SSV Works RKR-2K Kicker Marine 4" 65W RMS (195W Peak Power Handling) Speakers for Can-Am Ryker 2 Speaker Audio System with FM Tuner
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Speaker Audio System with FM Tuner
- • Owner's Manual
8-Inch Power Built for the Wild
Bring bigger, louder sound to your UTV with an 8-inch powersports speaker engineered for serious trail conditions. The titanium tweeter delivers sharp, commanding highs, while the weather-sealed enclosure, EPDM gasket, and positive-lock connector help keep performance consistent through mud, water, dust, and extreme temperatures.
Loud Enough for the Open Trail
Designed to compete with engine roar and wind noise, this 8-inch speaker delivers powerful outdoor audio without a bulky footprint. The low-profile cage-mount design and 1.75-inch clamp provide a clean, secure installation, while rugged weather protection keeps your music playing wherever the trail leads.
Frequently Asked Questions (FAQ)
- • Why does the RKR-2K stop responding after installation?
Start by checking the primary power source, ground, fuse, and all required connections. A connector that is only partially seated can make the system appear completely inactive.
- • What causes the RKR-2K to restart while riding?
Unexpected restarts can be caused by unstable power, a loose ground, vibration-related connection problems, or a voltage drop. Inspect the power and ground connections carefully, especially if the issue occurs only on rough trails.
- • Why does the audio suddenly disappear but the system remains powered?
If the unit stays on while audio cuts out, investigate the signal path, amplifier connection, mute settings, and speaker wiring. This can help distinguish an audio-output problem from a complete power failure.
- • Can vibration damage the RKR-2K connections?
Repeated off-road vibration can stress connectors and wiring. Secure the unit properly and provide enough cable support so the connectors are not carrying the weight or movement of the harness.
- • Why does the system produce static when accessories are operating?
Electrical accessories can introduce interference into the audio system if power and signal wiring are poorly routed or grounded. Check the ground points and separate signal cables from high-current accessory wiring.
- • What should I do if the RKR-2K gets unusually hot?
Some heat can be normal during operation, but excessive temperature should not be ignored. Check the installation area for restricted airflow and make sure the system is not being operated under an excessive electrical or speaker load.
- • Why does the unit work normally while parked but fail during hard riding?
This pattern often points toward a mechanical connection problem rather than a software or audio-setting issue. Inspect connectors, mounting hardware, and wiring for movement, tension, or impact-related damage.
- • Can an incorrect wiring configuration cause the RKR-2K to malfunction?
Yes. Incorrect power, ground, signal, or speaker connections can produce anything from poor audio to protection behavior or complete failure. Follow the applicable wiring diagram rather than relying on wire color alone.
- • Why does the audio become distorted when several speakers are connected?
Connecting additional speakers can change the total electrical load and the amount of power available from the amplifier. Verify the combined impedance and make sure the amplifier is capable of handling the configuration.
- • How can I troubleshoot the RKR-2K before replacing it?
Test the system in stages: confirm power and ground, inspect the fuse, verify signal connections, check speaker wiring, and test with a known-good component where possible. Isolating each part can reveal whether the RKR-2K is actually the source of the problem.
Features:
- Ryker-Specific Audio Upgrade: Built specifically for the Can-Am Ryker, this complete package adds powerful entertainment without taking away from the machine’s factory-inspired appearance.
- Bluetooth Music on the Go: The MRB3 media controller lets you wirelessly stream music from your compatible Bluetooth device with easy Play/Pause and Track controls.
- Dual Kicker 4" Speakers: Two weather-ready Kicker 4" 2-way speakers deliver clear, energetic sound designed to stay enjoyable during outdoor riding.
- 20W x 4-Channel Amplifier: The built-in 4-channel amplifier provides 20 watts per channel and supports loads down to 2 ohms, with enough capability to power up to eight 4-ohm speakers.
- Built for Open-Air Riding: The MRB3 controller and speakers use weather-resistant construction to better handle the demanding conditions of outdoor powersports use.
- Factory-Style Installation: The speakers and controller mount to a steel bracket designed around the Ryker's factory mounting points for a clean, integrated appearance.
- Plug-and-Play Harnessing: Pre-terminated wiring makes installation simpler by allowing the system components to connect without complicated custom wiring.
- Glove-Friendly Controller: The wired controller features large rubber-coated buttons and a bright hyper-white LED display for easier operation while riding.
- AM/FM Entertainment: A built-in AM/FM tuner provides an additional listening option when you want to switch away from Bluetooth streaming.
- Convenient USB Charging: The included USB port provides 5V/1A charging for compatible devices, keeping your essential gear powered while you ride.
- Expandable Audio System: The line-out connection can provide a 4-volt RCA signal for adding an external amplifier or powered subwoofer with the appropriate adapter.
- Customizable Sound: Choose from seven EQ presets or manually adjust bass and treble, with additional loudness, balance, and fade controls.
Specifications:
- Brand: SSV Works
- Model: RKR-2K
- Vehicle Application: Can-Am Ryker
- System Type: Complete 2-Speaker Audio Package
- Media Controller: SSV Works MRB3
- Speakers: Two Kicker 4" 2-Way Full-Range Speakers
- Amplifier: Built-In 4-Channel Amplifier
- Amplifier Output: 20W x 4 Channels
- Minimum Amplifier Load: 2 Ohms
- Speaker Capability: Up to eight 4-ohm speakers
- Bluetooth: Built-In Wireless Audio Streaming
- Bluetooth Controls: Play/Pause, Previous/Next Track
- Bluetooth Limitations: No song/artist display or phone-call support
- Radio: Built-In AM/FM Tuner
- Radio Presets: None
- Display: Hyper-White LED Backlit Display
- Controller Cable: 5 ft.
- USB Charging: 5V / 1A
- UPC: 815172017691
- Weight: 9
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
