PRV Audio 15W1800 ALTO Series 15" 1800W RMS (3600W Peak Power Handling) at 8-Ohms, Midbass Car Speaker (Sold as Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 15" ALTO Series Midbass Car Speaker
- • Installation Accessories
- • Owner's Manual
Ground Shaking Midrange With Sub Level Attitude
The PRV Audio 15W1800 is built to bring serious low frequency energy that hits deep like a sub while still keeping your midrange clean and defined. With powerful output reaching 900 watts RMS and up to 1800 watts program power, this driver is made for systems that don’t play small. Every beat feels heavier, every drop feels tighter, and your whole setup gets that aggressive punch that car audio lovers chase.
Built Tough To Handle Real World Abuse
When the volume stays high, this speaker keeps its cool. The advanced forced air cooling system with side ventilation helps control heat so you can push it longer without stress. Inside, a massive 4 inch copper voice coil with a glass fiber former gives you the strength and thermal stability needed for demanding setups. Add in 9.5 mm Xmax with a reinforced spider and woven surround, and you get smooth, controlled movement even when things get loud and wild.
Clean Power, Natural Tone, Flexible Builds
This driver does not just hit hard, it sounds right. The non pressed pulp cone delivers a natural and warm tone that feels more like real music instead of harsh noise. With 96.5 dB sensitivity, it produces strong output without needing excessive amplifier power. The rigid die cast aluminum frame keeps everything stable, while its flexibility in sealed or ported enclosures makes it easy to integrate into almost any custom car audio system you want to build.
Frequently Asked Questions (FAQ)
- • Can the PRV Audio 15W1800 handle daily heavy bass without wearing out quickly?
Yes. The PRV Audio 15W1800 is built with a high power handling design and durable components that make it suitable for demanding daily use when installed correctly and powered within its rated specifications. Proper enclosure design and amplifier tuning are essential for long-term reliability.
- • Why does my PRV Audio 15W1800 not produce enough low bass?
This is usually related to the enclosure, crossover settings, or tuning rather than the speaker itself. Using the recommended box size and tuning frequency helps the woofer deliver stronger and deeper bass performance.
- • What size amplifier works best with the PRV Audio 15W1800?
Choose a quality amplifier that closely matches the speaker's RMS power rating. A clean, properly tuned amplifier provides better performance and is safer than using an underpowered amp driven into clipping.
- • Does the PRV Audio 15W1800 need a break in period?
Many users notice smoother performance after several hours of normal playback. While it can be used immediately, allowing the suspension to loosen naturally over time may improve overall response.
- • Can I use the PRV Audio 15W1800 in a sealed box?
It can work in a sealed enclosure, but many users prefer a properly designed ported enclosure to maximize output and efficiency. The best choice depends on your sound preferences and available space.
- • Why does my PRV Audio 15W1800 get hot during long listening sessions?
Heat buildup is normal during extended high power operation. Excessive heat can result from clipping, poor ventilation, or overpowering the speaker. Proper amplifier settings and airflow help maintain safe operating temperatures.
- • Is the PRV Audio 15W1800 good for SPL competitions?
The 15W1800 is designed for high output applications and is commonly chosen by enthusiasts looking for strong bass performance. Results will depend on enclosure design, amplifier power, electrical system upgrades, and system tuning.
- • My bass sounds distorted even though the speaker is new. What could be wrong?
Distortion is often caused by incorrect gain settings, clipping, enclosure leaks, or improper crossover adjustments. Checking the entire audio system usually resolves the issue before assuming the speaker is defective.
- • Can I run multiple PRV Audio 15W1800 woofers on one amplifier?
Yes. Many users install two or more woofers together, provided the amplifier can safely handle the final impedance load. Always wire the speakers according to the amplifier's supported impedance.
- • How can I make the PRV Audio 15W1800 last longer?
Use a properly sized enclosure, set amplifier gains correctly, avoid clipping, install a suitable high pass filter when needed, and ensure good electrical support. Regularly checking wiring and mounting hardware also helps maintain reliable performance over time.
- Diameter : 15 Inch
- Sensitivity : 96.5 dB
- Impedance : 8 Ohm
- Frequency Response : 48-2500 Hz
- Peak Power Handling : 3600 Watts
- RMS Power Handling : 1800 Watts
Features:
- Extreme Output Low Frequency Performance: Delivers deep and aggressive bass response with subwoofer level impact while maintaining strong midbass definition for high energy systems.
- Heavy Duty Power Handling Design: Supports 900 watts RMS and up to 1800 watts program power, built for serious car audio setups requiring sustained high output.
- Advanced Forced Air Cooling System: Utilizes a side ventilation airflow design to efficiently manage heat and maintain stable performance during long play sessions.
- High Excursion Precision Control: Features an impressive 9.5 mm Xmax combined with a durable spider and woven surround for controlled and accurate cone movement.
- Large 4 Inch Voice Coil Assembly: Built with a robust copper voice coil and glass fiber former to enhance thermal capacity and long term durability.
- Natural Sounding Pulp Cone: Incorporates a non pressed pulp cone that delivers a warm and balanced tonal character typical of premium pro audio systems.
- Efficient Acoustic Sensitivity: Produces 96.5 dB sensitivity, enabling strong output levels with efficient amplifier utilization.
- Rigid Die Cast Frame Structure: Engineered with a solid aluminum frame to reduce vibration and provide stable support under extreme operating conditions.
- Flexible Enclosure Integration: Performs effectively in both sealed and ported enclosures, making it suitable for a wide range of custom car audio applications.
Specifications:
- Nominal Diameter: 15″ (381 mm)
- Nominal impedance: 8 Ohm
- Nominal Power Handling: 900 Watts
- Continuous Program Power (RMS): 1800 Watts
- Max Peak Power: 3600 Watts
- Sensitivity 2.83V at 1m: 96.5 dB
- Frequency Response: 48 – 2,500 Hz
- Voice Coil Diameter: 4″ (100 mm)
- Voice Coil Wire: Copper
- Voice Coil Winding Depth: 25.0 mm
- Former Material: Glass Fiber
- Magnetic Gap Depth: 12.0 mm
- Frame Material: Die Cast Aluminum
- Overall Diameter: 15.47″ (393 mm)
- Front Mount Baffle Cutout: 13.98″ (355 mm)
- Mounting Depth: 7.11″ (180.5 mm)
- Overall Depth: 7.68″ (195 mm)
- UPC: 810075526165
- Weight: 26.45
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
