PRV Audio 8MR600X-4 MR X Series 8" 600W RMS (1200W Peak Power Handling) 4 Ohm, Mid Range Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Wide Range Performance With Real Midbass Authority
Featuring a powerful magnet assembly for high flux concentration, a ventilated basket design that enhances heat dissipation and reduces power compression, and a dual-layer 2″ CCAW voice coil on a polyimide former, this speaker delivers precise, dynamic sound with high sensitivity and minimal distortion.
Built to Hit Hard and Stay Controlled
This midrange is designed to cover a wide 85 Hz to 8,500 Hz frequency range, giving you strong midbass punch and clear vocal presence in one driver. With a massive 600W RMS power handling capability, including 300 watts nominal and up to 600 watts continuous program power, it’s ready for demanding audio setups that stay loud for long sessions. The 98 dB sensitivity means it gets extremely loud with minimal amplifier power, making it perfect for efficient high output builds.
Engineered Cooling and Durability for Pro Audio Systems
Inside, the ventilated cooling architecture helps manage heat buildup so performance stays consistent even under heavy load. The dual layer 2 inch CCAW voice coil on a polyimide former adds long term durability and stable thermal handling, so you can push it without worry. Its lightweight paper cone delivers fast response and natural tone, while the high excursion capability keeps midbass strong and controlled. Designed for small enclosure optimization and ready for 2 way or 3 way pro audio integration, this speaker fits right into serious car audio systems that demand power, clarity, and reliability all in one package.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 8MR600X-4 clip before reaching full volume?
The issue is usually related to amplifier gain being set too high, insufficient amplifier power, or a weak electrical system. Proper gain adjustment and stable voltage can improve performance.
- • Can I install the PRV Audio 8MR600X-4 in my truck doors?
Yes, as long as the mounting depth and cutout size match your vehicle. Many users also install sound deadening material to improve sound quality and reduce vibrations.
- • Why do voices sound too sharp on my 8MR600X-4?
Sharp vocals are often caused by aggressive equalizer settings or crossover points that are not properly adjusted. Fine tuning the DSP or EQ usually creates a smoother response.
- • Does the PRV Audio 8MR600X-4 need a dedicated DSP?
A DSP is not required, but many users find that it helps optimize crossover points, time alignment, and equalization for better overall performance.
- • Why does my speaker lose clarity after playing for an hour?
This may happen if the amplifier overheats, enters thermal protection, or begins clipping during extended listening sessions. Ensuring proper airflow and clean power helps maintain consistent sound.
- • Can I combine the PRV Audio 8MR600X-4 with horn tweeters?
Yes. It is commonly paired with horn tweeters or compression drivers to create a loud and well-balanced high-output audio system.
- • Why does my 8MR600X-4 make a clicking sound on loud bass notes?
Clicking noises can occur when low frequencies reach the speaker because the crossover is set too low or the amplifier is clipping. Raising the high-pass filter often solves the problem.
- • Is the PRV Audio 8MR600X-4 suitable for demo vehicles?
Yes. Many demo vehicle builders choose it because of its ability to deliver powerful, high-efficiency midrange output at elevated listening levels.
- • Why is my amplifier getting hotter after replacing my old speakers with the 8MR600X-4?
This may indicate an impedance mismatch, incorrect wiring, or increased amplifier workload. Verify the wiring configuration and confirm that the amplifier is rated for the connected load.
- • How do I make the PRV Audio 8MR600X-4 sound louder without sacrificing clarity?
Use a quality amplifier with adequate RMS power, apply proper crossover settings, avoid excessive equalization, and ensure the speaker is mounted securely for maximum clean output.
- Diameter : 8 Inch
- Sensitivity : 98 dB
- Impedance : 4 Ohm
- Frequency Response : 85-8500 Hz
- Peak Power Handling : 1200 Watts
- RMS Power Handling : 600 Watts
Features:
- High Flux Motor Assembly: Strong magnetic structure delivers accurate cone control and reduced distortion at high volume.
- Extended Frequency Coverage: Operates from approximately 85 Hz to 8,500 Hz for clear vocals and strong midbass response.
- Ventilated Cooling Architecture: Engineered airflow design reduces heat buildup and maintains consistent performance under load.
- Lightweight Cone Construction: Paper cone design provides fast transient response and natural tonal balance.
- High Excursion Capability: Maintains clean output during demanding midbass movement with controlled cone behavior.
- High Sensitivity 98 dB Output: Produces loud and efficient sound levels with minimal amplifier power requirements.
- 600W RMS Power Handling Capacity: Supports 300 watts nominal and up to 600 watts continuous program power for demanding audio use.
- Small Enclosure Optimization: Designed to perform in compact installations while maintaining clarity and midrange impact.
- Dual Layer 2 Inch Voice Coil System: CCAW voice coil on polyimide former ensures thermal stability and long term durability.
- Pro Audio Integration Ready: Built for 2 way and 3 way car audio systems requiring strong midrange presence and clarity.
Specifications:
- Nominal Diameter: 8″ (203 mm)
- Nominal Impedance: 4 Ohms
- AES Power Handling (RMS): 300 W
- Program Power: 600 W
- Sensitivity (2.83V/1m): 98 dB
- Recommended Hi-Pass Crossover: 160 Hz (12 dB/oct)
- Frequency Response (-10 dB): 85 – 8,500 Hz
- Voice Coil Diameter: 2.0″ (51 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 14.2 mm
- Former Material: Polyimide
- Magnetic Gap Depth: 8.0 mm
- Frame Material: Die-cast aluminum
- UPC: 810075525106
- Weight: 5
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
