PRV Audio MDX2000.2 2 Channel 4000W Max Power, Class-D Full Range Car Amplifier-Made in Brazil
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 4000W Max Power 2 Channel 4000W Max Power, Class-D Full Range Car Amplifier-Made in Brazil
- • Owner's Manual
Serious Dual-Channel Power That Delivers Every Time
If you are looking for an amplifier that brings both strength and clarity, the PRV Audio MDX2000.2 2 Ohm Class-D Full Range Amplifier is ready to step up. With a massive 2000W RMS total output pushing 2 x 1000W at 2 ohms, this amp gives you strong, accurate full-range sound across both channels. Whether you are powering mids, highs, or a full system, it delivers clean and controlled audio that stays consistent even when you turn it up.
Flexible Setup and Reliable Everyday Control
This amplifier gives you the flexibility to build your system your way. Run it in stereo for balanced output or bridge it to push up to 2000W RMS at 4 ohms when you need extra power. It supports multiple speaker wiring configurations, making it easy to expand your setup while keeping sound clean and evenly distributed. With built-in high-level input for factory systems, advanced surface mount durability, and an active cooling fan to keep temperatures in check, this amp is designed to stay reliable, powerful, and ready for daily use or competition-level performance.
Compact Build Packed With High-Efficiency Performance
This MDX Series amplifier is built for setups where space matters but performance cannot be compromised. Its compact chassis with a reinforced mini heatsink measuring 8.50” x 5.90” x 2.60” makes it easy to install in tight areas across cars and motorsport builds. The advanced digital Class-D platform keeps everything efficient, reducing heat while maintaining stable power output during long listening sessions. At just 3.95 lbs, it offers serious power without adding unnecessary weight to your build.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio MDX2000.2 2 Ohm keep shutting off while playing music?
The amplifier may be entering protection mode because of overheating, unstable battery voltage, poor grounding, or speakers wired below the recommended 2 ohm load. Check all wiring and electrical connections.
- • Can I use the MDX2000.2 2 Ohm to power two high power midrange speakers?
Yes, many users pair this amplifier with powerful midrange speakers. Make sure the speakers match the amplifier's impedance and power capabilities for the best results.
- • Why does one channel sound weaker than the other?
Uneven output is often caused by loose RCA connections, incorrect gain settings, damaged speaker wiring, or a failing speaker. Swap components to help isolate the problem.
- • Why does my amplifier get hot even when the volume is moderate?
Limited airflow, incorrect speaker impedance, or extended playback can increase amplifier temperature. Proper ventilation helps maintain reliable performance.
- • Can I bridge the MDX2000.2 2 Ohm for a single speaker application?
Yes, if the amplifier is designed for bridged operation. Always follow the recommended wiring instructions and impedance requirements provided for the amplifier.
- • Why do I hear popping noises when switching songs?
Popping sounds can be caused by poor RCA connections, amplifier gain that is set too high, source unit issues, or loose speaker wiring.
- • Why is there a whining noise that changes with engine speed?
This is commonly caused by a ground loop, poor amplifier grounding, damaged RCA cables, or signal wires routed too close to power cables.
- • What installation mistake causes the most performance issues with the MDX2000.2 2 Ohm?
Using undersized power and ground cables is a common mistake that can lead to voltage drop, overheating, and reduced amplifier performance.
- • Can the MDX2000.2 2 Ohm be used in motorcycles, boats, or off road vehicles?
Yes, many custom installers use this amplifier in compact audio systems where reliable two channel power and efficient use of space are important.
- • How can I maximize the sound quality of the MDX2000.2 2 Ohm?
Use quality wiring, maintain a stable charging system, match the speakers to the correct impedance, fine tune the gain and crossover settings, and mount the amplifier in a location with good airflow for dependable long term performance.
- Maximum Power : 4000 Watts
- Low Frequency Response : 10 Hz
- High Frequency Response : 22000 Hz
- Number of Channels : 2
- Frequency Response : 10-22000 Hz
- RMS Power Output : 2000 Watts
- Amplifier Class : D
- Fuse Rating : 100 A
Features:
- High-Power Dual-Channel Performance Core: Engineered to deliver 2000W RMS total output with 2 x 1000W at 2 Ohm, ensuring strong and accurate full-range sound reproduction.
- Compact MDX Series Space-Saving Design: Built for high-performance systems with limited installation space, offering maximum output in a compact footprint.
- Advanced Digital Class-D Efficiency Platform: Provides clean, high-definition audio with improved efficiency, reduced heat generation, and stable long-term operation.
- Reinforced Mini Heatsink Chassis Construction: Features a heavy-duty compact heatsink measuring 8.50” x 5.90” x 2.60”, allowing flexible mounting in vehicles and motorsport applications.
- Flexible Stereo and Bridged Configuration Capability: Supports 2-channel operation or bridged mono output delivering up to 2000W RMS at 4 Ohm for high-demand systems.
- Versatile Multi-Speaker Wiring Support: Enables multiple speaker configurations including parallel setups for 4 Ohm and 8 Ohm drivers with optimized power distribution.
- High Output Per Channel Performance: Capable of delivering 1000W RMS per channel at 2 Ohm, ensuring strong and consistent audio output across both channels.
- Advanced Surface Mount Component Engineering: Enhances durability, vibration resistance, and signal clarity for demanding mobile audio environments.
- Integrated High-Level Input Compatibility: Allows seamless connection to factory head units without the need for external signal converters.
- Active Cooling System with Built-In Fan: Maintains optimal operating temperatures during continuous high-output performance.
- Lightweight High-Power Construction: Weighing only 3.95 lbs, it offers an excellent balance of power and installation flexibility.
Specifications:
- Impedance: 2 Ohm per Channel
- Channels: 2 Channel
- Rated RMS Power at 14.0 V at 2 Ohm: 2x 1000 Watts RMS
- Rated RMS Power at 14.0 V at 4 Ohm: 2x 660 Watts RMS
- Bridged Rated RMS Power at 14.0 V at 4 Ohm: 1x 2000 Watts RMS
- Average Efficiency: 90%
- Operating Voltage: 9 to 16 Volts
- Musical Current Draw: 89 A
- Minimal Power Wire Input: (OFC) 4 Gauge wires
- Built-in Crossover: Fixed HPF & LPF at 80 Hz
- Minimal Speaker Wire Output: 12 Gauge
- Frequency Response(-3dB): 10 – 22,000 Hz
- Min. Input Sensitivity for Max. Output: 0.2 to 4v
- Signal Input: RCA Cables
- Signal to Noise: >90 dB
- Protection System: High Temperature / Short circuit on Output
- Heat Sink Type: Mini Heavy Duty Cast Aluminum
- Dimensions (Width x Depth x Height): 8.50″ x 5.90″ x 2.60″
- Weight: 3.95 Lbs
- UPC: 810075524260
- Weight: 3.95
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
