Rockford Fosgate RFPOL-RC5 Polaris® Ride Command® Interface Adapter for STAGE 5 Systems
We are a Rockford Fosgate authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • Polaris Ride Command interface (w/ attached 12" input harness / 5" output harness / 25" power&ground wires and 12" remote wire)
- • Instructions Guide
- • Owner's Manual
Factory Ride Command, Upgraded the Smart Way
The Rockford Fosgate RFPOL-RC5 Interface Adapter is the easiest way to unlock serious audio performance in your Polaris RZR, General, or Ranger without touching the factory Ride Command system. It connects directly to your OEM headunit and keeps everything working exactly as it should, while giving you a clean path to high-output upgrades. Built to pair perfectly with the Rockford Fosgate TM1000X5ad amplifier, it delivers a strong, noise-free preamp signal that gives your system more control, more clarity, and way more headroom when you want to push the volume.
Plug In, Power Up, and Ride Without Limits
Installation stays simple and frustration-free thanks to pre-attached Molex harnesses that plug right in without cutting or splicing anything. Once connected, the interface helps eliminate common Ride Command issues like turn-on pops and unwanted noise from suspension mode changes, keeping your sound clean no matter how rough the trail gets. It also works seamlessly with both 5-button and 7-button Ride Command systems and supports a wide range of Polaris models, making it a flexible upgrade for almost any Ride Command-equipped setup. Factory crossovers stay in play too, helping your speakers and subs stay perfectly balanced while you enjoy a louder, sharper, and more refined off-road audio experience.
Frequently Asked Questions (FAQ)
- • Why am I still hearing a pop when the Ride Command turns on?
The RFPOL-RC5 is specifically designed to eliminate the turn-on pop associated with Polaris Ride Command. If the pop remains, inspect the harness connections, amplifier compatibility, and installation before assuming the interface is defective.
- • Why do I hear suspension-related noise through my speakers?
DYNAMIX-equipped Polaris vehicles can introduce pulse-width-modulated noise when switching between suspension modes. The RFPOL-RC5 uses active filtering to suppress this noise before the signal reaches the amplifier.
- • Why isn't the RFPOL-RC5 sending audio to my amplifier?
One common compatibility issue is using the interface with an amplifier it was not designed for. Rockford Fosgate specifies compatibility with the TM1000X5ad and M5-1500X5 five-channel amplifiers, so amplifier matching should be checked first.
- • Can I keep my factory Ride Command screen after adding this interface?
Yes. The RFPOL-RC5 is designed to retain the factory Polaris Ride Command unit as the audio source instead of replacing it with an aftermarket head unit.
- • Why does my Ride Command version matter during installation?
The interface supports both 5-button and 7-button Ride Command systems, but the exact vehicle and factory configuration still need to match the intended application. Checking the connector setup before installation can prevent wiring surprises.
- • Why is the wiring confusing when the product is advertised as plug-and-play?
The interface uses pre-configured harnesses, but it still has separate connections for Ride Command audio, amplifier inputs, power, ground, and remote turn-on. Plug-and-play means the connectors are prepared for the application—it does not mean there are only one or two connections.
- • Why is there no sound from my subwoofer even though the front speakers work?
The RFPOL-RC5 separates the Ride Command audio into front, rear, and subwoofer signals and uses the factory crossovers to distribute the appropriate frequencies. A missing subwoofer connection or incorrect amplifier input can therefore leave the main speakers working while the subwoofer remains silent.
- • Can I use this interface with any Polaris audio amplifier?
No. Rockford Fosgate lists specific compatible amplifiers, including the TM1000X5ad and M5-1500X5. Connecting an unrelated amplifier may require a different interface or signal solution.
- • Will I lose the factory Ride Command crossover functions after installing the adapter?
No. One purpose of the RFPOL-RC5 is to retain Ride Command's built-in crossover functions, including the listed 100 Hz high-pass and 100 Hz low-pass filtering, while feeding the amplified system the appropriate audio signals.
- • Is the RFPOL-RC5 actually worth adding if my system already sounds clean?
Its main advantage is integration rather than simply increasing volume. It provides a cleaner connection between Ride Command and compatible Rockford amplifiers while addressing common turn-on pops and DYNAMIX-related noise; one verified buyer also specifically reported easy installation with no ignition noise.
Features:
- Seamless Ride Command Integration Interface: Engineered by Rockford Fosgate, the RFPOL-RC5 allows direct integration with factory Ride Command systems in Polaris RZR, General, and Ranger models, enabling high-performance audio upgrades without replacing the OEM headunit.
- Amplifier Expansion Capability: Designed specifically to pair with the Rockford Fosgate TM1000X5ad, this interface delivers a clean preamp signal, unlocking significantly greater output and system control for serious audio enthusiasts.
- Inline Plug-and-Play Installation: Pre-attached Molex harnesses connect directly in-line with the Ride Command output, eliminating the need for cutting or splicing while ensuring a fast and reliable installation process.
- Advanced Noise Suppression Circuitry: Built-in engineering effectively removes turn-on pop commonly associated with Ride Command systems and minimizes interference from Dynamix suspension mode changes (Firm, Sport, Comfort).
- Factory-Tuned Crossover Utilization: Leverages the Ride Command’s internal crossovers, including a 100Hz high-pass filter for main speakers and a 100Hz low-pass filter for subwoofer output, ensuring balanced frequency distribution.
- Broad Headunit Compatibility: Fully supports both 5-button and 7-button Ride Command headunits, maintaining functionality across multiple Polaris platform configurations.
- Multi-Platform Polaris Fitment: Compatible with a wide range of Ride Command-equipped vehicles including Polaris RZR, General, and Ranger UTVs, offering flexible upgrade potential across different models.
Specifications:
- Product Type: Ride Command audio interface module
- Model: Rockford Fosgate RFPOL-RC5
- Compatibility: Polaris RZR, General, and Ranger (Ride Command equipped)
- Head Unit Support: 5-button and 7-button Ride Command systems
- Connection Type: Plug-and-play Molex harness (in-line integration)
- Amplifier Compatibility: Designed for use with Rockford Fosgate TM1000X5ad (sold separately)
- Crossover Support:
- High-Pass Filter: 100 Hz (main speakers)
- Low-Pass Filter: 100 Hz (subwoofer)
- Noise Reduction: Eliminates turn-on pop and system noise interference
- Special Feature: Dynamix suspension noise suppression
- Installation Type: Inline interface module (no cutting required)
- Application: UTV audio system upgrade and amplifier integration
- Use Case: Enhancing factory Ride Command audio performance while retaining OEM system functionality
- UPC: 780687354237
- Weight: 3
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
