven sound is commonly caused by reversed polarity, unequal amplifier gain settings, damaged wiring, or different equalizer adjustments between channels.
- • How can I maximize the output of my PRV Audio 12MR2000X V2 without distortion?
Use a properly matched amplifier, apply the recommended crossover settings, avoid amplifier clipping, and fine tune your DSP or equalizer to achieve loud, clean, and accurate midrange performance.
- Diameter : 12 Inch
- Sensitivity : 100 dB
- Impedance : 8 Ohm
- Frequency Response : 100-5300 Hz
- Peak Power Handling : 4000 Watts
- RMS Power Handling : 2000 Watts
Features:
- Extreme Output Authority: Engineered to deliver 2000 watts RMS with high efficiency, this driver provides commanding sound pressure and consistent performance in demanding car audio systems.
- High Sensitivity Advantage: With 100 dB sensitivity, it produces powerful output with less amplifier strain, maximizing system efficiency and loudness.
- Precision Excursion Control: Featuring 6.60 mm Xmax, it maintains tight control over cone movement for impactful midbass and clean vocal reproduction.
- Advanced Cooling System: Extensive venting design keeps the 4 inch voice coil operating at optimal temperature, reducing power compression during long sessions.
- Heavy Duty Motor Structure: Built with a strong magnet assembly and high BL factor to ensure accurate control and dynamic response at high output levels.
- High Temperature Voice Coil: The 4 inch CCAW voice coil on a durable former supports intense power handling while maintaining low distortion.
- Smooth Vocal Clarity: Designed to reproduce detailed mids and vocals with excellent definition across a wide frequency range.
- Compact Installation Flexibility: Performs efficiently in small enclosures and custom door applications without sacrificing output capability.
- Durable Composite Cone Design: Reinforced non pressed paper cone structure minimizes breakup while maintaining natural tonal balance.
- Competition Ready Performance: Built for extreme SPL environments, delivering reliable high output with clean and controlled sound under heavy load.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 1000 Watts
- Continuous Program Power (RMS): 2000 Watts
- Max Peak Power: 4000 Watts
- Sensitivity 2.83V at 1m: 100 dB
- Frequency Response at -10dB: 100 – 5,300 Hz
- Voice Coil Diameter: 4″ (100 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 18.2 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 10.00 mm
- Frame Material: Die cast aluminum
- Overall Diameter: 12.28″ (312 mm)
- Front Mount Baffle Cutout: 11.14” (283 mm)
- Mounting Depth: 4.48″ (114 mm)
- Overall Depth: 4.96″ (126 mm)
- UPC: 810075521016
- Weight: 26.65
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
