PRV Audio D290Py-B Series 1" 180W RMS (360W Peak Power Handling) 8 Ohm, Exit Bolt-On Polyimide Compression Driver
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 1" D2 Series Exit Bolt-On Polyimide Compression Driver
- • Owner's Manual
Clean Power That Keeps Your Highs in Control
The PRV Audio D290Py-B is built for car audio systems that need strong, clear highs without breaking a sweat. With 109 dB sensitivity, it delivers detailed and powerful vocal projection that stays sharp even in loud SPL environments. The bolt-on 1 inch exit design gives you secure mounting and easy compatibility with a wide range of professional horn systems, making upgrades or replacements straightforward and stress free.
Smooth Sound That Stays Solid Under Pressure
This compression driver uses a polyimide diaphragm that keeps your sound natural, balanced, and easy to listen to even when pushed hard. It reduces distortion while maintaining clarity across a wide 650 Hz to 19,000 Hz range, giving you crisp highs and focused midrange detail. The 1.75 inch CCAW voice coil is designed for high temperature stability, helping the driver stay efficient and consistent during long, high output sessions.
Built for Real Systems That Demand Reliability
Whether you are building a car audio setup, upgrading a pro sound system, or tuning a home high performance speaker system, this driver fits right in. It supports up to 180 watts RMS program power, giving you steady output for both daily use and competitive setups. It also works smoothly with standard bolt patterns and adapter systems, making installation into existing cabinets simple. With DSP optimized tuning, you get clean, controlled sound that stays accurate no matter how hard you push it.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio D290Py-B stop playing after a few minutes?
This can happen if the amplifier is overheating, the crossover is not configured correctly, or the diaphragm is being overloaded by frequencies that are too low.
- • Can I use the PRV Audio D290Py-B without a passive crossover?
It is not recommended. A properly selected crossover protects the compression driver from damaging low frequencies and helps maintain clear, detailed sound.
- • Why does my PRV Audio D290Py-B sound quieter than my other compression drivers?
Uneven output may be caused by amplifier channel settings, polarity issues, crossover differences, or a damaged diaphragm. Comparing each component can help isolate the problem.
- • Is the PRV Audio D290Py-B compatible with most screw on horns?
Yes. It is designed to work with compatible threaded horns that match its mounting specifications. Always verify compatibility before installation.
- • Why do vocals sound sharp through my PRV Audio D290Py-B?
Sharp vocals are often caused by an aggressive equalizer setting or a crossover frequency that is too low. Proper tuning can create a smoother listening experience.
- • Can I install the PRV Audio D290Py-B in a motorcycle or powersports audio system?
Yes. Many users install compression drivers in powersports applications, provided they are mounted securely and protected from direct exposure to water and debris.
- • Why is there a buzzing noise coming from my PRV Audio D290Py-B?
Buzzing may be caused by a loose diaphragm, mounting hardware, damaged wiring, or a distorted amplifier signal. Inspect each part of the installation to identify the source.
- • How do I know if the diaphragm in my PRV Audio D290Py-B needs replacement?
A blown diaphragm often results in little to no sound, severe distortion, or reduced high frequency output. Testing the driver with known working components can help confirm the issue.
- • Can I pair the PRV Audio D290Py-B with a DSP system?
Yes. A digital signal processor provides greater control over crossover points, equalization, and time alignment, helping the compression driver perform at its best.
- • What is the best way to protect the PRV Audio D290Py-B during everyday use?
Use the proper crossover settings, supply clean amplifier power, avoid excessive equalization, and periodically inspect the horn, wiring, and mounting hardware to ensure consistent performance and long service life.
- Diameter : 1 Inch
- RMS Power Range : 180 Watts
- Peak Power Handling : 360 Watts
Features:
- High Temperature Voice Coil Design: Uses a 1.75 inch CCAW voice coil for stable thermal handling and efficient performance.
- High Power Handling Capability: Supports up to 180 watts RMS program power for consistent high output operation.
- Versatile Application Use: Suitable for car audio builds, pro audio systems, line arrays, and high performance home speakers.
- Easy Upgrade Compatibility: Standard bolt patterns and adapter support simplify replacement in existing PA cabinets.
- Optimized Vocal Reinforcement: Designed for clear and focused midrange projection in competitive and professional setups.
- High Sensitivity Performance: Delivers 109 dB efficiency for strong and detailed vocal projection in high SPL environments.
- Polyimide Diaphragm Design: Provides natural sound reproduction with excellent durability and reduced distortion at high output levels.
- Wide Frequency Response Range: Covers 650 Hz to 19,000 Hz for accurate midrange and high frequency clarity.
- Bolt-On 1 Inch Exit Configuration: Ensures secure mounting compatibility with a wide range of professional horn systems.
- DSP Optimized Operation: Performs best with recommended crossover settings for controlled and distortion free sound output.
Specifications:
- Exit Throat Diameter: 1” (25.4mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 90 Watts
- Continuous Program Power (RMS): 180 Watts
- Peak Power: 360 Watts
- Sensitivity: 2.83V at 1m 109 dB
- Recommended Hi Pass CrossoverFor Full Power Handling 1000 Hz 12db Per Octave Crossover
- Frequency Response at: -10dB 650 – 19,000 Hz
- Voice Coil Diameter: 1.75”(44.4 mm)
- Voice Coil Wire: CCAW
- Voice Coil Former Material Kapton
- Diaphragm Material: Polyimide
- Flux Density: 1.88 T
- Magnet Material Ferrite
- UPC: 810075524949
- Weight: 2
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
