PRV Audio MDX2000.2 1 Ohm MDX Series 2 Channel 4000W Max Power, Class-D Full Range Car Amplifier
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 4000W Max Power 1 Ohm, Class-D Full Range Car Amplifier
- • Owner's Manual
Double the Punch, Full-Range Monster Output
If you are serious about building a system that hits hard and stays clean, the PRV Audio MDX1800.1 2 Ohm Class-D Full Range Mono Amplifier is built to deliver exactly that kind of performance. With an extreme 2000W RMS total output in a 2 x 1000W at 1 ohm stereo configuration, this amp brings massive full-range power that can handle subs, mids, and highs with control and authority. Whether you run it stereo or bridged for up to 2000W at 2 ohms, it gives you flexibility and raw output in one compact unit.
Compact Frame Built for Big System Energy
This amplifier is not just about power, it is built for real system control and reliability. With support for complex multi-speaker wiring, you can run up to 16 x 8 ohm speakers and scale your setup the way you want. The real-time LED monitoring system keeps you updated on power, protection, and clipping so you always know what is happening in your system. Add in a full 4-way protection suite, surface mount durability for vibration resistance, and an integrated cooling fan for thermal stability, and you get an amp that stays strong, safe, and ready for anything you throw at it.
Compact Frame Built for Big System Energy
This MDX Series amplifier is designed for installers who want maximum power without sacrificing space. Its ultra-compact reinforced chassis, featuring a heavy-duty mini heatsink measuring 8.50” x 5.90” x 2.60”, fits cleanly into tight builds across cars, motorcycles, and motorsport setups. Inside, advanced digital Class-D full-range technology keeps sound crisp and efficient while reducing heat buildup, so you can push hard without worrying about performance drop or thermal stress.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio MDX2000.2 1 Ohm keep entering protection mode after playing for a while?
Protection mode is commonly caused by overheating, low battery voltage, incorrect speaker impedance, or poor ground connections. Inspect your wiring and ensure the amplifier has proper ventilation.
- • Can I bridge the MDX2000.2 1 Ohm for maximum output?
Yes, if the amplifier supports bridged operation. Always follow the recommended wiring instructions and use the correct speaker impedance to prevent damage or protection mode.
- • Why is my amplifier powered on but my speakers have no sound?
This can happen because of disconnected RCA cables, blown speakers, incorrect crossover settings, or loose speaker wire connections. Check each component one at a time.
- • Why do my speakers distort before the volume reaches its maximum?
Distortion is usually caused by excessive gain settings, amplifier clipping, damaged speakers, or a poor quality audio signal from the head unit.
- • Can I use the MDX2000.2 1 Ohm for midrange speakers instead of subwoofers?
Yes, many installers use this amplifier for powerful midrange speakers when the crossover settings and speaker impedance are configured correctly.
- • Why does my amplifier get extremely hot during normal use?
Poor airflow, low impedance speaker loads, or extended high power playback can increase operating temperatures. Install the amplifier where air can circulate freely.
- • Why do I hear alternator whine after installing the amplifier?
Alternator noise is often caused by poor grounding, damaged RCA cables, or signal cables routed too close to the main power wire.
- • What is the most common installation mistake with the MDX2000.2 1 Ohm?
Many users set the amplifier gain too high, which can cause clipping, reduce sound quality, and increase the risk of speaker damage.
- • Can the MDX2000.2 1 Ohm be installed in custom truck or powersports audio systems?
Yes, it is frequently used in trucks, Jeeps, UTVs, motorcycles, and other custom audio builds where strong two channel performance is needed.
- • How can I get the best sound quality from the MDX2000.2 1 Ohm?
Use quality power and RCA cables, match the speakers to the correct impedance, tune the gain and crossover carefully, maintain stable battery voltage, and provide good airflow for reliable long term performance.
- High Frequency Response : 4000 Hz
- Number of Channels : 2
- RMS Power Output : 2000 Watts
- Amplifier Class : D
Features:
- Extreme High-Output Stereo Power Architecture: Engineered to deliver 2000W RMS total output with 2 x 1000W at 1 Ohm, providing powerful and precise full-range performance for advanced audio systems.
- Compact MDX Series High-Density Engineering: Designed for installations where space is limited, combining ultra-high power output with a compact and efficient chassis design.
- Advanced Digital Class-D Full-Range Technology: Delivers high-definition sound reproduction with improved efficiency, reduced thermal load, and stable performance under continuous high-demand use.
- Reinforced Ultra-Compact Chassis Design: Features a heavy-duty mini heatsink measuring 8.50” x 5.90” x 2.60”, allowing flexible installation in vehicles, motorcycles, and motorsport applications.
- Flexible 2-Channel and Bridged Operation: Supports stereo output or bridged mono configuration delivering up to 2000W RMS at 2 Ohm for high-power speaker systems.
- Multi-Speaker Wiring Capability: Enables complex configurations including multiple drivers per channel, such as up to 16x 8 Ohm speakers for scalable system design.
- Intelligent 4-Way Protection System: Integrated protection against high voltage, low voltage, short circuit, and overcurrent conditions for safe and reliable operation.
- Real-Time LED Monitoring Interface: Built-in power, protection, and clip indicators provide accurate system status feedback for precise tuning and performance control.
- Advanced Surface Mount Component Construction: Enhances vibration resistance, durability, and signal integrity for demanding mobile and motorsport environments.
- Integrated Cooling Fan Thermal Management: Ensures stable operating temperatures under sustained high-output use, maintaining consistent performance and reliability.
- Lightweight High-Power Build Design: Weighing only 4 lbs, it delivers an exceptional power-to-weight ratio for high-performance custom installations.
Specifications:
- Model: MDX2000.2 1 Ohm
- Amplifier Type: Class D Digital
- Channels: 2 Channel / 1 Channel Bridged
RMS Power Output:
- 2 x 1000 Watts @ 1 Ohm
- 1 x 2000 Watts @ 2 Ohm (Bridged)
Minimum Impedance:
- 1 Ohm per channel
- 2 Ohm bridged
- Frequency Response: Full Range Output
Cooling System:
- Heavy-duty heatsink
- Built-in cooling fan
Dimensions:
- Width: 8.50 inches
- Length: 5.90 inches
- Height: 2.60 inches
Technology:
- Surface mount components
- Brazilian digital Class D design
Application:
- Cars, trucks, motorcycles, ATVs, UTVs, Slingshots
- UPC:
- Weight: 5
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
