Kicker 47KSC3504 KS Series 3.5" 50W RMS (100W Peak Power Handling) 4 Ohms, 2-way Coaxial Speakers
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 3.5" KS Series 2-way Coaxial Speakers
- • (2) Adapter brackets
- • (2) in-line crossovers with 11" Lengths of speaker wire attached
- • (4) Red plastic wire caps
- • (8) 1-1/8" Screws
- • (8) Speed clips
- • Owner's Manual
Why Choose Kicker 47KSC3504 Full Range Car Speakers?
Compact and Easy to Install
Compact and easy to install inside your vehicles, the Kicker 47KSC3504 can still give you an audiophile-grade sound and a loud volume output at a very affordable price for an upgrade option for your stock speakers. If you are tired of listening to your current setup, these two-way car speakers are a sure improvement from your old speakers.
3.5" -Way Car Speaker
This 3.5-inch two-way speaker comes with a polypropylene cone and a rubber surround, which helps the Kicker 47KSC3504 deliver an accurate midrange and midbass-frequency performance with reduced noise. The materials also allow the woofer to withstand the stress that comes from continuous usage at very long hours.
0.5" Silk Dome Tweeter
With its 0.5-inch silk dome tweeters, the Kicker 47KSC3504 gets you a clear and bright high-frequency performance, which is a perfect match to what your woofer can offer. Thanks to its thin-mount design, it can easily fit behind your car's factory speaker grilles.
Frequently Asked Questions (FAQ)
- • How do I know if my speakers are wired "out of phase"?
If the sound feels "thin," "hollow," or lacks bass, the speakers might be wired out of phase (positive and negative terminals reversed).
- • Can I install these speakers in my dashboard?
Yes, if your vehicle uses the same speaker size and has adequate mounting depth. Always verify fitment before installation.
- • Are these speakers difficult to install?
Most users find them very easy to install, especially when using vehicle-specific wiring harnesses that eliminate the need to cut or modify factory wires.
- • Do I need special wiring adapters?
Some vehicles require speaker wiring adapters to connect without cutting the factory harness. Check your vehicle's compatibility before starting the installation.
- • Why is one speaker louder than the other?
This may be caused by incorrect balance settings, loose wiring, or a poor electrical connection. Verify the stereo settings and inspect the wiring on both sides.
- • Can I use these speakers with an aftermarket amplifier?
Yes. A properly matched amplifier provides cleaner power, greater dynamic range, and improved overall performance.
- • Why do my speakers buzz when the bass hits?
Buzzing is usually caused by loose mounting screws, vibrating trim panels, or wiring touching the speaker frame. Inspect the installation and tighten any loose components.
- • Should I replace all of my factory speakers at once?
It's not required, but replacing all speakers creates a more balanced sound throughout the vehicle. Many users start with the front speakers and upgrade the rear later.
- • Why do the speakers stop working after the stereo gets hot?
An overheating head unit or amplifier may temporarily reduce or stop audio output. Make sure your equipment has proper ventilation and inspect the wiring if the issue continues.
- • Can I add a subwoofer to improve bass later?
Yes. A dedicated subwoofer handles deep bass more effectively and allows the full-range speakers to play cleaner mids and highs.
- Diameter : 3.5 Inch
- Sensitivity : 88 dB
- Impedance : 4 Ohm
- Frequency Response : 80-20000 Hz
- Peak Power Handling : 100 Watts
- Design : 2 Way
- RMS Power Handling : 50 Watts
Features:
- Potent Performance: Concert-level volume with smooth, detailed highs and precise midrange.
- High Power Handling: Delivers clear sound even with high dynamic ranges.
- Silk-Dome Tweeters: Smooth, natural highs without harshness.
- Polypropylene Woofers with Rubber Surrounds: Durable and precise midbass and low frequencies.
- Thin-Mount Design: Minimal tweeter protrusion (2 mm) fits almost any vehicle.
- Easy Compatibility: Works well with factory radios or aftermarket amplifiers.
Specifications:
- Speaker Design: 2-Way
- Woofer Size: 3-1/2" (89 mm)
- Tweeter Size: 1/2" (13 mm) Silk Dome
- Impedance: 4 Ω
- Recommended Amplifier Power (RMS): 15–50 W
- Peak Power Handling: 100 W
- Sensitivity: 88 dB (1W/1m)
- Frequency Response: 80 Hz – 20 kHz
- Top Mount Depth: 1-11/16" (41.5 mm)
- Bottom Mount Depth: 1-15/16" (49 mm)
- Mounting Hole Diameter: 3-1/16" (78 mm)
- Tweeter Protrusion: 3/16" (4 mm)
- Grilles Included: No
- Tweeter Magnet Material: Neodymium
- Woofer Cone Material: Polypropylene
- Woofer Surround Material: Rubber
- UPC: 713034010456
- Weight: 1.7
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
