PRV Audio 15W1000 v2 ALTO Series 15" 500W RMS (1000W Peak Power Handling) at 8-Ohms, Midbass Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 15" ALTO Series Midbass Car Speakers
- • Installation Accessories
- • Owner's Manual
Serious Power That Hits Hard Every Time
The PRV Audio 15W1000 v2 is built for those who want real output and real impact. With 500 watts RMS and 1000 watts program power, this midbass driver delivers strong, aggressive sound that brings your system to life. From deep lows starting at 40 Hz to clean midbass punch, it fills your setup with energy while maintaining clarity across the range. Thanks to its 97 dB sensitivity, you get loud and powerful performance without pushing your amplifier too hard.
Tough Build Ready For Any Environment
This speaker is not just about power, it is built to last. The reinforced cone with M roll surround keeps everything tight and controlled even during heavy use, while the water resistant treatment makes it perfect for outdoor or harsh conditions. A large 3 inch copper voice coil with aluminum former ensures efficient cooling and long term reliability, backed by a heavy duty motor structure that stays stable under pressure. Whether in a car or outdoor setup, this driver is made to perform consistently and handle the demands of serious audio systems.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 15W1000 V2 not produce the deep bass I expected?
The woofer performs best in an enclosure that matches the recommended internal volume and tuning. An improperly designed enclosure can reduce low-frequency output.
- • Can I use the PRV Audio 15W1000 V2 for both music and live sound?
Yes. Many DIY builders install it in custom home speaker cabinets, provided the enclosure is properly designed for the woofer.
- • Why does my 15W1000 V2 make a popping sound during heavy bass?
Popping usually occurs when the woofer is driven beyond its intended excursion limits, often due to amplifier clipping or crossover settings that are too low.
- • Is the PRV Audio 15W1000 V2 a good choice for daily listening?
Yes. It is commonly used in daily systems that need powerful bass while maintaining reliable performance during extended listening sessions.
- • Why does my amplifier run out of power before the 15W1000 V2 reaches full output?
The amplifier may not provide enough continuous RMS power, or the charging system may be experiencing voltage drops under heavy load.
- • Can I install two PRV Audio 15W1000 V2 woofers in one enclosure?
Yes, provided the enclosure is designed for dual woofers with the proper internal volume and port tuning for optimal performance.
- • Why does my enclosure produce port noise at high volume?
Port noise is often caused by a port that is too small or improperly designed for the woofer's output. A correctly sized port can reduce turbulence.
- • Does the PRV Audio 15W1000 V2 require a break in period?
Some users notice small changes after several hours of playback, but enclosure design and proper tuning have a much greater impact on sound quality.
- • Why does my bass disappear when I open the trunk?
Changes in vehicle acoustics and enclosure orientation can affect how bass is distributed inside and outside the vehicle. Experimenting with enclosure placement may improve performance.
- • How can I maximize the bass output of my PRV Audio 15W1000 V2?
Use a properly matched amplifier, build the enclosure to the recommended specifications, apply the correct crossover and subsonic filter settings, and maintain a stable electrical system for the best results.
- Diameter : 15 Inch
- Sensitivity : 97 dB
- Impedance : 8 Ohm
- Frequency Response : 40-4000 Hz
- Peak Power Handling : 1000 Watts
- RMS Power Handling : 500 Watts
Features:
- Reinforced Cone Durability: Built with a strengthened cone structure and M roll surround to handle aggressive playback while maintaining structural integrity over time.
- High Power Performance Capability: Delivers 500 watts RMS and 1000 watts program power, providing strong output for demanding car audio systems.
- Water Resistant Cone Treatment: Engineered with a treated cone surface to resist moisture, making it suitable for outdoor use and harsh environments.
- Efficient 3 Inch Voice Coil System: Features a large copper voice coil with aluminum former to improve heat dissipation and ensure long term reliability.
- Enhanced Sensitivity Output: Produces 97 dB sensitivity, allowing powerful sound reproduction with efficient amplifier use.
- Extended Frequency Range Control: Covers 40 Hz to 4000 Hz, delivering solid low end presence and clear midbass transition in multi way setups.
- Heavy Duty Motor Structure: Designed with a robust magnet assembly and reinforced steel frame for stable and consistent performance under load.
- Optimized for Continuous Use: Developed to maintain sound accuracy and mechanical stability even during prolonged high power operation.
- Versatile Installation Application: Ideal for car audio builds and outdoor speaker systems requiring a reliable and high output 15 inch midbass driver.
Specifications:
- Nominal Diameter: 15″ (381 mm)
- Nominal impedance: 8 Ohms
- Rated AES Power Handling (RMS): 500 Watts
- Program Power: 1000 Watts
- Sensitivity 2.83V at 1m: 97 dB
- Frequency Response at -10dB: 40 – 4,000 Hz
- Voice Coil Diameter: 3″ (76 mm)
- Voice Coil Wire: Copper
- Voice Coil Winding Depth: 16.5 mm
- Former Material: Aluminum
- Magnetic Gap Depth: 7.5 mm
- Frame Material: Stamped Steel
- Overall Diameter: 15.20” (386 mm)
- Front Mount Baffle Cutout: 13.90” (353 mm)
- Mounting Depth: 5.82” (148 mm)
- Overall Depth: 6.18” (157 mm)
- UPC: 799928734851
- Weight: 12.2
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
