Kicker 46CSS694 CS Series 6"x9" 150W RMS (450W Peak Power Handling) 4 Ohms, 2-way Car Component Speaker System
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Woofers
- • (2) Woofer grilles
- • (2) Tweeters (each with 36" Wire attached)
- • (2) Crossovers with 35" input, tweeter, and woofer wires attached
- • (2) Flush Mount Tweeter Rings
- • (2) Short Tweeter Mounting Nuts
- • (2) Long Tweeter Mounting Nuts
- • (2) Back Angled Tweeter Rings
- • (2) Front Angled Tweeter Rings
- • (2) Angled Surface Mount Tweeter Housings
- • (12) 1" Screws
- • (4) 5/8" Screws
- • (8) Speed Clips
- • (4) 7" Zip-ties
- • (4) Red Plastic Wire Caps
- • Owner's Manual
Why Choose Kicker 46CSS694 Component System?
CS Speakers
A car component system that delivers high-quality audio without you needing to break the bank, the Kicker 46CSS694 is designed for all car audiophiles who are on a tight budget but still prefer to have better audio performance than your typical stock car audio speakers. With two 6x9-inch woofers, two tweeters, and a pair of external crossovers, the Kicker 46CSS694 is ready to give you the full-range frequency performance you deserve.
Components
The Kicker 46CSS694 comes with a polypropylene cone and a polyester foam surround, giving its durability even in the harshest conditions. Thanks to the phase plug in its cones, the Kicker 46CSS694 can give you a heart-pounding but accurate bass production with minimal distortion, even if it is used for extended periods at high volume levels.
Remarkable Performance and Ultra-clean Bass
It has a pair of 0.75-inch titanium tweeters with a dome design to give you high frequencies that perfectly match the woofer's bass and mid-frequency output. The Kicker 46CSS694 also uses neodymium magnets to crank up your audio source's volume with a minimal breakup. It also has a pair of crossovers with a three-level tweeter setting for a more defined audio quality production.
Great Sound with Hassle-free Installation
The Kicker 46CSS694 can deliver a continuous power output of 150 Watts and up to 450 Watts of peak power at 4 ohms. It also has a frequency response of 30 Hz to 21 kHz and a sensitivity of 90 dB, which means that it can deliver an extensive full-range performance while going loud with minimal distortion.
Frequently Asked Questions (FAQ)
- • Why do my new component speakers have very little bass after installation?
Weak midbass is usually caused by poor door sealing or reversed speaker polarity. Ensure the woofers are securely mounted and that all wiring connections are correctly phased.
- • Can I choose between flush-mount and surface-mount installation for the tweeters?
Yes. The package includes flush-mount rings, angled rings, mounting nuts, and surface-mount housings to accommodate different installation locations.
- • Why are my tweeters much louder than the woofers?
This is often caused by tweeter placement, excessive treble EQ, or improper crossover installation. Reducing the treble settings and confirming the crossover wiring can improve tonal balance.
- • Do I need to install the included passive crossovers?
Yes. The crossovers divide the audio frequencies correctly between the woofers and tweeters while helping protect each speaker from frequencies it was not designed to reproduce.
- • Why do my speakers distort only when I turn the volume up?
Amplifier clipping or excessive bass being sent to the speakers is the most common cause. Setting a proper high-pass filter and correctly adjusting amplifier gain will reduce distortion.
- • Can I power this component system with my factory stereo?
Yes. It will operate with many factory head units, but an aftermarket amplifier will provide greater output and improved sound clarity.
- • Why does one speaker stop working intermittently while driving?
Loose wiring, damaged connectors, or an improperly secured crossover are common causes. Inspect every connection and secure the crossover to prevent vibration-related issues.
- • Are the included woofer grilles required for installation?
No. They are optional but highly recommended for custom installations where the speakers are exposed to accidental contact or debris.
- • Why does my music sound like the vocals are coming from the doors instead of the dashboard?
Tweeter positioning has a significant effect on soundstage and imaging. Installing the tweeters higher on the doors or A-pillars can improve front-stage performance.
- • Does this package include the mounting hardware needed for installation?
Yes. The package includes woofers, tweeters, passive crossovers, multiple tweeter mounting options, woofer grilles, screws, speed clips, zip ties, wire caps, and an owner's manual.
- Diameter : 6x9 Inch
- Sensitivity : 90 dB
- Frequency Response : 30-21000 Hz
- Peak Power Handling : 450 Watts
- Woofer Composition : Polypropylene
- Tweeter Composition : Titanium
- Shallow Mount : No Inch
- RMS Power Handling : 150 Watts
Features:
- Fits nearly every car made
- 12dB crossovers with a smaller footprint for easier installation
- Three-position tweeter switch for dialing in your highs
- EVC™ (Extended Voice Coil) technology help deliver remarkable bass response
- Titanium tweeter construction and neodymium magnets to reveal subtle details
- UV-treated poly-foam surround assists with precise linear excursion
- Phase plugs in the woofer cones eliminate any distortion
- Steel mesh grilles protect your drivers
- Three tweeter mounting options including flush, angled and surface pods
Specifications:
- Woofer Size | in [mm]: 6x9 [160x230]
- Tweeter Size | in [mm]: 3/4 [20]
- Dome Material: Titanium
- Impedance: 4 Ohms
- Peak Power | [watts]: 450
- Continuous Power | [watts RMS]: 150
- Effective Frequency Range | Hz: 30-21k
- Woofer Mounting Hole Diameter | in [mm]: 5 5/8 x 8 7/16 [143x215]
- Woofer Bottom Mount Depth | in [mm]: 3 3/16 [81]
- Flush Mounting Tweeter Hole Diameter | in [mm]: 1 9/16 [40]
- Flush Mount Tweeter Depth | in [mm]: 9/16 [14.5]
- High Pass | dB, at Frequency | Hz: 12, 4000
- Low Pass | dB, at Frequency | Hz: 12, 4000
- High Frequency Output Attenuation | dB: 0, 3, & 6
- Bolt-Thru Grilles: Yes
- UPC: 713034088431
- Weight: 6.4
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
Speakers sound awesome, super easy to install. Clear sound with deep bass. Exactly what I wanted. Currently connected to my headunit, and they still sound excellent. Planning to add an amp for even better performance. Mids and highs are fantastic, and the bass is clean so you might not need a sub right away.
-
Had it connected to my truck’s head unit and its sounding nice. Decent lows from the woofers and tweeters are bright. Crossovers was easy to install too.
-
Replaced all my speakers in my new Tacoma as I’m not liking what I hear from the stock components. Went with these Kicker system and since it was installed for a month now, I am really happy with what I hear from it. Great full range sound and its much cheaper than the other systems from the other top brands
-
These sound amazing and are extremely easy to install. Clear highs, deep bass, and even better with an amp added. Couldn’t be happier.