Pioneer TS-ME100WC ME Series 10" 900W Peak Power Handling at 4 Ohms, Marine Component Subwoofer with Classic Grille Design
We are a Pioneer authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" Marine subwoofer
- • White grille (installed)
- • (6) 1-3/8" Philips-head stainless-steel screws
- • (6) Stainless-steel flat washers
- • Warranty information
- • Owner's Manual
Why Choose Pioneer TS-ME100WC Marine Subwoofer?
ME-Series Speakers
Pioneer ME-series subwoofers are protected from the effects of sun and water exposure, meeting both IPX7 and ASTM D4329 ratings to achieve all-weather reliability. Mica Reinforced IMPP monocoque cone with butyl rubber surround, constructed using an advanced in-mold bonding technique for superior water resistance while maintaining high-quality, powerful sound.
Integrates into Marine Interiors
The symmetrical motor design with high-strength suspension is optimized to provide stability, linearity and clear, low distortion sound reproduction. Lightweight polymide (PI) tweeter diaphragm and uniquely shaped wave guide provides natural and clear vocals with wide dispersion. The TS-ME100WC comes in a classic, contemporary grille that cosmetically integrates seamlessly into marine interiors and cabin designs.
Frequently Asked Questions (FAQ)
- • Why won't the marine subwoofer produce any bass after installation?
Check that the amplifier is receiving power and that the speaker wiring is connected correctly. Also verify the low-pass crossover and gain settings are properly adjusted.
- • Can this withstand saltwater and harsh marine conditions?
Yes. It is designed with marine-grade materials to resist moisture, UV exposure, and corrosion, but rinsing it with fresh water after saltwater use will help extend its lifespan.
- • Why does the bass sound weak when I'm cruising at higher speeds?
Wind, engine noise, and the open-air environment naturally reduce low-frequency impact. Adding amplifier power and properly tuning the system can improve bass performance while underway.
- • Will this fit the existing subwoofer cutout on my boat?
Fitment depends on the mounting hole diameter and available mounting depth. Measure your existing opening carefully before installation.
- • Why does it make a rattling noise at high volume?
Loose mounting hardware, nearby panels, or an improperly secured enclosure can create unwanted vibrations. Tighten the installation and inspect surrounding components for movement.
- • Can I use this with my existing marine amplifier?
Yes, provided the amplifier's RMS power output and impedance match the subwoofer's specifications. Using a properly matched amplifier ensures reliable performance and cleaner bass.
- • Why does the amplifier go into protection mode after connecting the subwoofer?
This can happen because of incorrect impedance, wiring mistakes, or overheating. Verify the wiring configuration and ensure the amplifier is operating within its rated limits.
- • Why do I hear engine noise through the subwoofer?
Electrical interference is commonly caused by poor grounding or improperly routed signal cables. Inspect the grounding point and separate RCA cables from power wiring whenever possible.
- • Can this be installed in a wake boat or pontoon?
Yes. It is suitable for a variety of marine applications as long as the mounting location meets the required dimensions and installation guidelines.
- • How can I get cleaner, deeper bass without overpowering the rest of my speakers?
Adjust the amplifier gain, crossover frequency, and bass level so the subwoofer blends naturally with your marine speakers. Proper tuning produces balanced, impactful bass without overwhelming the overall sound.
- Diameter : 10 Inch
- Sensitivity : 84 dB
- Impedance : 4 Ohm
- Frequency Response : 20-3500 Hz
- RMS Power Range : 300 Watts
- Peak Power Handling : 900 Watts
- Color : Black
- Mounting Depth : 5 Inches
Specifications:
- Size: 10"
- Design: 10" Component Subwoofer
- Woofer Composition: Injected Molded Polypropylene™
- Woofer Surround: Trex Plane
- Woofer Magnet Composition: Ferrite
- Warranty (must be purchased from an Authorized Pioneer Dealer): 1 Year
- Water Resistant: IPX7
- UV Resistant: ASTM D4329
- Grille Style: Classic White Grille
- Max. Music Power: 900 Watts PEAK
- Nominal Power: 300W RMS
- Frequency Response: 20 Hz to 3.5 kHz
- Sensitivity (1W/1 m): 84 dB
- Impedance: 4 Ohms
- Mounting Depth: 5" (126mm)
- Cut-Out Dimensions: 8-7/8" Dia. (225mm)
- Free Air Operation: Yes
- UPC: 884938429634
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
just recently bought one from the website and immediately installed it my boat. nice sub. strong bass. i like it better than before.
-
it's not that bad but surely there are better subs for the price
-
Nothing too surprising but a good sub to have. My budget is limited so I don't really have too many options
