PRV Audio 8MB500 MR Series 8" 500W RMS (1000W Peak Power Handling) 8 Ohm, Midrange Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Hard Hitting Midbass That You Can Feel
The PRV Audio 8MB500 is built to bring serious impact to your system with deep, punchy midbass that adds real energy to your music. It delivers smooth low frequency extension while keeping vocals clear and present, giving your setup a fuller and more aggressive sound. Perfect for anyone who wants that strong, chest hitting response without losing detail.
Power Ready Performance That Stays Consistent
With up to 500 Watts RMS program power handling, this speaker is made to keep up when the volume goes up. It handles demanding conditions without losing control, giving you reliable output even during long and loud sessions. The wide frequency range from 75 Hz to 7,500 Hz makes it easy to blend into multi way systems, keeping everything balanced and seamless across your setup.
Engineered Tough for Long Lasting Use
Built with a natural damped paper cone and triple roll cloth surround, the 8MB500 keeps cone movement smooth and accurate for clean sound reproduction. Its advanced motor design delivers strong magnetic force without adding bulk, while the CCAW voice coil, reinforced spider, and heavy duty steel frame ensure durability you can count on. This is the kind of speaker that is ready for daily use and high output without backing down.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 8MB500 have very little midbass after installation?
This is often caused by incorrect crossover settings, poor speaker placement, or an enclosure that is not suited for the speaker. Proper tuning and installation can significantly improve midbass performance.
- • Can I run the PRV Audio 8MB500 on my factory head unit?
The speaker will produce sound, but it will not reach its full potential without an external amplifier. A dedicated amplifier provides the power needed for better output and dynamics.
- • Why does the 8MB500 distort when I increase the volume?
Distortion is commonly caused by amplifier clipping, excessive bass boost, or sending frequencies below the speaker's recommended operating range. Adjusting the crossover and gain settings usually solves the issue.
- • Is the PRV Audio 8MB500 suitable for daily music listening?
Yes. Many users enjoy it for daily driving because it delivers strong midbass impact and clear vocals when paired with the right tweeters and subwoofers.
- • Why does my door panel vibrate after installing the 8MB500?
The speaker can generate strong midbass energy that causes loose panels to rattle. Adding sound deadening material and securing interior trim can reduce unwanted vibrations.
- • Can the PRV Audio 8MB500 replace a subwoofer?
No. The 8MB500 is designed for midbass frequencies and cannot reproduce the deep low bass of a dedicated subwoofer. It works best as part of a complete audio system.
- • My amplifier gets hot while powering the 8MB500. Is that normal?
Some heat is expected during extended use, but excessive temperatures may indicate an incorrect speaker impedance, poor ventilation, or amplifier overload. Checking your wiring and amplifier specifications is recommended.
- • Why do my vocals sound buried with the PRV Audio 8MB500?
This can happen if the crossover point is too low, the tweeters are overpowering the system, or the equalizer settings are not balanced. Fine tuning the system can restore vocal clarity.
- • Can I use multiple PRV Audio 8MB500 speakers on one amplifier?
Yes, as long as the total impedance matches the amplifier's supported load and the amplifier can provide enough clean RMS power for all connected speakers.
- • How do I make the PRV Audio 8MB500 hit harder without causing damage?
Use a properly sized amplifier, set the crossover correctly, avoid clipping, and install the speaker securely in a well-treated mounting location. These steps help maximize output while protecting the speaker.
- Diameter : 8 Inch
- Sensitivity : 95 dB
- Impedance : 8 Ohm
- Frequency Response : 75-7500 Hz
- Peak Power Handling : 1000 Watts
- RMS Power Handling : 500 Watts
Features:
- Deep Midbass Authority: Engineered to deliver strong and punchy midbass response with smooth low frequency extension for dynamic car audio performance.
- High Power Handling Capacity: Supports up to 500 Watts RMS program power, ensuring consistent output and durability even at extreme listening levels.
- Wide Frequency Coverage: Operates efficiently from 75 Hz to 7,500 Hz, allowing seamless integration in multi way systems with strong vocal presence.
- Natural Cone and Suspension Design: Utilizes a damped paper cone with triple roll cloth surround to maintain linear cone movement and accurate sound reproduction.
- Advanced Motor Efficiency: Features a compact yet powerful motor structure that maximizes magnetic strength without adding unnecessary bulk.
- Durable High Temperature Components: Built with CCAW voice coil, reinforced spider, and heavy duty steel frame for reliable long term performance in demanding audio setups.
Specifications:
- Nominal Diameter: 8″ (203 mm)
- Nominal Impedance: 8 Ohm
- Nominal Power Handling: 250 Watts
- Continuous Program Power (RMS): 500 Watts
- Max Peak Power: 1000 Watts
- Sensitivity (2.83V/1m): 95 dB
- Recommended Hi Pass Crossover: 95 Hz, 12 dB per Octave
- Frequency Response (-10 dB): 75 – 7,500 Hz
- Voice Coil Diameter: 2″ (50 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 12.0 mm
- Former Material: Kapton
- Magnetic Gap Depth: 6.0 mm
- Frame Material: Stamped Steel
- UPC: 810075524611
- Weight: 3
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
