Rockford Fosgate P152-S Punch Components Series 5.25" 50W RMS (100W Peak Power Handling) 2-way Car Speakers System
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Woofers (each woofer has a dual tweeter mounting post with two tweeters installed and each tweeter has a surface-mount/wedge-mount top housing that holds the tweeter in place)
- • (2) Grilles (each has an attached dual tweeter trim ring)
- • (2) Crossovers
- • (2) Single tweeter mounting posts
- • (2) Phase plugs
- • (4) Flush-mount top housings
- • (4) Flush-mount/surface-mount bottom housings
- • (4) Wedge-mount bottom housings
- • (4) Flush-mount clips
- • (4) 12' lengths of speaker wire (each length has tinned wire on both ends)
- • (6) 1-5/8" Allen-head self-tapping screws
- • (8) 1-1/4" Allen-head self-tapping screws
- • (8) 1-1/4" Phillips-head self-tapping screws
- • (8) 3/4" Phillips-head self-tapping screws
- • (4) Threaded tweeter mounting posts
- • (4) Hex nuts
- • (16) Speed clips
- • (1) 3mm Allen bit
- • (2) Self-adhesive logo badges
- • Installation & Operation manual
- • Owner's Manual
Why Choose Rockford Fosgate P152-S Component System?
Components system
If you really dig the highs in your music, you'll like the Rockford Fosgate Punch P152S component system — it gives you a double shot by including two tweeters with each 5-1/4" woofer. You can leave them in place over the woofer cone, or mount them separately with the included surface- or wedge-mounts. This versatility allows you to achieve maximum performance and dispersion of the highs from the 3/4" aluminum dome tweeters.
Smooth Excursion to the subwoofers
Expect strong lows from the tough-as-nails mica-injected poly 5-1/4" woofers. The sturdy stamped-steel baskets and polyurethane surrounds help control vibrations and provide smooth excursion so the woofers can keep the low tones rolling. If you're doing a custom install, the sharp-looking metal-toned grilles will give your ride a distinctive look. The outboard 2-way crossovers feature protection circuitry that guards your tweeters against power surges.
Frequently Asked Questions (FAQ)
- • Why do the tweeters sound too bright?
The dual-tweeter layout can produce strong highs in some vehicles. Adjust the crossover, EQ, and tweeter aiming to achieve a smoother sound.
- • Why isn't the midbass as strong as expected?
Door sealing and mounting have a major effect on midbass. Seal the speaker properly and use sound-deadening material to reduce unwanted vibration.
- • Do I need an amplifier for these speakers?
They can run from a head unit, but an amplifier provides more clean headroom. Properly matched amplification can improve volume and overall dynamics.
- • Why does the sound become harsh at higher volume?
Excessive gain, clipping, or aggressive EQ settings can make the highs harsh. Lower the gain and reduce treble if necessary for cleaner playback.
- • Why isn't one of the tweeters working?
Check the tweeter wiring, mounting posts, crossover connections, and terminals. A loose connection can cause one driver to stop playing properly.
- • Can I use only one tweeter on each side?
The system is designed around its dual-tweeter configuration. Changing the number of tweeters can alter the intended impedance, output, and crossover response.
- • Why does the sound change when I move the tweeters?
Tweeter positioning significantly affects imaging and high-frequency response. Aim them toward the listening area and compare different mounting angles.
- • Why does the system sound thin after installation?
Incorrect polarity, poor door sealing, weak amplification, or missing sub-bass can make the system sound thin. Check wiring and speaker mounting first.
- • Why do I hear distortion at high volume?
Clipping or excessive amplifier gain can cause distortion. Reduce the gain, avoid heavy bass boost, and use an appropriate high-pass filter.
- • What should I check if one side sounds different?
Check speaker polarity, crossover wiring, tweeter connections, and amplifier channels. Swapping channels can help isolate a wiring or component problem.
- Diameter : 5.25 Inch
- Sensitivity : 87 dB
- Frequency Response : 70-2200 Hz
- Peak Power Handling : 100 Watts
- RMS Power Handling : 50 Watts
Features:
- Butyl Rubber Surround
- FlexFit basket design
- ICC (Integrated Concealed Crossover)
- OEM adapter plate included
- PEI dome tweeter
- Recessed tweeter mount uses standard 1-3/4" hole saw
Specifications:
- Configuration: 2-Way Component System
- Midrange Diameter: 5.25" (133.35mm)
- Midrange Depth: 1.87" (47.50mm)
- Tweeter Diameter: 1.0" (25mm)
- Tweeter Depth: 0.50" (12.70mm)
- Frequency Response: 70Hz - 22kHz
- Crossover: High-Pass (HP): 3.5KHz @ 12dB/octave Butterworth
- Low-Pass (LP): midrange has natural acoustic 12dB/octave roll-off
- Sensitivity: 87dB @ 1 watt/1 meter
- Grilles Included: Yes
- Mounting Hardware: Yes
- Power Handling
- 100 Watts Max
- 50 Watts RMS
- UPC: 780687329075
- Weight: 5
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
