Kicker 51KSC69304 KS Series 6"x9" 75W RMS (150W Peak Power Handling) 4 Ohms 3-way Full Range Car Speakers
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 6"x9" 4 Ohms 3-way speakers
- • (2) Grilles
- • (2) Grille frames
- • (2) Adapter brackets
- • (2) Bottom mount spacers
- • (2) in-line crossovers
- • (2) Adhesive backed foam pads
- • (2) Grille putty
- • (4) Red plastic wire caps
- • (8) 1-1/8" Screws
- • Quick-Start guide (English/ Spanish/ German/ French)
- • Template
- • Owner's Manual
Why Choose Kicker 51KSC69304 Full Range Car Speakers?
Precision Designed for Ultimate Sound Enhancement in Any Vehicle
These speakers are designed for car audio systems and can be installed in various vehicles to enhance the audio quality. The 6x9-inch size is a common size for car speakers and fits into many car models.
Harmony Unleashed
Coaxial speakers typically consist of multiple speaker elements mounted on the same axis. In the case of 3-way speakers, you can expect separate drivers for low, mid, and high frequencies, providing a more comprehensive sound reproduction.
Powerful, Precise Sound in a Compact Design
Enjoy high-volume performance with smooth, natural vocals and instruments. Featuring a polypropylene woofer with rubber surrounds, 1" silk midrange dome, and ¾" silk-dome tweeter, these speakers deliver accurate audio across all frequencies. The thin-mount design fits behind most factory grilles, and versatile power handling (15–150W RMS) works seamlessly with factory radios or aftermarket amplifiers.
Frequently Asked Questions (FAQ)
- • Will these fit behind my factory door or rear deck panels?
Fitment depends on your vehicle's speaker size and mounting depth. Verify the available clearance before installation to avoid interference with interior panels.
- • Why do the speakers lose clarity when the volume gets high?
This usually happens when the head unit or amplifier begins clipping. Reducing the gain and properly tuning the system can restore clean sound.
- • Can I install these without adding an amplifier?
Yes. They work well with most factory and aftermarket head units, though an amplifier can deliver higher output and better dynamics.
- • Why do the speakers have almost no midbass?
Air leaks around the speaker or incorrect polarity can reduce bass response. Make sure the speakers are sealed properly and wired correctly.
- • Do I need to replace my factory speaker wiring?
Factory wiring is usually sufficient for standard installations. Heavier-gauge wiring may be beneficial if you're adding a high-power amplifier.
- • Why do I hear vibration from the doors instead of clean music?
Door panels and clips can vibrate when upgraded speakers produce more output. Adding sound-deadening material and securing loose panels can reduce unwanted noise.
- • Can these handle different types of music?
Yes. They are designed to reproduce a wide range of frequencies for genres including rock, pop, hip-hop, country, and electronic music.
- • Why does one speaker occasionally cut in and out?
An intermittent wiring connection or loose speaker terminal is the most common cause. Inspect all connectors and wiring for a secure connection.
- • Do the speakers need a break-in period?
Yes. Playing music at moderate volume for several hours allows the suspension to loosen naturally and achieve its intended performance.
- Diameter : 6x9 Inch
- Sensitivity : 92 dB
- Impedance : 4 Ohm
- Frequency Response : 30-21000 Hz
- Peak Power Handling : 300 Watts
- Design : 3 Way
- Top Mount Depth : 2.91 Inches
- Woofer Composition : Polypropylene
- Tweeter Composition : Silk Dome
- RMS Power Handling : 150 Watts
Features:
- Potent Performance: Plays at high volume while keeping vocals and instruments smooth and natural.
- High-Quality Components: Polypropylene woofer with rubber surrounds, 1" silk midrange dome, and ¾" silk-dome tweeter deliver precise audio across all frequencies.
- Thin-Mount Design: Less than 3" mounting depth with minimal tweeter protrusion fits behind most factory grilles.
- Versatile Power Use: Handles 15–150 Watts RMS for use with factory radios or aftermarket amplifiers.
- Enhanced Audio Detail: Smooth, natural reproduction for midbass, vocals, and highs.
- Included Grilles: Protect speakers and provide a clean, finished look.
Specifications:
- Speaker Design: 3-Way
- Woofer Size: 6x9" (160 x 230 mm) polypropylene cone
- Midrange Size: 1" (25 mm) silk dome
- Tweeter Size: ¾" (20 mm) silk dome
- Tweeter Dome Material: Silk
- Tweeter Magnet Material: Neodymium
- Woofer Surround Material: Rubber
- Rated Impedance: 4 ?
- Recommended Amplifier Power: 15–150 Watts RMS
- Maximum Peak Power Handling: 300 Watts
- Sensitivity: 92 dB (1W/1m)
- Frequency Response: 30–21,000 Hz
- Mounting Hole Diameter: 5-11/16" x 8-7/16" (144 x 215 mm)
- Top Mount Depth: 2-15/16" (75 mm
- Bottom Mount Depth: 3-3/16" (81 mm)
- Tweeter Protrusion: 1/8" (3 mm)
- Grilles: Included (Black steel mesh with plastic frame)
- UPC: 713034011613
- Weight: 12
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
