SSV Works US2-C65A-175 A6 6.5" 60W RMS (120W Peak Power Handling) Cage-mount Speaker Pods
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6.5" A6 Cage-mount Speaker
- • Owner's Manual
Tough Pods, Bigger Trail Sound
Turn your Yamaha, Kawasaki, Polaris, or Arctic Cat into a mobile sound machine with rugged 6.5-inch speaker pods. Fiberglass construction, weatherproof speakers, titanium tweeters, and secure stainless hardware deliver reliable audio through demanding off-road conditions. Optional Chroma Grilles let you add your own style.
Built to Mount. Made to Perform.
Get clean, powerful audio without sacrificing your Side-by-Side’s rugged look. The molded fiberglass pods feature 360° 1.75-inch clamps for a secure fit, while 60W peak-rated speakers deliver crisp highs and strong sound. Choose from multiple clamp configurations to match your cage and customize your setup.
Frequently Asked Questions (FAQ)
- • Why does the US2-C65A-175 sound weak after replacing my stock speakers?
The speaker itself may not be the issue. Factory and aftermarket systems can have very different sensitivity and power requirements, so check the amplifier output, gain, and source settings before judging the upgrade.
- • What if the speaker opening is slightly smaller than expected?
Do not force the speaker into an undersized opening. Confirm the required cutout dimensions and available mounting depth, then use an appropriate adapter or mounting solution if the vehicle enclosure requires one.
- • Why do vocals sound recessed compared with the original speakers?
Incorrect equalizer settings or crossover points can remove part of the vocal range. Reset the audio settings to a neutral position and gradually adjust the EQ after confirming the wiring is correct.
- • Can vibration loosen the US2-C65A-175 mounting screws?
Repeated UTV vibration can loosen improperly secured hardware over time. Make sure the speaker is mounted evenly and that the hardware is tightened correctly for the enclosure or mounting surface.
- • Why does the speaker become noisy when accessories are switched on?
Electrical accessories such as lights, winches, or other powered equipment can sometimes introduce noise into an audio system. Check the grounding arrangement and keep audio signal wiring separated from high-current power cables.
- • What should I do if the speaker cone appears damaged?
Stop operating the speaker at high volume and inspect the cone and surround for tears, punctures, or deformation. Physical damage can cause buzzing or distortion and may require replacement rather than an amplifier adjustment.
- • Why does changing the fade setting affect the speaker unexpectedly?
If the vehicle uses an aftermarket amplifier or nonstandard wiring, the factory head unit's channel assignments may not correspond exactly to the speaker locations. Verify the amplifier inputs and outputs before assuming the speaker is wired incorrectly.
- • Can I run the US2-C65A-175 alongside speakers from another brand?
It can be done, but differences in impedance, sensitivity, frequency response, and power handling may create an uneven soundstage. Matching the specifications and tuning the amplifier can help the different speakers blend more naturally.
- • Why does the speaker sound different when the UTV is parked?
The surrounding environment changes dramatically once the vehicle is moving. Engine noise, wind, terrain, and occupant position can mask certain frequencies, making a stationary audio test an unreliable indication of real trail performance.
- • How can I tell if the speaker is receiving enough power?
Check the amplifier's RMS output at the speaker's impedance rather than relying only on its maximum or peak rating. Proper gain adjustment is also important because increasing gain does not necessarily mean the speaker is receiving clean additional power.
Compatible Vehicles:
- Yamaha Rhino Perimeter
- Kawasaki Teryx
- Kawasaki Teryx 4
- Polaris Ranger
- Polaris RZR
- Polaris RZR S
- Polaris XP
- Polaris RZR 4
- Polaris XP 4
- Polaris XP1000
- Arctic Cat Wildcat
- Arctic Cat Wildcat 4
Features:
- Custom Molded Cage Mount Pods
- Includes Dual 360 degree 1.75" Clamps
- 100% Fiberglass
- Black Textured Coat Finish
- Stainless Mounting Hardware Included
- SSV Works Powersports 6.5" Speakers
- Power Handling:
- Peak: 120 watts per pair / 60 watts each
- RMS: 60 watts per pair / 30 watts each
- Polypropylene Cone
- Santoprene Surround
- Weatherproof Design
- 25mm Titanium Tweeter
- 4 ohms impedance
- Cutout Diameter: 5-11/16"
- Max Depth: 2-3/16"
- Custom Color Match your Side-X-Side with Swappable Chroma Grilles, Sold Separately. Available in Orange , Red, Blue and White
- Other Options Available:
- Unloaded with 1.5" Clamps
- Loaded with 1.5" Clamps
- Unloaded with 1.75" Clamps
- Loaded with 1.85" Clamps
- Unloaded with 1.85" Clamps
- Loaded with 2" Clamps
- Unloaded with 2" Clamps
- UPC: 815172013082
- Weight: 9
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
