PRV Audio 6MB550FT Forte Series 6" 550W RMS (1100W Peak Power Handling) 8 Ohm, Midrange Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Serious Power Handling With Real Control
This speaker is made for high output systems that demand reliability. With support for up to 550 watts RMS program power, it handles extreme listening levels without breaking a sweat. A 94.5 dB sensitivity rating keeps output efficient, while the large 2 inch voice coil improves heat management and maintains stable performance during long, loud sessions.
Heavy Hit Midbass That Moves Real Air
Designed for high excursion performance with up to 14 mm peak to peak cone travel, it delivers deep, punchy midbass that stays clean even when pushed. With a wide response from 85 Hz to 7,500 Hz, it gives you strong low end impact while smoothly transitioning into detailed midrange.
Built Tough for Long Term High Output Use
From the rigid cast aluminum frame to the large ferrite motor assembly, everything is designed for strength and accuracy. The vented pole piece and backplate cooling system help reduce heat buildup and power compression when things get loud. A natural paper cone paired with a double roll surround keeps movement controlled and smooth, making this speaker a solid choice for high output car audio systems, stage monitors, and custom builds that need serious midbass performance.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 6MB550FT bottom out during heavy bass?
The 6MB550FT is built for powerful midbass, not sub bass. Playing frequencies below the recommended crossover point can cause excessive cone movement. Setting the correct high pass filter helps prevent this issue.
- • Can the 6MB550FT replace a subwoofer in my system?
No. While it delivers impressive midbass punch, it is not designed to reproduce the deepest bass frequencies. Pairing it with a dedicated subwoofer provides a complete listening experience.
- • Why does my amplifier clip before the 6MB550FT reaches full output?
This usually means the amplifier is underpowered or the gain is set incorrectly. Using an amplifier with adequate clean power and proper tuning allows the speaker to perform at its best.
- • Is the 6MB550FT worth upgrading from the 6MB200 series?
Many users upgrade for its higher power handling, greater excursion, and stronger midbass impact, especially in high output audio systems.
- • Why does my door panel flex after installing the 6MB550FT?
The speaker can generate significant midbass energy, which may cause factory door panels to vibrate. Reinforcing the doors with sound deadening material improves both sound quality and stability.
- • Can I use the 6MB550FT in a sealed speaker enclosure?
Yes. Many custom builders install it in properly designed enclosures or reinforced door panels depending on the goals of the audio system.
- • Why do my vocals seem less noticeable after adding the 6MB550FT?
The speaker is optimized for midbass frequencies. If the crossover settings are not properly adjusted, the stronger midbass can overshadow the midrange speakers.
- • Does the 6MB550FT need a break in period?
Many users notice the suspension becomes more compliant after several hours of normal listening, resulting in smoother and more controlled midbass performance.
- • Can I run four 6MB550FT speakers on one amplifier?
Yes, provided the final impedance matches the amplifier's rated load and the amplifier can supply enough clean power for all connected speakers.
- • Why is the 6MB550FT popular in high performance car audio builds?
Its combination of high power handling, long excursion capability, and strong midbass output makes it a favorite among enthusiasts looking for hard hitting, accurate midbass without sacrificing efficiency.
- Diameter : 6 Inch
- Sensitivity : 94.5 dB
- Impedance : 8 Ohm
- Frequency Response : 85-7500 Hz
- Peak Power Handling : 1100 Watts
- RMS Power Handling : 550 Watts
Features:
- High Excursion Midbass Performance: Engineered with extended cone travel up to 14 mm peak to peak, delivering deep and punchy midbass output with minimal distortion.
- Heavy Duty Power Handling Design: Supports up to 550 watts RMS program power, ensuring reliable performance even under extreme listening conditions.
- Large 2 Inch Voice Coil Structure: Enhances heat dissipation and motor strength, maintaining consistent output during high power operation.
- Wide Frequency Response Range: Covers 85 Hz to 7,500 Hz, offering strong low midbass impact and smooth transition into midrange frequencies.
- High Efficiency Output Level: 94.5 dB sensitivity provides loud and dynamic sound with efficient power usage.
- Advanced Cooling System: Vented pole piece and backplate design reduce power compression and improve thermal management.
- Rigid Cast Aluminum Frame: Durable die cast basket minimizes vibration and enhances structural stability for long term performance.
- Optimized Cone and Suspension Design: Natural paper cone with double roll surround ensures smooth response and controlled cone movement.
- High Strength Motor Assembly: Large ferrite magnet delivers improved control, accuracy, and overall speaker efficiency.
- Versatile System Integration: Ideal for high output car audio systems, stage monitors, and custom builds requiring powerful midbass response.
Specifications:
- Nominal Diameter: 6″ (152 mm)
- Nominal Impedance: 8 Ohm (also available in 4 Ohm)
- Nominal Power Handling: 275 Watts
- Continuous Program Power (RMS): 550 Watts
- Max Peak Power: 1,100 Watts
- Sensitivity (2.83V at 1m): 94.5 dB
- Recommended High-Pass Crossover: 95 Hz, 12 dB per octave
- Frequency Response: 85 – 7,500 Hz
- Voice Coil Diameter: 2″ (51 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 14.8 mm
- Former Material: Kapton
- Magnetic Gap Depth: 8.0 mm
- Frame Material: Die-Cast Aluminum
- UPC: 810075521887
- Weight: 3
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
