Wet Sounds REVO CX-10 XS-W-SS S2 REVO XS Series 10" 350W RMS (700W Peak Power Handling) 2 Ohms, 2-Way Coaxial Marine Speakers with XS-White-Stainless Steel RGB Grilles (Pair)
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 10" REVO XS Series 2-Way Coaxial Marine Speakers
- • (2) Grilles (each has tweeter and multi-color LEDs built-in)
- • (2) Rubber mounting gaskets
- • (2) 8" Waterproof 4-pin female SuperSeal LED (RGB) harnesses
- • (12) 1-1/2" Stainless steel Phillips head screws
- • Owner's Manual
Why Choose Wet Sounds REVO CX-10 XS-W-SS S2 Marine Speakers?
Command the Water 10″ Marine Coaxial Speaker
Experience bold, high-output sound with the largest marine coaxial speaker, featuring a powerful 10-inch mid driver that dominates any open-water environment. With 350W RMS (700W peak) power and a durable Santoprene suspension for smooth, reliable cone movement, it delivers loud, crystal-clear audio built for long-lasting marine-grade performance.
Rugged Performance Meets Custom Style
Built with a heavy-duty injection-molded composite frame and cone, these speakers offer strength, corrosion resistance, and reduced vibration for superior sound quality. Featuring a 1 1/4-inch high-output titanium dome tweeter for crisp, wide-range highs and XS-White Stainless Steel RGB grilles for customizable multi-color lighting with a Wet Sounds RGB Controller (sold separately), they deliver both premium performance and striking style on the water.
Premium Marine Audio with Custom Style
Engineered for harsh marine conditions, these speakers deliver consistent, high-quality sound on boats and offshore vessels. Available in eight grille colors and styles and sold in pairs for full stereo coverage, they combine signature Wet Sounds high-output, long-range performance with customizable style to perfectly match any boat or personal aesthetic.
Frequently Asked Questions (FAQ)
- • Why do these speakers sound like they have weak midbass after installation?
A high-pass crossover set too high can remove much of the midbass. Try a setting around 60–80 Hz and verify the amplifier is properly tuned and operating in stereo mode.
- • Why does the sound distort when I turn the volume up?
Clipping can occur from excessive gain, EQ boost, or insufficient clean amplifier power. Keep the head unit's EQ flat and adjust the amplifier gain gradually.
- • Why do the speakers sound too bright or harsh?
The 1-inch titanium tweeter delivers detailed high frequencies, which can become aggressive with excessive treble or gain. Reduce the treble or adjust the amplifier settings.
- • Why is one speaker quieter than the other?
Check the balance setting, amplifier channels, speaker polarity, wiring, and connectors. Switching amplifier channels can help determine whether the problem follows the speaker or wiring.
- • Why is there no sound even though the amplifier has power?
Inspect the speaker wiring, amplifier output, source selection, and crossover settings. A loose connector or incorrect amplifier configuration can prevent the speakers from receiving a signal.
- • Do I need a separate amplifier for these speakers?
They are rated at 150 watts RMS and 4 ohms. A properly matched amplifier is recommended when you want higher output and cleaner performance than a factory radio can provide.
- • Why are the speakers rattling while the boat is moving?
Loose mounting hardware, clamps, grilles, or wiring can create vibration noises. Check all mounting points and make sure the fixed clamps are securely tightened.
- • Why do I have trouble getting the fixed clamps positioned correctly?
Fixed clamps must match the tower tubing and be aligned securely before tightening. Verify the tower diameter and mounting hardware before final installation.
- • Why did the sound change after I adjusted the amplifier crossover?
Changing the high-pass frequency can significantly affect midbass output. A setting that is too high can make the speakers sound thin, while proper tuning preserves more of their usable low-frequency range.
- • Can prolonged exposure to sun, water, and cleaning chemicals damage the finish?
The enclosure uses UV-resistant materials, but excessive water, heat, harsh chemicals, and abrasive cleaners can still cause cosmetic or performance damage over time.
- Diameter : 10 Inch
- Sensitivity : 90 dB
- Impedance : 2 Ohm
- Frequency Response : 35-22000 Hz
- Peak Power Handling : 350 Watts
- Color : White
- RMS Power Handling : 700 Watts
Features:
- Largest Marine Coaxial Speaker: Built with a powerful 10-inch mid driver to deliver bold, high-output sound that dominates any marine environment.
- High-Power Performance: Handles 350W RMS and 700W peak per speaker, delivering loud, clear audio that performs even in high-speed or open-water conditions.
- Durable Santoprene Suspension: Features a full rubber Santoprene spider and surround for smooth cone movement, long-lasting reliability, and marine-grade performance.
- Heavy-Duty Composite Construction: Injection-molded composite frame and cone provide strength, corrosion resistance, and reduced vibration for superior sound quality.
- High-Output Titanium Dome Tweeter: Equipped with a 1 1/4-inch titanium dome tweeter for crisp highs and wide-range sound projection.
- Custom RGB Lighting: Includes XS-White Stainless Steel RGB grilles for multi-color accent lighting using a Wet Sounds RGB Controller (sold separately).
- Marine-Certified Performance: Engineered to withstand harsh marine conditions, ensuring consistent, premium audio performance on boats and offshore vessels.
- Multiple Style Options: Available in eight different grille colors and styles to match any boat or personal aesthetic.
- Sold in Pairs: Each set includes two speakers for complete stereo coverage.
- Signature Wet Sounds Quality: Delivers high-output, long-range sound that American boaters expect from premium marine audio systems.
Specifications:
- Speaker Size: 10-inch 2-way coaxial
- Grille Style: XS-White Stainless Steel RGB
- RMS Power Handling: 350W per speaker
- Peak Power Handling: 700W per speaker
- Impedance: 2Ω
- Cutout Dimensions: 9.45" x 9.45"
- Mounting Height: 6.7"
- Overall Width: 10.0"
- Overall Length: 10.0"
- Weight: 29.8 lbs per speaker
- Tweeter Size: 1 1/4" Titanium Dome
- Suspension: Full rubber Santoprene spider and surround
- Frame/Cone Material: Heavy-duty injection-molded composite
- RGB Backlighting: Yes (requires Wet Sounds RGB Controller, sold separately)
- UPC: 814820024746
- Weight: 15
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
