45KM654 KM65 6.5-Inch 65W RMS (195W Peak Power) Marine Coaxial Speakers w/ 3/4-Inch Tweeters, 4-Ohm, Charcoal and White Grilles
Features:
- Four-Ohm Voice Coil
- 3/4-Inch Titanium Tweeter
- UV-Treated Polypropylene Woofer With Santoprene® Surround
- UV-Resistant Polymer Basket
- Locking/Sealed Terminal Cover
- Sealed Motor Structure
- 316L Stainless Mounting Hardware Included
- Charcoal and White Grilles Included
- Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure
Specifications:
- Peak Power Handling: 195 Watts
- Continuous Power Handling: 65 Watts RMS
- Impedance (Ω): 4
- Frequency Response (Hz): 35-21k
- Sensitivity (1W,1m): 90
- Woofer (in, mm): 6-1/2, 165
- Tweeter (in, mm): 3/4, 20
- Tweeter Dome Material: Titanium
- Mounting Hole Diameter (in, mm): 5-1/8, 130
- Mounting Depth (in, mm): 2-7/8, 72
- LED Lighting: No
- Grilles: Charcoal and White
45KMTC65 6.5" 65W RMS (195W Peak Power) Tower Speaker System
- Woofer (in, cm): 6-1/2, 16
- Tweeter (in, cm): 3/4, 2
- Tweeter Dome Material: Titanium
- Rated Impedance (ohms): 4
- Peak Power Handling (Watts): 195
- Continuous Power Handling (Watts RMS): 65
- Sensitivity (1W, 1m): 90
- Frequency Response (Hz): 35-21k
- Height incl. bracket (in, cm): 10-11/16, 27.1
- Height from roll bar (in, cm): 8-1/4, 22.8
- Diameter (in, cm): 7, 17.7
- Depth (in, cm): 9-11/16, 24.5
- LED Lighting: Yes
GR10BT Marine USB/MP3/WMA Receiver with Built-in Bluetooth
Tuner
Frequency bands: FM/AM/Weather Band
FM Tuner with RDS:
- Frequency Range:
- North America 87.9 ~ 107.9MHz (0.2MHz STEP)
- Europe 87.5 ~ 108.0MHz (0.05MHz STEP)
- Asia 87.5 ~ 108.0MHz (0.5MHz STEP)
- Australia 87.5 ~ 108.0MHz (0.01MHz STEP)
AM Tuner:
- Frequency Range:
- North America 530 ~ 1710kHz (10kHz STEP)
- Europe 531 ~ 1602kHz (9kHz STEP)
- Asia 531 ~ 1602kHz (9kHz STEP)
- Australia 531 ~ 1629kHz (9kHz STEP)
Weather Band:
- NOAA Frequency Range:
- 162.400MHz ~162.550MHz
- Channel 1 : 162.400MHz
- Channel 2 : 162.425MHz
- Channel 3 : 162.450MHz
- Channel 4 : 162.475MHz
- Channel 5 : 162.500MHz
- Channel 6 : 162.5250MHz
- Channel 7 : 162.550MHz
Audio
- Maximum Power Output: 45W × 4
- Low Pass Filter (Subwoofer): (80/120/160/Through)
General
- Chassis Dimensions (W × D) (mm): 103 x 96
- Low Consumption Mode as Power Off: ACC Off - zero current draw, Standby Mode (Power Off & ACC On) <= 50mA
44KXMA8005 4x100-Watt Four-Channel Full-Range Class D Amplifier
Features:
- Class D Power Plant
- One-Ohm Stable Bass Channel
- SHOCwave™ Bass Restoration Processor
- KXARC Wireless Remote Included
- Gain Control With "Optimal Input" Indicator
- Variable 24dB Subsonic Filter
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
Specifications:
- Amplifier Class: D
- Low-Pass Crossover Frequency: 10-5000 Hz
- Low-Pass Slope (dB/octave): 24 dB/octave
- High-Pass Crossover Frequency: 10-5000 Hz
- High-Pass Slope (dB/octave): 24 dB/octave
- Bass Boost: 0-18 dB
- Bass Boost Frequency: 40 Hz
- RMS Power Output (Watts x Channels) 50 x 4
- Frequency Response at Rated RMS Power 20-20k Hz
- THD at Rated RMS Power 1%
- Signal to Noise Ratio 95 dB
- Input Voltage 144v
- Peak Power Output (Watts x Channels) N/A
- Power at 2 Ohms (Watts x Channels) 100 x 4
- Bridged Power (Watts x Channels) 200 x 2
- Minimum Impedance Bridged 4
- Minimum Impedance Unbridged 2
- Fan Cooled: No
- Fuse Rating: 100
- Speaker Level Inputs: Yes
- Preamp Outputs: No
45KM104 10" 175W RMS (350W Peak Power) Weatherproof Subwoofer
Features:
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Rear Gasketing Included
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
- (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Specifications:
- Woofer(in,mm): 10, 25
- Impedance (OHMS): 4 SVC
- Peak Power Handling(Watts): 350
- Continuous Power Handling(Watts RMS): 175
- Sealed Enclosure Volume Min-Max(ft³, L): 1-2.4, 28.3-68
- Vented Enclosure Volume Min-Max(ft³, L): 1.25-1.75, 35.4-49.6
- Frequency Response(Hz): 30-500
- Mounting Depth(in, cm): 5, 12.7
- Hole Diameter(in, cm): 9-3/16, 23.2
- Outer Diameter(in, cm): 10-11/16, 27.1
MPS-RZKIT Audio Upgrade Kit for Speaker Pods with Subwoofer Box and Am
- Package includes MPS-RZSP and MPS-RZSB, complete with stainless steel mounting hardware
- Fits 2014-up Polaris RZR models
- Includes a 10" subwoofer mounting solution to replace glove box
- Includes left and right speaker enclosures for 6.5”-6.75” speaker pods
- Includes (2) two amplifier mounting brackets 2014-2017, and 2018+
- High-density polyethylene (HDPE) construction provides a corrosion-resistant and eco-friendly material ideal for harsh outdoor environments
- Protects speakers and subwoofer equipment without compromising sound quality
- Black textured coat finish matches the factory finish for a flawless look
- Sub enclosure approx. 0.9 cubic feet
- Speaker enclosure approx. 0.2 cubic feet
- UPC: 798418843554
- Weight: 35
- Authorized Internet Dealer
Warranty: 1 Year Manufacturer warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 1 year from the original date of purchase with proper return authorization.