Orion XMT65.2 - XTR Series 6.5" 1400W Peak Power Handling at 2-Ohms, Coaxial Car Speaker with Built-In Neodymium Bullet Tweeter
We are a Orion authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6.5" Midrange Car Speaker with Built-In Neodymium Bullet Tweeter
- • Owner's Manual
All-Weather Audio, Crisp Highs
Enjoy clear, powerful sound anywhere with a water-resistant coaxial midrange speaker, perfect for cars, boats, motorcycles, ATVs, and UTVs. The built-in neodymium bullet tweeter delivers crisp, detailed highs for a full, immersive audio experience. Designed for outdoor and powersports use, it provides reliable performance in any environment.
Powerful, Reliable Performance
Experience 350W RMS and 1400W peak power handling for strong, clear midrange output perfect for pro audio setups. The 2-ohm impedance maximizes amplifier efficiency for optimal performance. With a 1.5” high-temperature voice coil, this speaker delivers consistent, reliable sound even during extended high-volume use.
Compact Design, Full-Range Sound
The XMT65.2 features a slim 2.76” mounting depth, making it perfect for tight spaces without compromising performance. Its wide 75 Hz–20 kHz frequency range ensures clear, dynamic sound across lows, mids, and highs. With 92.3 dB sensitivity, it delivers accurate, high-impact audio for an immersive listening experience.
Frequently Asked Questions (FAQ)
- • What should I do if the speakers I receive are different from the XMT65.2 I ordered?
A buyer reported receiving speakers that were completely different from the ordered product. Check the model number on the speaker and packaging before installation, and contact the seller promptly if the item does not match your order.
- • Why does the XMT65.2 seem louder than my factory speakers?
The XMT65.2 has a 92.3 dB sensitivity and is designed for high-output applications, so it can produce substantially more acoustic output from the same amplifier power than many conventional factory speakers.
- • Why does my amplifier run differently after installing these speakers?
The XMT65.2 has a 2-ohm impedance, which presents a different load than many factory 4-ohm speakers. Confirm that your amplifier is stable at 2 ohms before connecting the pair.
- • Why are the highs more noticeable than with my original speakers?
The XMT65.2 incorporates a built-in neodymium bullet tweeter, so replacing a conventional factory speaker can produce a more prominent high-frequency presentation.
- • Why does the speaker not fit my factory 6.5-inch opening exactly?
Although marketed as a 6.5-inch speaker, the XMT65.2 has an approximately 7.2-inch overall diameter and 2.76-inch mounting depth. Measure the available opening, mounting surface, and clearance rather than relying only on the nominal speaker size.
- • Can I install the XMT65.2 in a shallow door or powersports enclosure?
Its 2.76-inch mounting depth makes it relatively suitable for tighter installations, but the surrounding basket, magnet, grille, and mounting hardware still need sufficient clearance.
- • Why does the speaker sound distorted when I push the volume very high?
The 350W RMS rating does not eliminate the possibility of distortion from amplifier clipping, excessive gain, poor source signal, or incorrect crossover settings. Set the amplifier correctly and avoid sending the speaker a clipped signal.
- • Can water-resistant XMT65.2 speakers be exposed directly to heavy rain or submerged?
They are specified as water-resistant and intended for vehicles, boats, motorcycles, ATVs, and UTVs, but water-resistant should not be interpreted as fully waterproof or suitable for submersion.
- • Why do I still need a subwoofer after installing the XMT65.2?
The XMT65.2 is a coaxial midrange speaker with a published frequency range of 75 Hz–20 kHz. A dedicated subwoofer can handle the deeper bass below the speaker's practical operating range.
- • Are these speakers difficult to install?
Available buyer feedback describes the XMT65.2 as easy to install, while the physical fit still depends on the vehicle and mounting location. Check the dimensions and amplifier impedance requirements before starting the installation.
- Diameter : 6.5 Inch
- Sensitivity : 92.3 dB
- Impedance : 2 Ohm
- Frequency Response : 75-20000 Hz
- Peak Power Handling : 1400 Watts
- RMS Power Handling : 350 Watts
Features:
- Water-Resistant Coaxial Midrange: Engineered with a moisture-resistant cone and components, ideal for cars, boats, jet skis, motorcycles, ATVs, UTVs, and outdoor powersports systems.
- Built-In Neodymium Bullet Tweeter: Delivers crisp, detailed highs and excellent sound projection without requiring separate tweeters.
- High Power Handling: Provides 350W RMS and 1400W Max Power for strong, clear midrange output suitable for pro audio builds.
- 2-Ohm Impedance & 1.5” High-Temperature Voice Coil: Ensures maximum amplifier efficiency and powerful, reliable audio reproduction.
- Slim Mounting Depth: With a mounting depth of just 2.76”, the XMT65.2 fits easily into tight locations while still delivering wide frequency coverage.
- Wide Frequency Range & High Sensitivity: Covers 75 Hz – 20 kHz with 92.3 dB sensitivity, producing accurate, dynamic sound across lows, mids, and highs.
Specifications:
- Speaker Type: 6.5” Coaxial Midrange
- Power Handling: 350W RMS / 1400W Max
- Impedance: 2 Ohms
- Voice Coil: 1.5” High-Temperature
- Tweeter: Built-in Neodymium Bullet Tweeter
- Frequency Response: 75 Hz – 20 kHz
- Sensitivity: 92.3 dB
- Features: Water-Resistant Cone and Components
- Mounting Depth: 70mm / 2.76 (Inches)
- Overall Depth: 90mm / 3.54 (Inches)
- Mounting Diameter: 70mm / 2.76 (Inches)
- Overall Diameter: 183mm / 7.2 (Inches)
- UPC: 818550010024
- Weight: 6
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
