Wet Sounds REVO 10 FA S2 V3 REVO Series 10" 300W RMS (600W Peak Power Handling) 2 Ohms, Single Voice Coil Marine Subwoofer Free Air Black
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 10" REVO Series Single Voice Coil Free Air Marine Subwoofer
- • Owner's Manual
Why Choose Wet Sounds REVO 10 FA S2 V3 Marine Subwoofer?
Rugged Free Air Bass for Any Adventure
Optimized for Free Air (Infinite Baffle) setups, this 10" subwoofer delivers deep, low-distortion bass without a dedicated enclosure—perfect for boats, ATVs, and UTVs. Built with a durable injection-molded polypropylene cone, Santoprene rubber surround and spider, and a corrosion-resistant Nylas composite frame, it’s engineered to withstand harsh marine conditions and supports optional RGB lighting customization.
Compact Power, Deep Bass
Deliver deep, punchy low-end with 300W RMS (600W peak) power handling and 85 dB sensitivity for efficient output even with moderate amplifier power. With a shallow 4.56" top-mount depth, this subwoofer fits easily in tight spaces and is optimized for Free Air setups or a 1.3 cu ft sealed enclosure.
Stylish, High-Performance Bass
Customize your system with 8 grill options and optional RGB LED kits (sold separately) for thousands of lighting combinations. Featuring corrosion-resistant stainless steel terminals and an extended 10.8mm Xmax, this subwoofer delivers powerful, distortion-free bass that looks as good as it sounds.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with this marine subwoofer?
A 2-ohm stable amplifier delivering around 300 watts RMS is a suitable match. Proper gain settings help prevent clipping and distortion.
- • Why does the bass sound weak after installation?
Free-air subwoofers need proper separation between the front and rear air spaces. Seal the mounting area to prevent air leaks that reduce bass output.
- • Can I install this without a traditional enclosure?
It is designed specifically for free-air and infinite-baffle installations. The mounting area must still properly separate the front and rear air spaces.
- • Why does the bass distort at high volume?
Amplifier clipping or excessive gain can distort at higher volumes. Lower the gain and check the amplifier power and wiring.
- • Will it fit my existing 10-inch speaker opening?
It requires a 9.45-inch cutout and 4.62 inches of mounting depth. Measure the opening and available clearance before installation.
- • Why does the subwoofer rattle during heavy bass?
Loose mounting screws or panel vibration can cause unwanted rattling. Tighten the hardware and check the surrounding mounting surface.
- • Why isn't the subwoofer producing any sound?
Loose wiring, incorrect amplifier settings, or a missing signal can prevent output. Check the speaker connections, amplifier power, and source signal.
- • Why does the bass change when I move around the boat?
Free-air bass can vary depending on mounting location and nearby surfaces. Proper placement and air separation help provide more consistent bass.
- • Why does the cone move excessively at high volume?
Excessive excursion can result from too much power or incorrect gain settings. Reduce the gain and avoid sending distorted signals to the subwoofer.
- • Can it handle moisture and marine conditions?
It is designed for marine and open-air applications with corrosion-resistant components. Proper installation and care remain important for long-term durability.
- Diameter : 10 Inch
- Sensitivity : 85 dB
- Impedance : 2 Ohm
- Frequency Response : 20-200 Hz
- RMS Power Range : 300 Watts
- Peak Power Handling : 600 Watts
- Color : Black
- Mounting Depth : 4.62 Inches
- Free Air : Yes
Features:
- Free Air optimized: Ideal for Infinite Baffle (Free Air) applications where a dedicated enclosure isn’t practical, perfect for boats, ATVs, and UTVs.
- Durable woofer design: 10" injection-molded polypropylene composite cone with Santoprene rubber surround and Santoprene spider ensures long-lasting, low-distortion bass.
- Marine-ready frame: Nylas composite frame resists corrosion and extreme environmental conditions, designed to accept optional RGB wiring.
- Powerful output: Handles 300W RMS and 600W peak power for deep, punchy low-end performance.
- High sensitivity: 85 dB sensitivity ensures efficient sound output even with moderate amplifier power.
- Flexible installation: Top-mount depth of 4.56" allows installation in tight spaces; optimized for Free Air or 1.3 cu ft sealed enclosure.
- Customizable aesthetics: Compatible with 8 grill designs and optional RGB LED kits (sold separately) for thousands of lighting combinations.
- Reliable connections: Stainless steel terminals resist corrosion and provide secure wiring.
- Extended excursion: 10.8 mm Xmax allows higher output without distortion.
Specifications:
- Subwoofer size: 10"
- Impedance: Single 2 ohms
- RMS Power: 300 watts
- Peak Power: 600 watts
- Woofer composition: Injection-molded polypropylene composite cone
- Woofer surround: Santoprene rubber
- Woofer spider: Santoprene rubber
- Frame: Nylas composite
- Frequency response: 20–200 Hz
- Sensitivity: 85 d
- Top-mount depth: 4.56"
- Cutout diameter: 9.33"
- Diameter with grill: 11.02"
- Xmax: 10.8 mm
- Resonance frequency (Fs): 45 Hz
- Application type: Free Air / Infinite Baffle
- Optional accessories: RGB LED kit (sold separately), 8 grill designs
- UPC: 810042171770
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
