PRV Audio 12MR1000 PRO Series 12" 1000W RMS (2000W Peak Power Handling) at 8-Ohms, Midrange Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" PRO Series Midrange Car Speaker
- • Installation Accessories
- • Owner's Manual
Pure Midrange Power That Cuts Through the Mix
The PRV Audio 12MR1000 PRO is built for serious car audio enthusiasts who want loud, clean, and accurate midrange performance that stands out. With 1000 watts program RMS handling, this speaker brings strong output that stays controlled even when pushed hard. Its ultra high 99 dB sensitivity means you get massive sound with less amplifier effort, giving your system more efficiency and more headroom for dynamic playback that feels alive and detailed.
Clear Vocals and Full Range Precision You Can Hear
Covering a wide 70 Hz to 6500 Hz range, this midrange driver delivers sharp vocal clarity and precise instrument separation that makes every track sound more real. Whether you are running a 3 way system or a high SPL build, it blends smoothly with your other drivers while keeping everything defined and punchy. The paper and glass fiber cone with cloth surround adds a natural tone with controlled movement, so your sound stays smooth even at higher volumes.
Built Tough for Heat, Pressure, and Long Term Abuse
This speaker is made for real world performance, not just specs on paper. The 3 inch inside outside wound CCAW voice coil on a fiberglass former helps handle heat and maintain stability during long sessions. With advanced under spider and rear venting, cooling is improved so performance stays consistent under pressure. Designed for sealed, vented, or horn loaded enclosures, the 12MR1000 PRO fits into a wide range of builds, making it a reliable choice for pro audio, live sound, and high SPL car systems that demand control and durability.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 12MR1000 PRO sound harsh at high volume?
Harsh sound is usually caused by amplifier clipping, excessive equalizer settings, or crossover points that are not properly configured. Fine tuning the system can greatly improve vocal quality.
- • Can I use the PRV Audio 12MR1000 PRO without compression drivers?
Yes, but the speaker is designed for midrange performance. Adding compression drivers or super tweeters provides better high-frequency extension and a more balanced system.
- • Why do my vocals fade when my subwoofers are playing loudly?
This often happens when the subwoofer level is too high or the crossover frequencies overlap. Proper crossover adjustment helps vocals remain clear and prominent.
- • Is the PRV Audio 12MR1000 PRO suitable for competition audio systems?
Yes. Many SPL and demo vehicle builders use it because it delivers powerful midrange output and excellent vocal projection.
- • Why does my speaker produce a rattling sound during certain songs?
The rattling usually comes from loose door panels, speaker pods, or mounting hardware rather than the speaker itself. Inspecting the installation often solves the problem.
- • Can I install multiple PRV Audio 12MR1000 PRO speakers on one amplifier?
Yes, as long as the total impedance is compatible with the amplifier and enough clean RMS power is available for all connected speakers.
- • Why does my amplifier overheat while driving the 12MR1000 PRO?
Overheating can result from low impedance wiring, poor ventilation, incorrect gain settings, or prolonged high-volume listening.
- • Does the PRV Audio 12MR1000 PRO need a DSP for the best sound?
A DSP is optional, but many users use one to fine tune crossover points, equalization, and time alignment for improved clarity and system balance.
- • Why does one PRV Audio 12MR1000 PRO sound louder than the other?
Uneven output is commonly caused by reversed polarity, unequal amplifier gain settings, damaged wiring, or balance adjustments.
- • How can I maximize the performance of my PRV Audio 12MR1000 PRO?
Use a properly matched amplifier, apply the recommended crossover settings, avoid amplifier clipping, and securely mount the speaker to achieve loud, clean, and accurate midrange performance.
- Diameter : 12 Inch
- Sensitivity : 99 dB
- Impedance : 8 Ohm
- Frequency Response : 70-6500 Hz
- Peak Power Handling : 2000 Watts
- RMS Power Handling : 1000 Watts
Features:
- High Output Midrange Performance: Delivers powerful and accurate midrange reproduction with 1000 watts program RMS handling, designed for demanding professional and car audio systems.
- Ultra High Sensitivity Design: Achieves 99 dB sensitivity for strong output with minimal amplifier power, ensuring efficient and dynamic sound reproduction.
- Wide Frequency Response Range: Covers 70 Hz to 6500 Hz, providing detailed vocal clarity and precise instrument definition in 3 way system configurations.
- 3 Inch High Strength Voice Coil System: Features inside outside wound CCAW voice coil on a fiberglass former for improved thermal stability and long term durability.
- Advanced Cooling Ventilation Structure: Incorporates under spider and rear venting to maintain low operating temperatures during extended high power use.
- Premium Cone and Surround Construction: Uses a paper and glass fiber cone with cloth surround for smooth response, natural tone, and controlled excursion.
- Optimized for Small Enclosures: Designed for sealed, vented, and horn loaded boxes, making it highly versatile for compact and high SPL installations.
- Low Distortion High Clarity Output: Engineered for clean vocal reproduction with excellent damping and minimal distortion at high volume levels.
- Professional PRO Series Design: Built for sound reinforcement, live sound, and high SPL car audio systems requiring precision and reliability.
Specifications:
- Nominal Diameter: 12″ (305 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 500 Watts
- Continuous Program Power (RMS): 1000 Watts
- Max Peak Power: 2000 Watts
- Sensitivity 2.83V at 1m: 99 dB
- Frequency Response: 70 – 6,500 Hz
- Voice Coil Diameter: 3″ (75 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 11.0 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 10 mm
- Frame Material: Die cast Aluminum
- Overall Diameter: 12.40” (315 mm)
- Front Mount Baffle Cutout: 11.16” (283.5 mm)
- Mounting Depth: 5.12” (130 mm)
- Overall Depth: 5.61” (142.5 mm)
- UPC: 810075524598
- Weight: 16.3
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
