SSV Works 180-MT-F65A Kick Pods Loaded with A6 6.5" 120W Peak Power Handling Speakers for Can-Am Maverick Trail-Sport
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Maverick Trail/Sport Kick-Panel Sound Upgrade
Give your Can-Am Maverick Trail/Sport powerful outdoor audio with SSV Works WP-A6 6.5" speakers and custom-molded fiberglass kick panels. The titanium tweeter delivers crisp highs that cut through engine noise, while the sealed EPDM gasket and rugged construction help protect against water, mud, UV, and extreme temperatures. Bolt-in installation keeps the speakers secure and out of the way.
Rugged 6.5" Audio Built for the Trail
Take your Maverick Trail/Sport music to the next level with weather-ready WP-A6 speakers mounted in premium 100% fiberglass kick panels. Enjoy 60W RMS power, bright titanium highs, and reliable 4-ohm performance with a positive-lock connector that stays secure over rough terrain. The factory-style black texture finish adds a clean look while the upper-footwell design preserves cabin space.
Frequently Asked Questions (FAQ)
- • Why does the music sound too quiet once I start driving?
Open-air UTV cabins allow engine and wind noise to overpower music at speed. Check amplifier output and system tuning rather than simply turning the gain all the way up.
- • What causes the speakers to sound thin after installation?
Incorrect polarity between the speakers can cancel portions of the bass. Verify that positive and negative speaker connections are consistent on every channel.
- • Why does the audio crackle when I hit bumps?
A loose connector, terminal, or wire can momentarily lose contact from suspension movement and vibration. Inspect the wiring and secure it away from areas that flex or rub.
- • Can an improperly mounted speaker create a buzzing noise?
Yes. Hardware that is not fully tightened can allow the enclosure or speaker to vibrate against the vehicle, producing a rattle that becomes louder with certain bass frequencies.
- • Why does one speaker sound noticeably different from the other?
Check the fade and balance settings first. If those are correct, compare the wiring and amplifier channels to determine whether the difference follows the speaker or the channel.
- • What should I check if the speakers suddenly stop playing?
Verify amplifier power, the fuse, remote-turn-on signal, speaker connections, and audio-source output. A loose power or ground connection can cause a complete loss of sound.
- • Why does the sound become distorted when I use a lot of bass boost?
Heavy equalizer or bass boosting can push the amplifier into clipping. Reduce the boost and adjust the gain and crossover for a cleaner signal.
- • Can mud and moisture cause problems with the speaker wiring?
Yes. Even with components intended for powersports environments, exposed connectors and wiring can be affected by repeated mud and water exposure. Inspect and secure connections regularly.
- • Why does the system sound different with the vehicle parked versus moving?
Engine RPM, tire noise, wind, and changes in cabin acoustics alter what you hear while driving. Proper speaker placement and amplifier tuning can help maintain a more consistent sound.
- • How do I stop vibration noises around the speaker installation?
Check mounting bolts, brackets, nearby panels, grilles, and wiring for movement. Tightening hardware and preventing components from touching each other can eliminate many trail-related rattles.
Features:
- SSV Works speakers feature a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter how hard you drive, your speakers will keep on rockin’.
- Marine speakers are great for boats; however boat speakers don’t get as wet, dirty or muddy as you do in a Side X Side. WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps.
- Specs: 6.75” Powersports marine speaker with 25mm Titanium hard dome tweeter, Santoprene surround, UV Stable ASA plastic grille with optional Chroma grille color inserts, 2-pin posi-lock connectors, 4ohm, 60w RMS/120w peak power, just 2-3/16” (5.5 cm)
- The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard outdoors, even in a helmet…over the motor…haulin’ down the trails. The grille mounted tweeter allows for peak cone clearance and maximum output while providing a low profile with optimal weatherproofing.
Enclosure:
SSV Works Can-Am Maverick Trail/Sport custom molded kick panels are designed for 6.5" speakers and bolt in the upper foot well away from your feet. They are 100% fiberglass for the best sound quality and bass response. They are finished in a black texture coat to match Can-Am textures and can be custom painted to match your color scheme. - Includes stainless mounting hardware and step-by-step installation instructions.
Speakers:
SSV Works Powersports speakers:(MT-F65A) Get louder, cleaner sound even in the dirt and mud. Engineered specifically for Powersports, the new WP-A6 WeatherProof speaker brings audiophile grade components to the outdoors. The 25mm Ti- tweeter creates crisp brilliant highs engineered to be heard outdoors, even in a helmet…over the motor…haulin’ down the trails. The grille mounted tweeter allows for peak cone travel creating maximum output while providing a low profile with optimal weatherproofing.
Marine speakers are great for boats; however boat speakers don’t get as wet, dirty or muddy as you do in a Side X Side. WP-A6 speakers feature an EPDM duo lock gasket surrounding the speaker to keep the water out and the sound pressure in. EPDM conforms to the surface and seals tight no matter where you ride, in direct UV, extreme heat, or in freezing temps. Reliability meets control with the Santoprene surround; a 30% lighter thermoplastic elastomer surrounding the polypropylene cone for exceptional volume and clarity in the harshest conditions.
The SSV Works WP-A6 speaker features a unique positive lock connector to prevent speaker wire detachment inside the enclosure. No matter how hard you drive, your speakers will keep on rockin’ with 4ohms and 60w RMS/120w peak power.
*Multiple Patents Pending*
Product Dimensions:
- Speaker Size: 6.75"
- Cutout Diameter: 5-11/16"
- Max Depth: 2-3/16"
- Airspace
- Length: 9.5
- Width: 7
- Height: 10.5
- UPC: 815172014065
- Weight: 12
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.