PRV Audio TW350Ti-4 Series 2.76" 120W RMS (240W Peak Power Handling) 4 Ohm, Titanium Bullet Super Car Tweeters (Pair)
We are a PRV Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • (2) 2.76" TW Series Titanium Bullet Super Car Tweeters
- • Owner's Manual
Compact Size With Big-Time High-End Punch
The PRV Audio TW350Ti-4 is built for car audio setups that need strong, clear highs without taking up a lot of space. Its compact 3 inch by 3 inch bullet design makes it easy to install in tight spots while still delivering powerful high-frequency output. Whether you’re upgrading a daily driver or building a clean custom setup, this tweeter fits in easily and performs way beyond its size.
Crisp Titanium Detail That Brings Music to Life
With a precision titanium diaphragm, this tweeter delivers sharp, accurate highs that let you hear every detail in your music. From vocals to cymbals, everything sounds cleaner and more defined. Thanks to its 105 dB sensitivity, it gets loud with very little power, making it perfect for efficient systems that still want strong, dynamic treble. The wide 4,500 Hz to 20,000 Hz range keeps your highs extended and smooth without sounding harsh.
Clean Install and Reliable Performance
The TW350Ti-4 is designed for real-world use, featuring hidden terminals that keep your installation clean and simple. A built-in capacitor helps protect the tweeter by filtering out unwanted low frequencies, so it stays safe even when pushed. With up to 120W RMS handling and controlled dispersion for better soundstage and imaging, it delivers not just volume, but a more immersive and balanced listening experience.
Frequently Asked Questions (FAQ)
- • Why does my PRV Audio TW350Ti-4 stop playing after turning the volume up?
This usually happens when the amplifier clips, the crossover is set incorrectly, or the tweeter's protection is triggered by excessive power. Check your system tuning before increasing the volume again.
- • Can I use the TW350Ti-4 with my factory car audio system?
Yes, but most factory head units do not provide enough clean power to maximize its performance. A proper crossover and external amplifier are recommended for the best results.
- • Why do my new TW350Ti-4 tweeters sound louder than my old ones?
The TW350Ti-4 has high sensitivity, allowing it to produce more output with less power. You may need to reduce the tweeter level or adjust the EQ for better balance.
- • Is the TW350Ti-4 a good option for a daily driver audio system?
Yes, many users install it in daily driven vehicles because it delivers crisp, detailed highs while maintaining reliable performance when tuned correctly.
- • Why do I hear popping sounds from my tweeters during certain songs?
Popping can occur if low frequencies are reaching the tweeter, the amplifier is clipping, or there is a loose wiring connection. Verify the crossover settings and inspect all wiring.
- • Can the TW350Ti-4 be mounted in custom kick panels or door pods?
Yes, as long as there is enough mounting space and the tweeter is aimed properly to achieve balanced high frequency coverage.
- • Why does one TW350Ti-4 sound quieter after installation?
A quieter tweeter is often caused by reversed polarity, a faulty crossover component, damaged wiring, or an amplifier channel issue. Testing each component individually can help locate the problem.
- • Should I use a capacitor or an electronic crossover with the TW350Ti-4?
Many installers prefer a dedicated electronic crossover or DSP for greater tuning flexibility, although a properly sized passive crossover can also provide reliable protection.
- • Can I combine the TW350Ti-4 with multiple midrange speakers in one system?
Yes, it is commonly paired with multiple midrange drivers in high output systems. Proper crossover tuning and level matching are important for maintaining balanced sound.
- • What maintenance does the TW350Ti-4 require after installation?
Very little maintenance is needed. Periodically check the mounting hardware, inspect the wiring for damage, and keep dust or debris away from the horn opening to ensure consistent performance.
- Diameter : 2.76 Inch
- RMS Power Range : 120 Watts
- Peak Power Handling : 240 Watts
Features:
- Compact High-Output Bullet Design: Engineered with a space-efficient 3” x 3” profile, allowing easy installation in tight locations while delivering powerful high-frequency performance.
- Precision Titanium Diaphragm Response: Utilizes a lightweight yet rigid titanium diaphragm to produce accurate, detailed, and smooth high-frequency reproduction.
- High-Efficiency SPL Performance: Achieves 105 dB sensitivity, ensuring strong and dynamic treble output with minimal power input for efficient system pairing.
- Professional Power Handling Capability: Supports up to 120W RMS and 240W peak power, providing reliable performance for high-output and SPL-focused car audio systems.
- Wideband Frequency Extension: Covers a frequency range of 4,500 Hz to 20,000 Hz, delivering crisp highs and enhanced clarity across the upper spectrum.
- Integrated Crossover Protection System: Built-in capacitor attenuates unwanted low frequencies, ensuring cleaner signal delivery and protecting the tweeter under load.
- Easy Installation with Hidden Terminals: Features concealed connections and a square faceplate design for clean mounting and compatibility with standard cutouts.
- Controlled Dispersion for Better Imaging: Designed with a precise dispersion pattern to create a wider soundstage and improved stereo imaging for a more immersive listening experience.
Specifications:
- Nominal Impedance: 4 Ohm
- Nominal Power Handling: 60 W
- Continuous Program Power (RMS): 120 W
- Max Peak Power: 240 W
- Sensitivity (2.00V @ 1m): 105 dB
- Recommended High-Pass Crossover: 5,000 Hz (12 dB per octave) for full power handling
- Frequency Response (-10 dB): 4,500 – 20,000 Hz
- Voice Coil Diameter: 1.0” (25 mm)
- Voice Coil Wire: CCAW
- Voice Coil Former Material: Kapton
- Diaphragm Material: Titanium
- Flux Density: 1.30 T
- Magnet Material: Ferrite
- Overall Depth: 2.28” (58 mm)
- Mounting Depth: 1.93” (49 mm)
- Overall Width: 3.03” (77 mm)
- Overall Height: 3.03” (77 mm)
- Cutout Diameter: 2.76” (70 mm)
- Carton Dimensions (W × L × H): 7.00” × 3.75” × 3.00” (178 × 95 × 76 mm)
- UPC: 810075523553
- Weight: 3
- Authorized Internet Dealer
Warranty: 1 Year Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 Year from the original date of purchase with proper return authorization.
