This exclusive package is brought to you by Onlinecarstereo. We have put together this bundle to kickstart your vehicle to the path of excellent car audio.
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes.
Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer. Water-resistant PP Cone (IPX5), UV resistant woofer grille and cone
A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's.
Designed for the toughest marine environments, this amplifier features REAL MARINE™ construction, including anti-corrosive terminals, stainless-steel screws, conformal-coated circuit boards, and ABYC/NMMA-compliant power connections for reliable performance in saltwater, UV, and high-humidity conditions. Its high-efficiency Class D design delivers maximum power without overheating, while the adjustable KickEQ™ Bass Boost (0–6 dB at 40 Hz) adds extra punch for a deeper, more impactful low-end.
Featuring a variable 24 dB crossover for precise high-pass, low-pass, or band-pass tuning, this amplifier ensures each speaker performs at its best. The DSP-controlled preamp delivers clear, distortion-free audio across all channels, while the gain control with “Gain Match” LED indicator simplifies setup by visually confirming when the input signal is optimally matched.
This amplifier features a gasket-sealed control panel that safeguards gain, crossover, and bass-boost settings from water, dust, and corrosion while allowing quick adjustments. Full-range RCA outputs simplify system expansion by letting you add additional amplifiers without extra cabling. Built with a black anodized aluminum chassis and a top-mounted teal LED light pipe, it combines durability with style, and included stainless-steel mounting hardware ensures secure, corrosion-resistant installation.
Features:
Specifications:
Features:
Specifications:
This exclusive package is brought to you by Onlinecarstereo. We have put together this bundle to kickstart your vehicle to the path of excellent car audio.
We are an authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
The tweeters are mounted to the grilles, rather than to a pole piece, thus there is no chance of water leaking through the woofer cone.
There are red, green, and blue LED's in the back of each tweeter casing to create a glow on the woofer cones. The LED's are controlled using the included RF remote, choose between 21 different static colors, or 21 different dynamic modes.
Water-resistant rubber cushion adopted to prevent water intrusion of back side of the woofer. Water-resistant PP Cone (IPX5), UV resistant woofer grille and cone
A 12 volt power supply is needed to turn the LED's on and a 3-amp fuse should be wired in-line (fuse not included). One of the speakers has an LED control module attached with an RF remote control receiver, to which the LED power and ground wires are connected. The included Link Cable B is routed to the other speaker to control its LED's.
Designed for the toughest marine environments, this amplifier features REAL MARINE™ construction, including anti-corrosive terminals, stainless-steel screws, conformal-coated circuit boards, and ABYC/NMMA-compliant power connections for reliable performance in saltwater, UV, and high-humidity conditions. Its high-efficiency Class D design delivers maximum power without overheating, while the adjustable KickEQ™ Bass Boost (0–6 dB at 40 Hz) adds extra punch for a deeper, more impactful low-end.
Featuring a variable 24 dB crossover for precise high-pass, low-pass, or band-pass tuning, this amplifier ensures each speaker performs at its best. The DSP-controlled preamp delivers clear, distortion-free audio across all channels, while the gain control with “Gain Match” LED indicator simplifies setup by visually confirming when the input signal is optimally matched.
This amplifier features a gasket-sealed control panel that safeguards gain, crossover, and bass-boost settings from water, dust, and corrosion while allowing quick adjustments. Full-range RCA outputs simplify system expansion by letting you add additional amplifiers without extra cabling. Built with a black anodized aluminum chassis and a top-mounted teal LED light pipe, it combines durability with style, and included stainless-steel mounting hardware ensures secure, corrosion-resistant installation.
