PRV Audio RS500 BASS 1000W Max Power 2 Ohm, Class-D Mono Subwoofer Car Amplifier
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • RS Series 1000W Max Power 2 Ohm, Class-D Mono Subwoofer Car Amplifier
- • Owner's Manual
Real Bass First, Numbers Second
The PRV Audio RS500 BASS 2 Ohm Class D Mono Subwoofer Amplifier is built for listeners who care more about real world bass feel than exaggerated specs. It is tuned around usable low end impact, giving you tight and controlled bass that actually translates in daily driving conditions. Instead of chasing peak numbers, this amplifier focuses on delivering consistent punch and weight that makes every track feel fuller and more alive.
Simple Setup With Strong Everyday Performance
This amplifier is designed for straightforward subwoofer systems where clean bass reinforcement matters more than complexity. It delivers a focused 1 channel output that works perfectly for compact daily setups and entry level competition builds. Copper reinforced power architecture helps keep energy stable during bass peaks, preventing voltage drops that can weaken performance. It also balances SPL style punch with daily driving comfort, so your system can hit hard without losing control in normal listening.
Clean Integration With Smart Control and Reliable Protection
The RS500 BASS is made for easy installation into both factory and aftermarket systems thanks to high level input support with auto signal sensing. Its bass shaping controls are designed to refine low end texture instead of just boosting volume, giving you more control over how your bass feels in the cabin. A heat resistant compact chassis keeps temperatures stable in tight installs, while a signal integrity focused layout reduces distortion at higher volume levels. Add in a protection system designed for real automotive conditions and a lightweight build for flexible mounting, and you get a subwoofer amplifier that delivers reliable bass performance day after day without losing quality over time.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio RS500 BASS 2 OHM keep entering protection mode?
Protection mode is usually triggered by overheating, poor grounding, incorrect speaker impedance, or a short in the speaker wiring. Inspect the entire installation before restarting the amplifier.
- • Can I use the RS500 BASS 2 OHM with a factory car stereo?
Yes, many users successfully install it with factory head units by using the proper signal connections and ensuring the amplifier receives a clean audio signal.
- • Why is my subwoofer not hitting as hard as I expected?
Weak bass is often caused by incorrect gain settings, improper crossover adjustment, an unsuitable enclosure, or a subwoofer wired to the wrong impedance.
- • Why does my amplifier turn off after playing bass for several minutes?
This may happen because of thermal protection, low battery voltage, or insufficient airflow around the amplifier. Improving ventilation and checking the charging system often solves the issue.
- • Can I connect two subwoofers to the RS500 BASS 2 OHM?
Yes, as long as the combined impedance and power requirements match the amplifier's recommended operating specifications.
- • Why do I hear a buzzing noise through my subwoofer after installation?
Buzzing is commonly caused by poor grounding, damaged RCA cables, electrical interference, or loose audio connections. Inspecting the wiring usually resolves the problem.
- • Why does my amplifier get hot even when I am not playing at maximum volume?
Heat buildup can result from limited airflow, improper speaker loads, or gain settings that are higher than necessary. Make sure the amplifier has adequate ventilation.
- • Why does my bass sound distorted during loud songs?
Distortion is often caused by amplifier clipping, excessive bass boost, incorrect gain adjustment, or the subwoofer reaching its performance limits.
- • What is the most common installation mistake with the RS500 BASS 2 OHM?
One common mistake is wiring the subwoofer to the wrong impedance, which can reduce amplifier performance or activate its protection circuitry.
- • How can I get the cleanest bass from the RS500 BASS 2 OHM?
Use the correct enclosure, match the subwoofer impedance properly, adjust the gain and low pass filter carefully, use quality wiring, and maintain a stable electrical system for consistent bass performance.
- Maximum Power : 1000 Watts
- Low Frequency Response : 10 Hz
- High Frequency Response : 200 Hz
- Number of Channels : 1
- Frequency Response : 10-200 Hz
- RMS Power Output : 500 Watts
- Amplifier Class : D
- Fuse Rating : 35 A
Features:
- Built Around Real Bass Delivery, Not Numbers: The RS500 is tuned to prioritize usable low-end impact in real listening conditions rather than exaggerated peak output claims.
- Designed for Simple, Strong Subwoofer Systems: Focused on clean 1-channel bass reinforcement for compact daily setups and entry competition systems.
- Copper-Reinforced Power Architecture: Internal high-current design improves stability during bass peaks without voltage collapse in typical installs.
- Balanced SPL and Daily Driving Character: Delivers punch and weight for street systems while still maintaining control for everyday listening.
- Effortless Integration Into Factory or Aftermarket Audio: High-level input support allows direct connection without requiring full system replacement.
- Bass Character Shaping Instead of Just Boosting: Tuning controls are designed to refine low-end texture rather than simply increase loudness.
- Heat-Resistant Compact Engineering: Small chassis is optimized to maintain thermal stability in confined installation spaces.
- Signal Integrity Focused Layout: Internal design reduces distortion buildup at higher listening levels for cleaner bass reproduction.
- Protection System Tuned for Real Use Conditions: Responds dynamically to electrical stress situations common in automotive environments.
- Lightweight Build for Flexible Installations: Designed for hidden mounting, under-seat installs, or tight enclosure integration.
- Frequency Control Designed for Subwoofer Accuracy: Filtering is optimized to keep bass tight instead of muddy or overextended.
- Daily Reliability with SPL Capability: Built to survive repeated heavy use without drifting performance over time.
Specifications:
- Impedance: 2 Ohm
- Channels: 1 Channel
- Rated RMS Power at 14.0 V at 2 Ohm: 500 Watts
- Rated RMS Power at 14.0 V at 4 Ohm: 320 Watts
- Average Efficiency: 80%
- Operating Voltage: 9 to 16 Volts
- Musical Current Draw: 22 A
- Minimum Power Wire Input: (OFC) 8 Gauge wires
- Protection Fuse or Circuit Breaker: 35 Amps
- Minimum Speaker Wire Output: 16 Gauge
- Frequency Response(-3dB): 10 – 200 Hz
- Min. Input Sensitivity for Max. Output: 200 mV
- Signal Input: 1 Pair RCA
- Signal to Noise: >90 dB
- Protection System: Shortage on Output
- Heat Sink Type: Heavy Duty Cast Aluminum
- Dimensions (W x D x H): 4.75″ x 6.25″ x 2.25″
- UPC: 810075526462
- Weight: 2.31
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
