facebook no script image
OnlineCarStereo.com is currently under maintenance. Please call 310-526-8635 if youre having problems placing your order.

JL Audio  MV600/6i

MVi Series 6-Channel 100W RMS x 6 at 2 Ohms, Class-D Marine Amplifier with Integrated DSP

Item #76861

Condition:   Brand New

Product Highlights

  • MVi Series 6-Channel Amplifier
  • 100W RMS x 6 at 2 Ohms
  • Class-D Marine Amplifier
  • Integrated DSP

  Free 2-Years Warranty Included!
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

$1,449.99

Reg. Price $1,499.99  Save $50.00
60 DAYS Returns Accepted.
FREE Lifetime Tech Support.
FREE Shipping.
60 DAYS Price change protection.

Out of Stock Check out other products listed below
JL Audio Authorized Dealer

Huge Saving on Other items:



Huge Saving on Other items:


JL Audio Banner for Onlinecarstereo

JL Audio MV600/6i MVi Series 6-Channel 100W RMS x 6 at 2 Ohms, Class-D Marine Amplifier with Integrated DSP


We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!

What's Inside?
  • • MVi Series Class-D Marine Amplifier
  • • MVi amplifier
  • • Power connector
  • • Speaker output harnesses
  • • 6-foot USB A/B cable
  • • RCA Terminal covers (installed)
  • • (4) stainless steel mounting screws
  • • 2.5 mm Allen wrench
  • • 3 mm Allen wrench
  • Owner's Manual

 


Why Choose JL Audio MV600/6i Marine Amplifier?


 

JL Audio MV600/6i Marine Amplifier Top Down View
Durable Marine Amplifier and User-Friendly DSP

Experience exceptional audio performance with our durable marine amplifier, featuring a compact cast alloy chassis, marine-grade powder coat finish, and corrosion-resistant hardware, all enhanced by powerful DSP for precise channel tuning. Enjoy effortless setup and adjustments through our user-friendly TüN™ Software on your PC, tablet, or smartphone!

Elevate Your Sound Experience with Our Versatile Marine Amplifier

Unlock limitless audio possibilities with our versatile marine amplifier, featuring differential-balanced analog inputs (up to 16V RMS) and analog pre-outs with independent DSP processing. Enjoy seamless networking with VXi amplifiers and JLid™ accessories, including Bluetooth® connectivity and customizable DSP presets. Plus, with included accessories like a power connector for 4 AWG wire and multiple speaker output harnesses, setting up your perfect sound system has never been easier!

JL Audio MV600/6i Marine Amplifier Complete Set View
JL Audio MV600/6i Marine Amplifier Rear Angle View
Unlock Superior Sound with NexD2™ Switching Technology

Experience unparalleled audio quality with the JL Audio MV600/6i, featuring our advanced NexD2™ Switching Technology that enhances fidelity and efficiency. This innovative amplifier utilizes cutting-edge components and a unique circuit layout, minimizing distortion and radiated noise for crystal-clear sound. With on-board DSP synchronization, the MV1000/5i delivers precise audio performance, making it the perfect choice for discerning listeners who demand the best in their marine audio experience.


Frequently Asked Questions (FAQ)


  • • Why do only four of my six speakers play after installing the JL Audio MV600/6i?
    Check the DSP input routing and output assignments. Incorrect channel mapping is one of the most common installation mistakes.
  • • Can I connect the MV600/6i directly to my factory stereo?
    Yes. The amplifier accepts both high-level speaker inputs and low-level RCA inputs for flexible installation.
  • • Why won't my computer detect the MV600/6i during DSP programming?
    Ensure the amplifier is powered on, use a compatible USB cable, and install the latest version of JL Audio TüN software.
  • • Can I use this amplifier in a fully active 3-way speaker system?
    Yes. The six amplified channels and integrated DSP make it ideal for active front-stage speaker systems.
  • • Why do my tweeters sound much louder than my midrange speakers?
    The crossover frequencies, output levels, or DSP equalization may need to be adjusted for proper balance.
  • • Why does the amplifier enter protection mode after increasing the volume?
    A shorted speaker wire, low impedance load, overheating, or insufficient supply voltage can trigger protection mode.
  • • Can I save multiple DSP tuning profiles for different music genres?
    Yes. The JL Audio TüN software allows you to save and recall multiple tuning presets.
  • • Why does the soundstage shift toward one side after I adjust time alignment?
    An incorrect delay value or channel assignment can move the perceived center image. Review the DSP settings carefully.
  • • Can I bridge two channels to power a subwoofer while using the remaining channels for speakers?
    Yes. The MV600/6i supports bridged operation when the speaker load meets JL Audio's recommended impedance requirements.
  • • Why is there a short delay before music starts playing after the vehicle is turned on?
    This is normal. The amplifier uses a startup delay to reduce turn-on pops and protect connected speakers.

SPECIFICATIONS


  • Number of Channels : 6
  • Frequency Response : 12-24000 Hz
  • Built In Crossovers : Yes
  • RMS Power Output : 6x100 Watts
  • Amplifier Class : D
  • Fuse Rating : 1x50 A

FEATURES


Features:

  • Power Output: 100 W x 6 @ 2 Ω, 75 W x 6 @ 4 Ω, Bridged mode: Up to 200 W x 3 @ 4 Ω
  • Advanced Technology: Second-generation NexD2™ switching amplifier technology, DSP-controlled for optimized audio performance, reduced loop area design with DirectFET™ outputs
  • Durable Design: Compact cast alloy chassis, marine-grade powder coat finish, corrosion-resistant hardware and connectors
  • User-Friendly DSP: Powerful DSP for channel timing, frequency response, and output level optimization; TüN™ Software for easy setup and adjustments via PC, tablet, or smartphone
  • Input/Output Versatility: Differential-Balanced Analog Inputs (up to 16V RMS), Analog Pre-Outs with independent DSP processing (4V RMS Max)
  • JLid™ System Command and Control: Networking capabilities for VXi amplifiers and optional JLid™ accessories, compatible with VXi-BTC Bluetooth® Communicator, M-DRC-50 for activating up to six DSP presets, MVi-HUB for network connectivity with multiple amplifiers
  • Included Accessories: Power Connector for 4 AWG wire, Speaker Output Harnesses (3), 6 ft A/B USB Cable

 

Specifications:

  • RMS Power Output: 75 W x 6
  • Frequency Response at Rated RMS Power: 12-24 kHz
  • Total Harmonic Distortion (THD) at Rated RMS Power: 1%
  • Signal to Noise Ratio: 99 dB
  • Input Voltage: 14.4 V
  • Peak Power Output: N/A
  • Power at 2 Ohms: 100 W x 6
  • Bridged Power: 200 W x 3
  • Minimum Impedance Bridged: 4 Ω
  • Minimum Impedance Unbridged: 2 Ω
  • Amplifier Class: D
  • Low-Pass Crossover Frequency: Via TüN Software
  • Low-Pass Slope (dB/octave): Via TüN Software
  • High-Pass Crossover Frequency: Via TüN Software
  • High-Pass Slope (dB/octave): Via TüN Software
  • Bass Boost: Via TüN Software
  • Bass Boost Frequency: Via TüN Software
  • Fan Cooled: No
  • Fuse Rating: 50 A
  • Speaker Level Inputs: Yes
  • Preamp Outputs: 6
  • Height: 2-1/8 inches
  • Width: 14 inches
  • Depth: 8-3/8 inches
  • UPC: 699440986489
  • Weight: 5
  • Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.

Do you own this product?

Write a review!

Must haves for JL Audio MV600/6i:

Other items that might interest you:

Other customers also shopped for: