Orion HCCA102NDC HCCA Pro Series 10" 550W RMS (2200W Peak Power Handling) 2 Ohm, Dust Cap Midrange Car Speaker (Single)
We are a Orion authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
High-Performance 2-Ohm Midrange Speaker
Experience clean, punchy sound with this 2-ohm midrange speaker designed for serious car audio enthusiasts. Its neodymium magnet provides exceptional power and efficiency while keeping the speaker lightweight and compact. The dust cap design enhances midrange smoothness and protects internal components for long-lasting reliability. Perfect for high-performance setups demanding clarity, power, and durability in every note.
Precision-Engineered Construction for Superior Sound
Built for audiophiles who demand performance and reliability, this speaker features a cast aluminum basket that ensures strength, stability, and reduced distortion even at high volumes. The non-pressed paper cone delivers a natural, dynamic midrange tone with exceptional durability for long-term use. Nickel push terminals provide secure, efficient connections, maximizing power transfer for consistent, high-quality sound. Designed to perform flawlessly in any high-output car audio system.
High-Power Midrange Performance for True Audiophiles
Experience bold, dynamic sound with 550W RMS / 2200W Peak power handling, ensuring clean, distortion-free performance even at extreme volumes. The treated cloth surround provides the perfect balance of flexibility and strength, enhancing sound accuracy and durability. With a wide frequency response of 105Hz–12kHz, this speaker delivers crisp vocals, detailed midrange tones, and rich musical clarity—perfect for any high-performance car audio setup.
Frequently Asked Questions (FAQ)
- • Why does my HCCA102NDC demand so much amplifier power?
Owners using the HCCA 10-inch platform have reported feeding these subs substantial clean RMS power, with one verified buyer running 1,800 watts to a single 10-inch HCCA and reporting strong results.
- • Could the amplifier be the reason my HCCA102NDC is not performing as expected?
Yes, the amplifier can strongly affect results. One HCCA owner specifically said they were only minimally impressed with a pair of subs but believed the amplifiers were responsible for the disappointing performance.
- • Why does my HCCA102NDC sound much louder after changing the enclosure?
The enclosure has a major influence on bass output. Users have reported excellent results from both sealed and ported configurations, including a 1-cubic-foot sealed box used with a single HCCA 10-inch subwoofer.
- • Is excessive cone movement normal when the HCCA102NDC is playing heavy bass?
The HCCA series is known for substantial excursion, and owners have specifically commented on the unusually large amount of cone movement during high-output playback.
- • Why does my HCCA102NDC seem to overpower the rest of my audio system?
The HCCA platform is designed for very high-output bass, and owners have reported that even a single 10-inch model can produce output comparable to multiple conventional subwoofers.
- • What should I check if my HCCA102NDC does not hit as hard as another system?
Check the amplifier's actual clean RMS output, impedance configuration, enclosure volume, port tuning, electrical supply, gain, and crossover settings before assuming the subwoofer itself is the problem.
- • Can incorrect voice-coil wiring affect the HCCA102NDC's performance?
Yes. The HCCA 10-inch dual-voice-coil design requires the coils to be wired correctly for the intended final impedance, and incorrect wiring can change the amplifier load and overall system performance. The HCCA102 is listed as a dual-2-ohm design.
- • Why does my HCCA102NDC need a strong electrical system?
A high-power subwoofer and amplifier combination can place considerable demand on the vehicle's electrical system, so battery capacity, alternator output, power wiring, and grounding should be considered when building a high-output setup.
- • Why does my HCCA102NDC sound different in a sealed box compared with a ported box?
Different enclosure alignments change the subwoofer's low-frequency response and output characteristics. User reports show the HCCA 10-inch being used successfully in sealed and ported installations, so the enclosure choice can significantly influence the final sound.
- • What should I do if my HCCA102NDC installation causes excessive vehicle rattling?
High-output HCCA systems can generate enough bass energy to make vehicle panels and interior components vibrate, so rattling should be addressed with proper panel treatment, secure mounting, and vibration damping rather than simply reducing the subwoofer's performance.
- Diameter : 10 Inch
- Sensitivity : 101.3 dB
- Impedance : 2 Ohm
- Frequency Response : 105-12000 Hz
- Peak Power Handling : 2200 Watts
- RMS Power Handling : 550 Watts
Features:
- 2-Ohm Midrange Speaker: Delivers clean, punchy sound for high-performance audio systems.
- Neodymium Magnet: Lightweight yet powerful for massive output without extra bulk.
- Dust Cap Design: Ensures smooth mids and protects internal components under heavy use.
- Cast Aluminum Basket: Provides strength and reduces distortion for clear, stable sound.
- Non-Pressed Paper Cone: Delivers natural, dynamic sound with lasting durability.
- Nickel Push Terminals: Secure, efficient connections for maximum power flow.
- High Power Handling: 550W RMS / 2200W Peak for bold, dynamic sound at any volume.
- Treated Cloth Surround: Adds flexibility and strength for balanced, high-quality audio.
- Wide Frequency Response: (105Hz–12kHz) Delivers crisp vocals and detailed midrange performance.
Specifications:
- Speaker Size: 10”
- Voice Coil Configuration: 2 Ohm
- Power Handling (Peak): 2200 Watts
- Power Handling (RMS): 550 Watts
- Sensitivity: 101.3 dB
- Frequency Response: 105 Hz – 12 kHz
- Voice Coil Diameter: 3” (Inches)
- Speaker Quantity: 1 Speaker
- Basket Material: Cast Aluminum
- Cone Material: Non-Pressed Paper
- Dust Cap Material: Non-Pressed Paper
- Magnet Type: Neodymium
- Grilles Included: No
- Mounting Depth: 99mm / 3.9”
- Overall Depth: 111mm / 4.37”
- Cutout Diameter: 234mm / 9.21”
- Overall Diameter: 260mm / 10.24”
- UPC:
- Weight: 10
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
