PRV Audio 8MB500-4 MB Series 8" 500W RMS (1000W Peak Power Handling) 4 Ohm, Mid Range Car Speaker (Single)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
Feel the Punch in Every Beat
If you are after that hard hitting midbass that you can actually feel, the PRV Audio 8MB500-4 delivers exactly that. It is built to produce deep and controlled low frequency impact while keeping vocals clean and defined, so your music never sounds muddy. Whether you are cruising or pushing your system to the limit, this speaker brings energy and clarity that makes every track more exciting.
Built to Play Loud Without Giving Up
This speaker is made for serious output, handling up to 500 Watts RMS with confidence. The 4 Ohm design makes it easy to pair with powerful amplifiers, giving you strong and efficient performance in real world car audio setups. From daily driving to demo level systems, it keeps up without losing control or sound quality even at high volume.
Engineered for Real World Installs
The 8MB500-4 is not just about power, it is also designed to fit and perform in practical setups like door panels and compact enclosures. Its natural paper cone and triple roll cloth surround keep the sound smooth and controlled, while the compact high efficiency motor gives you strong performance without taking up unnecessary space. It is the kind of speaker that makes upgrading your system feel like a true step up.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio 8MB500-4 sound muddy instead of punchy?
Muddy sound is often caused by improper crossover settings, poor door sealing, or excessive equalizer adjustments. Fine tuning the system can restore the speaker's midbass impact and clarity.
- • Can I pair the PRV Audio 8MB500-4 with a 4 channel amplifier?
Yes. Many users successfully run the 8MB500-4 on a quality 4 channel amplifier as long as each channel provides clean power that matches the speaker's RMS requirements.
- • Why is my 8MB500-4 losing output after playing for a long time?
Reduced output may result from amplifier thermal protection, voltage drops, or excessive heat during extended high-volume sessions. Checking your electrical system and amplifier ventilation can help.
- • Does the PRV Audio 8MB500-4 need a subwoofer to sound complete?
Yes. The 8MB500-4 is designed to handle midbass frequencies, while a dedicated subwoofer is needed to reproduce deep bass for a full-range listening experience.
- • Why do I hear popping noises from my PRV Audio 8MB500-4?
Popping sounds are commonly caused by amplifier clipping, loose wiring, or sending frequencies that are too low for the speaker. Inspecting the installation and adjusting the crossover usually resolves the issue.
- • Can I install the PRV Audio 8MB500-4 in an open baffle setup?
Yes, many users install it in vehicle doors or speaker pods. Performance depends on proper mounting, adequate support, and minimizing air leaks around the speaker.
- • Why does my speaker produce different sound levels from left to right?
Uneven output may be caused by reversed polarity, unequal amplifier gain settings, or balance and fade adjustments. Verifying the wiring and audio settings can correct the problem.
- • Is the PRV Audio 8MB500-4 a good choice for loud outdoor audio systems?
Yes. It is commonly used in high-output car audio and powersports systems where strong midbass and high efficiency are important.
- • What causes the PRV Audio 8MB500-4 to rattle at certain frequencies?
The speaker itself may not be the source of the noise. Loose mounting hardware, vibrating panels, or nearby accessories often create rattles that become noticeable at specific frequencies.
- • How can I extend the lifespan of my PRV Audio 8MB500-4?
Use clean amplifier power, apply the recommended crossover settings, avoid prolonged clipping, and regularly inspect the wiring and mounting hardware to keep the speaker performing reliably.
- Diameter : 8 Inch
- Sensitivity : 95 dB
- Impedance : 8 Ohm
- Frequency Response : 75-7500 Hz
- Peak Power Handling : 1000 Watts
- RMS Power Handling : 500 Watts
Features:
- Deep and Controlled Midbass Response: Engineered to deliver powerful low frequency impact with clear and defined vocal reproduction for dynamic car audio systems.
- High Power Handling Capability: Supports up to 500 Watts RMS program power, ensuring stable and reliable performance at high volume levels.
- Optimized 4 Ohm Configuration: Designed for car audio applications, allowing efficient power delivery and compatibility with a wide range of amplifiers.
- Wide Frequency Operating Range: Covers from 75 Hz to 7,500 Hz, making it ideal for integration in multi way setups with balanced sound output.
- Advanced Cone and Suspension Design: Features a naturally damped paper cone with triple roll cloth surround for smooth response and controlled cone movement.
- Compact High Efficiency Motor Structure: Utilizes a powerful yet space saving motor design that increases magnetic strength without excessive bulk for easier installation.
Specifications:
- Nominal Diameter: 8″ (203 mm)
- Nominal Impedance: 4 Ohm
- Nominal Power Handling: 250 Watts
- Continuous Program Power (RMS): 500 Watts
- Max Peak Power: 1000 Watts
- Sensitivity (2.83V/1m): 95 dB
- Recommended Hi Pass Crossover: 95 Hz, 12 dB per Octave
- Frequency Response (-10 dB): 75 – 7,500 Hz
- Voice Coil Diameter: 2″ (50 mm)
- Voice Coil Wire: CCAW
- Voice Coil Winding Depth: 12.0 mm
- Former Material: Kapton
- Magnetic Gap Depth: 6.0 mm
- Frame Material: Stamped Steel
- UPC: 810075526998
- Weight: 3
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
