Orion XMT69.2 - XTR Series 6x9" 1600W Peak Power Handling at 2-Ohms, Coaxial Car Speaker with Built-in Neodymium Bullet Tweeter
We are a Orion authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6x9" Midrange Car Speaker with Built-In Neodymium Bullet Tweeter
- • Owner's Manual
Why Choose Orion XMT69.2 Midrange Speaker?
All-Weather Coaxial Midrange
Enjoy dependable, high-quality sound anywhere with this water-resistant coaxial midrange speaker, perfect for cars, boats, motorcycles, ATVs, UTVs, and outdoor powersports. Its moisture-resistant cone and components ensure long-lasting performance even in wet or humid conditions. Designed for versatility, it delivers clear, dynamic audio in every environment.
Crisp Highs, Powerful Output
Experience detailed, high-frequency sound with a built-in neodymium bullet tweeter that delivers crisp, clear highs and excellent projection. With 400W RMS and 1600W peak power handling, this speaker provides strong, distortion-free midrange performance. Perfect for pro audio setups, it combines clarity, power, and reliability in one compact design.
Efficient, High-Power Performance
Get the most out of your system with 2-ohm impedance, designed for maximum amplifier efficiency and consistent output. The 1.5” high-temperature voice coil keeps performance stable even during extended high-volume use. Built for reliability, this speaker delivers powerful, distortion-free audio every time.
Orion XMT69.2 Highlights
HIGH POWER
400W RMS Output
Handles 400 watts RMS and up to 1,600 watts maximum power for loud, powerful midrange performance.
WATER-RESISTANT BUILD
Ready for Outdoor Use
Water-resistant cone and components make the XMT69.2 ideal for boats, UTVs, ATVs, motorcycles, and other outdoor applications.
2-OHM PERFORMANCE
High-Efficiency Output
The 2-ohm impedance helps maximize amplifier power for strong, efficient performance in demanding audio systems.
BUILT-IN TWEETER
Neodymium Bullet Tweeter
The integrated neodymium bullet tweeter produces crisp, detailed highs and strong sound projection without requiring a separate tweeter.
HIGH-TEMP VOICE COIL
1.5-Inch Voice Coil
A 1.5-inch high-temperature voice coil supports reliable power handling and consistent performance during demanding playback.
WIDE FREQUENCY RANGE
75Hz–20kHz Response
The broad frequency response delivers strong midrange presence with detailed highs for a more complete coaxial sound.
RUGGED CONSTRUCTION
Durable Coating & Seals
Protective coatings and seals help resist moisture and corrosion for dependable performance in rugged environments.
Frequently Asked Questions (FAQ)
- • Why does my XMT69.2 sound different from a normal 6×9 factory speaker?
The XMT69.2 is a high-output coaxial midrange with a built-in neodymium bullet tweeter, rather than a typical OEM full-range 6×9. Its 95 dB sensitivity and 75 Hz–20 kHz response can produce a more pronounced, high-output presentation.
- • Why does my XMT69.2 need an amplifier to sound its best?
Although it can receive an audio signal from a head unit, the speaker is rated at 400W RMS per pair of drivers? More precisely, Orion specifies 400W RMS power handling for the XMT69.2 speaker pair/model, so an appropriately matched aftermarket amplifier is useful for reaching its intended output. A verified buyer specifically noted that the sound was good when driven with an amplifier.
- • Why does my amplifier seem to work harder after installing the XMT69.2?
The XMT69.2 uses a 2-ohm impedance, which can draw more current from an amplifier than a typical 4-ohm speaker. Confirm that the amplifier is designed to operate safely at the final impedance before installation.
- • Why don't the XMT69.2 speakers fit exactly into my factory 6×9 openings?
The 6×9 designation does not describe every external dimension. Orion lists an overall size of approximately 245 × 173 mm and a mounting depth of 84.5 mm, so the mounting opening and rear clearance should be measured before replacing factory speakers.
- • Why does the XMT69.2 have less deep bass than I expected?
These are designed as coaxial midrange speakers, not dedicated subwoofers. Their published frequency response begins at 75 Hz, so a subwoofer can be used when deeper low-frequency output is required.
- • Why do the highs sound stronger after installing the XMT69.2?
The XMT69.2 incorporates a neodymium bullet tweeter, which handles the upper frequencies and provides additional projection. If the highs seem excessive, check the amplifier's EQ and crossover settings rather than immediately assuming the speaker is defective.
- • Can the XMT69.2 handle outdoor or powersports exposure?
Yes. Orion describes the speaker as water-resistant and lists applications including boats, jet skis, motorcycles, ATVs, UTVs, and other outdoor systems. Water-resistant construction should still not be interpreted as protection against continuous submersion.
- • Why does my XMT69.2 distort when I turn the volume up?
Check the amplifier's gain, speaker impedance, wiring, and crossover settings. Orion specifies a 2-ohm load and 400W RMS handling, while excessive amplifier clipping or an unsuitable load can cause distortion even when the speaker itself is functioning normally.
- • Why am I hearing vibration around the speaker after installation?
A loose mounting surface, adapter, grille, or speaker hardware can create unwanted vibration. Orion's troubleshooting guidance for its audio products recommends checking that speakers are securely mounted and that surrounding installation components are not creating rattling noises.
- • Are the XMT69.2 speakers actually easy to install?
One verified eBay buyer specifically rated the XMT69.2 as easy to install, while another reported good frequency response, power handling, construction, and acceptable sound when amplified. Actual installation difficulty will depend on the vehicle's factory opening and available mounting depth.
- Diameter : 6x9 Inch
- Sensitivity : 95 dB
- Impedance : 2 Ohm
- Frequency Response : 75-20000 Hz
- Peak Power Handling : 1600 Watts
- RMS Power Handling : 400 Watts
Features:
- Water-Resistant Coaxial Midrange: Engineered with a moisture-resistant cone and components, ideal for cars, boats, jet skis, motorcycles, ATVs, UTVs, and outdoor powersports systems.
- Built-In Neodymium Bullet Tweeter: Delivers crisp, detailed highs and excellent sound projection without requiring separate tweeters.
- High Power Handling: Provides 400W RMS and 1600W Max Power for strong, clear midrange output suitable for pro audio builds.
- 2-Ohm Impedance & 1.5” High-Temperature Voice Coil: Ensures maximum amplifier efficiency and powerful, reliable audio reproduction.
Specifications:
- Speaker Type: 6x9” Coaxial Midrange
- Power Handling: 400 RMS / 1600W Max
- Impedance: 2 Ohms
- Voice Coil: 1.5” High-Temperature
- Tweeter: Built-in Neodymium Bullet Tweeter
- Frequency Response: 75 Hz – 20 kHz
- Sensitivity: 95 dB
- Features: Water-Resistant Cone and Components
- Mounting Depth: 84.5mm
- Overall Depth: 99.6mm
- Overall Diameter: 245x173mm
- UPC: 818550010109/7999169
- Weight: 5.2
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.