PRV Audio 12MR2000X-NDY X-Series 12" 2000W RMS (4000W Peak Power Handling) at 8-Ohms, Midrange Neodymium Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" X-Series Midrange Neodymium Car Speaker
- • Installation Accessories
- • Owner's Manual
Extreme Midrange Power That Cuts Through Any System
The PRV Audio 12MR2000X-NDY is built for car audio enthusiasts who want serious volume with clean, controlled output. With 2000 watts RMS capability and a massive 100 dB sensitivity, this driver delivers intense sound pressure while keeping your system efficient. It is perfect for high SPL builds where you need vocals and mids to stay loud, clear, and dominant over heavy bass.
Fast, Accurate Sound With Tight Midbass Control
Powered by a lightweight neodymium motor, this speaker responds quickly and keeps every note sharp and precise. The 6.10 mm Xmax ensures controlled cone movement, giving you punchy midbass along with detailed vocal clarity. Its non pressed paper cone helps maintain a natural tone while reducing distortion, so your music sounds powerful but still clean even at high volume levels.
Built Strong for Heat, Pressure, and Tight Installs
This midrange driver is engineered for real world performance under extreme conditions. The 4 inch CCAW inside outside wound voice coil on a glass fiber former handles heat with ease, supported by an advanced ventilation system that keeps temperatures under control. A rigid yet lightweight design makes it ideal for custom door panels and compact enclosures, giving you high output performance without sacrificing space. Built for competition level use, it delivers reliable power, clarity, and durability every time you turn it up.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12MR2000X-NDY sound harsh at maximum volume?
Harsh sound is commonly caused by amplifier clipping, excessive equalizer settings, or crossover points that allow unwanted frequencies into the speaker. Proper tuning helps maintain clean and powerful vocals.
- • Can I upgrade from the standard version to the PRV Audio 12MR2000X-NDY?
Yes. Many users switch to the neodymium model to reduce weight while maintaining high output. Retuning the amplifier and crossover after installation is recommended.
- • Why do my vocals lose detail when the bass gets louder?
This usually happens when the subwoofer level is too high or the crossover frequencies overlap. Proper crossover adjustment helps the midrange remain clear and balanced.
- • Is the PRV Audio 12MR2000X-NDY suitable for speaker wall installations?
Yes. It is a popular choice for custom speaker walls, demo vehicles, and competition builds that require loud and detailed midrange performance.
- • Why does my speaker create a rattling sound even though it is mounted securely?
The vibration may come from nearby trim panels, wiring, speaker pods, or enclosure parts that resonate with the speaker's high output.
- • Can I use multiple PRV Audio 12MR2000X-NDY speakers with one amplifier?
Yes, provided the combined impedance matches the amplifier's supported load and it can supply enough clean RMS power for the entire system.
- • Why does my amplifier shut down while driving the 12MR2000X-NDY?
This may be caused by overheating, incorrect wiring, low impedance, or voltage drops in the electrical system. Inspecting the amplifier installation is recommended.
- • Does the neodymium motor improve installation?
Yes. The lighter motor design makes the speaker easier to handle and install, especially in large custom audio systems with multiple drivers.
- • Why does one PRV Audio 12MR2000X-NDY sound different from the other?
Differences in polarity, amplifier gain, equalizer settings, or speaker placement can result in uneven sound between the left and right channels.
- • How can I get the loudest clean vocals from the PRV Audio 12MR2000X-NDY?
Use a properly matched amplifier, optimize the crossover frequencies, fine tune your DSP or equalizer, and avoid amplifier clipping to achieve maximum output with excellent vocal clarity.
- Diameter : 12 Inch
- Sensitivity : 100 dB
- Impedance : 8 Ohm
- Frequency Response : 100-5200 Hz
- Peak Power Handling : 4000 Watts
- RMS Power Handling : 2000 Watts
Features:
- Extreme Output Midrange Power: Built to handle 2000 watts RMS, this driver delivers commanding output and dynamic performance for high level car audio systems.
- High Efficiency SPL Performance: With 100 dB sensitivity, it produces intense sound pressure with minimal amplifier demand for maximum system efficiency.
- Controlled Excursion Precision: Featuring 6.10 mm Xmax, it ensures accurate cone movement for punchy midbass and clean vocal reproduction.
- Neodymium Motor Technology: Lightweight high flux motor structure enhances magnetic strength, improves thermal efficiency, and reduces overall system weight.
- Advanced Cooling Ventilation: Extensive venting system maintains optimal voice coil temperature, reducing power compression during continuous high output use.
- 4 Inch High Power Voice Coil: CCAW inside outside wound voice coil on a glass fiber former delivers strong thermal handling and consistent performance under load.
- Clear and Detailed Vocal Reproduction: Designed for smooth midrange response with excellent clarity and accurate instrument reproduction at high volumes.
- Durable Composite Cone Structure: Non pressed paper cone minimizes distortion while maintaining natural tonal characteristics and long term reliability.
- Compact High Performance Design: Optimized for custom door panels and compact enclosures where space and weight efficiency are critical.
- Competition Ready Reliability: Engineered for extreme SPL environments, maintaining stability, control, and low distortion even at peak output levels.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 1000 Watts
- Continuous Program Power (RMS): 2000 Watts
- Max Peak Power: 4000 Watts
- Sensitivity 2.83V at 1m: 100 dB
- Frequency Response: 100 – 5,200 Hz
- Voice Coil Diameter: 4″ (100 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 18.20 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 12.0 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 12.28″ (312 mm)
- Front Mount Baffle Cutout: 11.14″ (283 mm)
- Mounting Depth: 4.47″ (113.7 mm)
- Overall Depth: 4.95″ (125.7 mm)
- UPC: 810075526950
- Weight: 13.45
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
