Rockford Fosgate T2T-S Power T2 Components Series 1" 75W RMS (150W Peak Power Handling) 4 Ohms Aluminum Tweeter Kit
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Tweeters (with attached 6" speaker wire terminated with female quick-slide connectors)
- • (2) Crossovers
- • (2) Front flush mount tweeter brackets
- • (2) Rear flush mount tweeter brackets
- • (2) Surface mount tweeter housings
- • (4) Tweeter trim rings (2 Polished aluminum/2 Brushed aluminum)
- • (2) M4x25mm Machine screws
- • (2) M4x10mm Machine screws
- • (2) M4x15mm Stud bolts
- • (2) 40" Crossover input wires (female quick-slide connectors on one end and bare wire on the other)
- • (2) 40" Crossover output wires (female quick-slide connectors on one end and male quick-slide connectors on the other)
- • (4) 7" Zip-ties
- • Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)
- • Owner's Manual
Why Choose Rockford Fosgate T2T-S Car Tweeters?
High-Detail Highs That Hit Different
If your system feels like it’s missing that crisp top-end detail, the Rockford Fosgate T2T-S Aluminum Tweeter Kit brings everything into focus. The 1-inch aluminum dome design delivers sharp, accurate highs with strong projection, giving your music more space, clarity, and energy. Whether you’re listening at low volume or pushing it hard, these tweeters stay clean and controlled so vocals, cymbals, and instruments cut through without sounding harsh.
Flexible Install with Tuned Sound Control
The T2T-S is built for real-world installs where fitment and tuning matter just as much as performance. You get flush mounting using the Discreet Dual Clamp system for a tight, factory-style finish, or surface mounting with 15-degree or 30-degree angle options to aim the sound exactly where you want it. With a 3000 Hz crossover point and selectable output levels of 0 dB, -2 dB, and -4 dB, you can fine-tune brightness and balance so it blends perfectly with the rest of your system.
Frequently Asked Questions (FAQ)
- • Why is there no sound from the tweeters?
Check the speaker wiring, crossover connections, and amplifier output. Loose wires or incorrect connections can prevent the tweeters from producing sound properly.
- • Why do the highs sound too harsh?
Lower the tweeter level if your crossover provides adjustment. Excessive gain or strong equalizer settings can also make high frequencies sound harsh.
- • Why is one tweeter louder than the other?
Check the balance, wiring, crossover, and amplifier channels. Swap the tweeter connections to determine whether the issue follows the speaker or channel.
- • Why do the tweeters sound distorted?
Distortion can result from excessive amplifier gain or clipping. Lower the gain and check the crossover settings to protect the tweeters from harsh signals.
- • Can these be connected directly to an amplifier?
Use the recommended crossover or included filtering components when required. Tweeters need proper high-pass protection to prevent damaging low-frequency signals.
- • Why do I hear a buzzing sound from them?
Buzzing may come from loose mounting, damaged wiring, or electrical interference. Inspect the connections and mounting area for possible sources.
- • Why are the highs barely noticeable?
Check the crossover frequency, tweeter polarity, amplifier gain, and audio settings. Incorrect phase or filtering can reduce the high-frequency output.
- • Why does the sound change after mounting them?
Tweeter positioning affects how high frequencies are directed into the cabin. Try adjusting the mounting angle for better sound coverage and imaging.
- • Can they be installed in the factory speaker location?
Installation depends on the available mounting space and vehicle. Check the tweeter dimensions and use the appropriate mounting hardware for a secure fit.
- • What should I check if a tweeter suddenly stops working?
Check the wiring, crossover, amplifier channel, and fuse if applicable. Test the connections and inspect for damaged wires before replacing the tweeter.
- Diameter : 1 Inch
- Sensitivity : 90 dB
- Frequency Response : 3000-22000 Hz
- Peak Power Handling : 150 Watts
- RMS Power Handling : 75 Watts
Features:
- High-Output Aluminum Dome Tweeter Performance: The Rockford Fosgate T2T-S 4 Ohms Aluminum Tweeter Kit delivers precise and powerful high-frequency response using 1-inch aluminum dome tweeters designed for improved detail, accuracy, and dynamic sound reproduction in demanding car audio systems.
- CEA-2031 Rated Power Handling Reliability: Built to meet CEA-2031 compliance standards, the tweeters are engineered to sustain their rated power output under continuous load, ensuring consistent performance and long-term durability even at high listening levels.
- Flexible Flush and Surface Mount Options: Designed for versatile installation, the system supports flush mounting with a Discreet Dual Clamp system for secure perimeter pressure, along with surface mounting options that provide adjustable 15-degree or 30-degree angling for optimized sound direction.
- Advanced 18dB Passive Crossover Control: Equipped with high-performance crossovers set at 3000 Hz, the system ensures clean frequency separation with selectable attenuation levels of 0 dB, -2 dB, and -4 dB, plus configurable output terminals for precise on-axis or off-axis sound tuning.
Specifications:
- Grille/Trim Ring Included: Yes
- 75 Watts RMS
- 150 Watts Max
- High-Pass (HP): 3.0kHz @ 18dB/octave
- Butterworth
- Flush Mount: 0.91” (23 mm)
- Surface Mount: 1.06" (27 mm)
- Shipping Weight: 1.653 Lbs. (0.74 kg.)
- Speaker Type: Tweeter
- CEA-2031 Compliant: CEA-2031 Guidelines
- Nominal Impedance (Ohms): 4-Ohms
- Mounting Hardware: Yes
- Tweeter Size (Nominal Diameter): 1.0" (25.4 mm)
- Frequency Response (Hz): 3kHz - 22kHz
- Sensitivity (dB @ 1W/1M): 90
- UPC: 780687329242
- Weight: 2
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
First time buying a component system to replace my Camry’s setup. Feels like a great deal with this RF product. Everything is good with the T2T-S and I’m loving how it sounds. Got it installed with a professional and it also didn’t take up much time to finish the job
