SSV Works BR-2B65A 6.5" Rear Speaker Pods with SSV Works WP-A6 6.5" 60W RMS (120W Peak Power Handling) 4 Ohms Coaxial Speakers for 2021-2025 2-Door Ford Bronco
We are a SSV Works authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) Enclosures loaded with SSV speakers (7" input harness attached)
- • (2) Wire covers
- • (2) Mounting brackets
- • (2) 7" wiring harnesses
- • (2) M6x16mm Machine screws (T-30 Torx head)
- • (2) 1/2" Philips-head screws
- • (2) Flat-washers
- • Installation instructions
- • Owner's Manual
Upgrade Your Bronco’s Sound with SSV Works
Ditch the weak factory speaker and experience the difference with the SSV Works Rear Speaker-Pod upgrade. Designed specifically for 2-door 2021+ Ford Broncos, these sleek speaker pods mount seamlessly to your factory roll cage, delivering rich, powerful sound with 6.5" weatherproof speakers. With up to 120 watts of peak power and a custom Ford-specific wiring harness, installation is a breeze. Whether you're hitting the trails or cruising the highway, your Bronco deserves audio that keeps up with your adventure. Elevate your sound—because your ride should be as bold as you are!
Frequently Asked Questions (FAQ)
- • Why does the 230-BR-2B65A sound different after installing it in a new location?
The surrounding structure can change the speaker's acoustic response. Mounting position, enclosure space, and speaker direction can all affect the amount of bass and clarity you hear.
- • What should I check if the speaker has a loose or rattling grille?
Play music at moderate volume and gently inspect the grille and mounting points. A loose grille, screw, or surrounding panel can create a vibration that sounds like a damaged speaker.
- • Why does the speaker suddenly become quieter after changing audio settings?
An EQ, fader, balance, or crossover adjustment can reduce the frequencies being sent to the speaker. Return the source settings to a neutral configuration and make changes one at a time.
- • Can incorrect amplifier gain damage the 230-BR-2B65A?
Excessive gain can cause clipping, which may create significant distortion and potentially stress the speaker. Set the gain according to the source signal and speaker system rather than using gain as a simple volume control.
- • Why does the speaker produce noise when the vehicle is idling?
If the noise changes with engine RPM, investigate the audio system's grounding and signal routing. Poorly positioned signal cables or an inadequate ground can introduce alternator or electrical noise.
- • What happens if the speaker is mounted near a heat source?
Excessive heat can shorten the life of speaker materials and nearby wiring. Choose a mounting location with reasonable temperature exposure and keep cables away from hot engine or exhaust components.
- • Why does the speaker cut out only during hard acceleration?
Hard acceleration can cause movement of wiring, connectors, or electrical supply. Inspect the speaker cable and amplifier power connections for looseness, while also checking whether vehicle voltage changes significantly under load.
- • Can I connect the speaker using longer speaker wires?
Longer cable runs are possible when appropriately sized speaker wire is used. Avoid unnecessarily thin wiring, particularly when the amplifier is delivering substantial power over a longer distance.
- • Why does the speaker sound distorted only on bass-heavy tracks?
Bass-heavy content requires more speaker excursion and amplifier output. If distortion occurs only with those tracks, reduce excessive bass boost, adjust the crossover, and check whether the amplifier is clipping.
- • How do I test whether a poor connection is causing the audio problem?
With the system powered down, inspect each terminal and connector for looseness or visible damage. A channel-swap test using the same source can also help determine whether the problem follows the speaker or stays with the wiring/channel.
Features:
- Vehicle Compatibility:
- Includes two speaker pod enclosures with 6½" SSV 2-way speakers.
- Designed to mount to the rear factory roll-cage, replacing factory speakers.
- Uses factory mounting points—no vehicle modifications required.
- Compatible with select 2021+ 2-Door Ford Broncos.
- Not compatible with 4-Door models or Raptor Broncos.
- Speakers:
- Preloaded with SSV 6½" 2-way speakers.
- Rated at 60W RMS (120W peak).
- Constructed with weatherproof materials for outdoor use.
- Enclosure:
- Made from injection-molded ASA plastic for durability in extreme temperatures.
- Includes pre-attached, powder-coated metal mounting plates for additional support while maintaining factory mounting points.
- Attached Speaker Wire:
- Each enclosure includes an 8" attached speaker wire.
- Features a proprietary 2-pin connector for direct plug-in to the factory Ford Bronco speaker wiring harness.
Specifications:
- Factory Mounting: Yes
- Plug-&-Play: Yes
- UV Resistant: Yes
- Speaker: 6.5 inch, 120w | 4ohm
- UPC: 815172019411
- Weight: 8.75
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
