SSV Works 180-F3-2A A6 6.5" 120W Peak Power Handling Speakers for Spyder F3 2 Marine Speaker System
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6.5" A6 Marine Speaker System
- • Owner's Manual
Spyder F3 Handlebar Audio Upgrade
Bring powerful, convenient sound to your Can-Am Spyder F3 with the SSV Works MRB3 Bluetooth controller and dual 6.5" speaker pods. Stream music wirelessly and control Bluetooth or AM/FM audio right from the handlebar. Weatherproof construction, billet mounts, and factory-inspired styling make this a clean upgrade built for open-road cruising.
Ride Further With Better Sound
Turn your Spyder F3 into a rolling soundtrack with handlebar-mounted MRB3 controls and premium 6.5" speakers. Enjoy crisp highs and punchy mids that stay clear at highway speeds, while rugged weatherproof components handle changing road conditions. The compact pods and billet mounts add serious audio without cluttering the cockpit.
Frequently Asked Questions (FAQ)
- • Why does the system sound different after installing it in a different vehicle position?
Speaker location can change how frequencies reflect around the cabin. Moving the components even slightly may alter the perceived bass, vocals, and overall soundstage.
- • Why does the audio become inconsistent when the vehicle is climbing steep terrain?
Vehicle vibration and movement can expose loose wiring or connectors. Inspect the power, signal, and speaker connections for cables that may be shifting under load.
- • What causes a sudden drop in volume without the system completely shutting off?
The amplifier may be reducing output because of heat, low voltage, or an electrical protection condition. Check system voltage and amplifier temperature when the problem occurs.
- • Why does the system produce a thump when switching the ignition on?
A startup thump can result from the source unit and amplifier powering up at different times. Verify the remote-turn-on wiring and signal connections.
- • Why does the audio sound thin when multiple speakers are playing?
Phase differences between speakers can reduce certain frequencies, particularly bass. Confirm that all speaker connections use consistent polarity.
- • What should I check if the audio cuts out after driving through heavy mud?
Inspect connectors and wiring for mud or moisture contamination. Also check whether the cables have been pulled loose or damaged by debris.
- • Why does a speaker vibrate against the mounting area at higher volume?
A mounting surface that is not completely secure can resonate when exposed to stronger bass. Tighten the hardware and check for gaps or contact between the speaker assembly and surrounding components.
- • Can an incorrect amplifier load cause the system to shut down?
Yes. A speaker load outside the amplifier's supported range can increase heat and trigger protection. Confirm that the connected speakers match the amplifier's impedance requirements.
- • Why does the system sound noticeably different between Bluetooth and wired audio?
Bluetooth and wired sources can have different signal levels and built-in processing. Compare them using the same recording and adjust source volume and EQ before changing the amplifier settings.
- • What is the first thing to check when the entire audio setup suddenly stops responding?
Start with the basic electrical path: battery voltage, main fuse, amplifier power, ground, and remote-turn-on signal. Once power is confirmed, move on to signal and speaker connections.
Features:
- Handlebar-Mounted Audio Control: The rugged SSV Works MRB3 controller puts Bluetooth and AM/FM audio controls right on the Spyder F3 handlebar for easy access while riding.
- Wireless Music Streaming: Connect your phone through Bluetooth, keep it safely in your pocket, and control your favorite music directly from the handlebar.
- Weatherproof Design: Built to handle changing outdoor conditions, the MRB3 lets you enjoy your music whether the ride is sunny, wet, or windy.
- Clean 6.5" Speaker Setup: Dual speaker pods mount beside the gauge cluster to deliver clear, rear-facing sound without creating a bulky cockpit.
- Highway-Ready Audio: The speaker system is designed to maintain crisp, powerful sound even when you're cruising at higher speeds.
- Premium Marine Speakers: SSV Works 6.5" speakers combine a rugged woofer with a grille-mounted 25mm coaxial tweeter for detailed highs and punchy mids and lows.
- Strong Billet Mounting: Billet mounts provide a sturdy foundation while adding a premium look that complements the Spyder F3.
- Factory-Inspired Styling: Textured speaker pods are designed to blend with the matte finish of the Can-Am bodywork for a clean, integrated appearance.
- Kicker Upgrade Available: Upgrade to the Kicker 6.5" speaker option when you want even more performance from your Spyder F3 audio system.
- Built for Open-Road Fun: Bring your favorite soundtrack along for highway cruises and weekend adventures without cluttering your ride.
Specifications:
- System: SSV Works Spyder F3 audio system
- Controller: SSV Works MRB3 Bluetooth audio controller
- Connectivity: Bluetooth wireless streaming
- Radio: AM/FM
- Speaker Size: 6.5"
- Speaker Quantity: 2
- Speaker Type: Marine-grade powersports coaxial
- Power Handling: 60W RMS / 120W peak per speaker
- Impedance: 4 ohms
- Tweeter: 25mm grille-mounted coaxial tweeter
- Mounting: Handlebar-mounted controller with billet clamp and shell
- Speaker Placement: Beside the gauge cluster
- Speaker Finish: Textured coating
- Compatibility: 2016–2018 models only
- UPC: 815172013549
- Weight: 14
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
