PRV Audio 8MR600X MR X Series 8" 300W RMS (600W Peak Power Handling) 8 Ohm, Mid Range Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Built to Hit Hard and Stay Loud All Day
If you’re serious about building a system that doesn’t just play music but dominates the street, the PRV Audio 8MR600X Mid Range Car Speaker is built exactly for that mission. With an ultra high 98 dB sensitivity, it delivers insane loudness with very little amplifier power, making it perfect for competitive SPL setups. Add in a massive 600W RMS power handling capability and you’ve got a midrange that stays strong and controlled even when you keep pushing it harder and longer.
Wide Band Punch with Real Midbass Authority
This speaker is tuned for serious performance with an extended 85 Hz to 8,500 Hz frequency range, giving you deep midbass impact and clean vocal detail in one package. The high Xmax design means it can move more air, giving you stronger low mid punch that you can actually feel inside the cabin. Whether you’re running loud daily or lining up at a sound competition, this midrange keeps everything tight, powerful, and controlled without falling apart when the volume climbs.
Built Tough with Pro Level Engineering Inside
Under the hood, the dual layer 2 inch voice coil with CCAW on a polyimide former gives you strong thermal stability so it can handle heavy load sessions without breaking down. The ventilated motor system helps push heat out, reducing power compression and keeping output consistent even after long play. A die cast aluminum frame keeps everything rigid and resonance free, while the high flux magnet assembly delivers fast transient response and precise control. Finished with a double roll suspension system for smooth linear movement and optimized for full 3 way system builds, this midrange is ready to anchor a serious pro audio setup that hits hard and stays clean.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 8MR600X sound distorted even though the volume is not very high?
Distortion can occur if the amplifier is clipping, the crossover is set incorrectly, or the source audio is heavily compressed. Proper system tuning usually resolves the issue.
- • Can I use the PRV Audio 8MR600X for both music and PA style systems?
Yes. Many users install the 8MR600X in high-output car audio systems as well as custom applications that require loud, clear midrange reproduction.
- • Why does my 8MR600X have strong vocals but very little bass?
The 8MR600X is engineered for midrange frequencies rather than deep bass. Pairing it with dedicated midbass drivers or subwoofers creates a more complete sound system.
- • Is it normal for the PRV Audio 8MR600X to become warm after extended use?
A moderate amount of heat is expected during long listening sessions. Excessive heat may indicate overpowering, amplifier clipping, or improper crossover settings.
- • Why do my door panels rattle after installing the PRV Audio 8MR600X?
The speaker's high output can expose loose interior panels and trim pieces. Adding sound deadening material and tightening mounting hardware can reduce vibrations.
- • Can I wire multiple PRV Audio 8MR600X speakers to one amplifier?
Yes, provided the final impedance stays within the amplifier's supported range and the amplifier can deliver adequate clean power to all connected speakers.
- • Why does one PRV Audio 8MR600X sound weaker than the other?
Uneven performance is commonly caused by reversed polarity, loose wiring, damaged cables, or different amplifier gain settings between channels.
- • Will the PRV Audio 8MR600X fit in my factory speaker location?
Fitment depends on your vehicle's mounting depth, cutout size, and available clearance. Measuring the installation space before purchasing is recommended.
- • Why does my amplifier shut down while powering the 8MR600X?
This can happen because of overheating, incorrect speaker impedance, poor electrical connections, or amplifier overload. Checking the wiring and amplifier specifications is essential.
- • How can I get the best performance from my PRV Audio 8MR600X?
Use a properly matched amplifier, apply the recommended crossover settings, mount the speaker securely, and fine tune the equalizer to achieve loud, clean, and reliable midrange performance.
- Diameter : 8 Inch
- Sensitivity : 98 dB
- Impedance : 8 Ohm
- Frequency Response : 85-8500 Hz
- Peak Power Handling : 600 Watts
- RMS Power Handling : 300 Watts
Features:
- Ultra High 98 dB Sensitivity: Delivers extremely loud output with minimal amplifier power, ideal for competitive SPL and high efficiency systems.
- Massive 600W RMS Power Handling: Supports 300 watts nominal and up to 600 watts continuous program power for sustained high output performance.
- Extended Frequency Response Range: Covers approximately 85 Hz to 8,500 Hz for strong midbass impact and detailed vocal reproduction.
- Dual Layer 2 Inch Voice Coil: CCAW voice coil on polyimide former provides high thermal stability and improved power handling under heavy load.
- Ventilated Motor System Design: Optimized airflow through basket and magnetic structure reduces heat buildup and power compression.
- High Xmax Midbass Capability: Designed with extended excursion for stronger midbass output and improved dynamic performance.
- Die Cast Aluminum Frame Construction: Rigid basket structure improves durability and reduces unwanted resonance during high output operation.
- High Flux Magnet Assembly: Powerful motor design ensures strong control, fast transient response, and low distortion performance.
- Double Roll Suspension System: Dimpled surround design enhances linear movement and maintains smooth frequency response under high excursion.
- Professional 3 Way System Integration: Optimized for use in high output midbass, midrange, and tweeter configurations in custom audio builds.
Specifications:
- Nominal Diameter: 8″ (203 mm)
- Nominal Impedance: 8 Ohms
- AES Power Handling (RMS): 300 W
- Program Power: 600 W
- Sensitivity (2.83V/1m): 98 dB
- Recommended Hi-Pass Crossover: 160 Hz (12 dB/oct)
- Frequency Response (-10 dB): 85 – 8,500 Hz
- Voice Coil Diameter: 2.0″ (51 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 14.5 mm
- Former Material: Polyimide
- Magnetic Gap Depth: 8.0 mm
- Frame Material: Die-cast aluminum
- UPC: 810075525090
- Weight: 5
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.