Wet Sounds SYN-DX-4 SYN-DX Series 4-Channel 200W RMS x 4 at 2 Ohms, Full Range Class-D Marine Amplifier
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • SYN-DX Series 4-Channel Full Range Class-D Marine Amplifier
- • (2) 30A ATO fuses (installed)
- • Wet Sounds badge
- • Owner's Manual
Why Choose Wet Sounds SYN-DX4 Marine Amplifier?
Complete Solution
The Wet Sounds SYN-DX-4 marine amplifier is a versatile, high-performance marine amplifier designed to deliver great audio quality and power in a marine setting. This amplifier, designed to resist the rigors of boating, offers dependable and outstanding sound output on your boat or watercraft.
Thermal Overload Protection
These amplifiers have extreme power output packed inside a small chassis, thermal overload protection, flexible crossovers, and extended inputs. SYN-DX amplifiers are a well-balanced match for all of the Wet Sounds™ products. The SYN-DX-4 provides powerful and clean music playback with a maximum power output of 800 watts.
It has a Class D amplifier design that provides excellent efficiency and low power consumption, making it ideal for naval electrical systems. The SYN-DX-4 has four channels that can be used to power multiple speakers or bridged to drive subwoofers.
Packed With Premium Features
It has gain settings that let you to fine-tune the audio output based on your tastes and speaker requirements. This marine amplifier is made of marine-grade materials and has conformal-coated circuit boards for protection against moisture, salt, and UV rays.
Its tough design provides longevity and dependability in the harsh sea environment. Furthermore, the SYN-DX-4 includes advanced protective features such as temperature protection, overload protection, and short circuit protection, guaranteeing that the amplifier stays safe and operational even in adverse conditions.
Frequently Asked Questions (FAQ)
- • Why isn't the amplifier turning on?
Check the main fuse, battery connection, ground, and remote turn-on wire. Make sure all power connections are tight and properly sized.
- • Why does it shut off when I increase the volume?
Check for voltage drop, insufficient power supply, overheating, or an impedance load below the amplifier's supported range.
- • Why does the amplifier go into protection mode?
Inspect the speaker wiring for shorts, verify the final impedance, and check for excessive heat. Disconnect the speakers temporarily to help isolate the issue.
- • Why is one channel not producing sound?
Check the RCA or source connection, speaker wiring, gain settings, and channel controls. Swap the source or speaker connection to identify where the problem occurs.
- • Why does the audio sound distorted?
Reduce the gain and bass boost, then check the source signal for clipping. Excessive input levels can cause distortion even when the speakers are properly rated.
- • Why is there a whining noise through the speakers?
Check the amplifier ground and RCA signal cables. Keep signal wiring away from power cables and make sure the ground connection is clean and secure.
- • Why does the amplifier get extremely hot?
Ensure adequate ventilation and check the speaker impedance. Continuous operation at high levels or an improper load can increase operating temperature.
- • Can it power multiple marine speakers?
Yes, provided the total speaker load and power requirements stay within the amplifier's specifications. Verify the impedance before connecting multiple speakers to a channel.
- • Why does the sound level seem lower than expected?
Check the input sensitivity, gain, source output, speaker impedance, and wiring. Incorrect gain settings can significantly reduce usable output.
- • Is it safe to install in a boat exposed to moisture?
It is designed for marine audio systems, but proper mounting and protection are still important. Install it in a suitable location away from direct water exposure.
- Low Frequency Response : 50-250 Hz
- High Frequency Response : 50-250 Hz
- Number of Channels : 4
- Frequency Response : 20-20000 Hz
- Built In Crossovers : Yes
- RMS Power Output : 4x200 Watts
- Channel Separation : Yes
- Color : Black
- Amplifier Class : D
- Promo : Yes
Features:
- Superior Performance Circuitry: Equipped with class-D power supplies.
- Extreme Power Output: Packed inside a small chassis for maximum efficiency.
- Thermal Overload Protection: Ensures safety and longevity of the amplifier.
- Flexible Crossovers: Allows for versatile audio configurations.
- Extended Inputs: Provides enhanced connectivity options.
- Perfect Match: Well balanced to complement all Wet Sounds products.
- Advanced Smart Microprocessor: Ensures reliable power and great control.
- Conformal Coated PCB Board: Offers durability and protection.
Specifications:
- Stereo @ 4 Ohms: 125 x 4 watts RMS >1.0% THD
- Stereo @ 2 Ohms: 200 x 4 watts RMS >1.0% THD
- Mono @ 4 Ohms: 400 x 2 watts RMS >1.0% THD
- ChannelsInput Sensitivity: 0.2 V - 6.0 V
- Crossover Range High Pass: 50 Hz - 250 KHz 12dB/Octave
- Crossover Range Low Pass: 50 Hz - 250 KHz 12dB/Octave
- Channels: 4
- Series: SYN-DX
- Frequency Response: 20 Hz - 20 KHz
- UPC: 814820022537
- Weight: 8
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.