(2) 43C104 - 10" Comp Series 500 Watts Peak Power 4-ohm Car Subwoofer - Sold as Each
One of the best value money can buy in terms of car subwoofers. Crafted by one of the most innovative audio companies, the C10 can stand the test of time wether you are a true blue audiophile or just a person who wants some good ol' bass sound.
Specifications
- Size: 10 -inch
- Dual Voice Coil: No
- Ideal Ported Box Volume (cubic feet): N/A
- RMS Power Range (Watts): 70-125
- Cutout Diameter or Length (inches): 9 3/16
- Peak Power Handling (Watts): 500
- Impedance: 4 ohms
- Cone Material: Polypropylene
- Fs (Hz): 33
- Qts: 0.585
- Bottom Mount Depth (inches): N/A
- Xmax (millimeters): 10.3
- Surround Material: Foam
- Ideal Sealed Box Volume (cubic feet): N/A
- Port diameter (inches): N/A
- Port length (inches): N/A
- Free-Air: No
- Sensitivity: 86.2 dB at 1 watt
- Frequency Response: 30 - 500 Hz
- Top Mount Depth (inches): 5
- Vas (liters): 46.94
PZ-820.2 - 800 Watts Max Power PowerZone Series 2 ohm Stable 2 Channel Class-A/B Car Amplifier
Features & Benefits
- Hi Level Inputs
High level inputs easily tie into OEM audio systems that do not offer RCA output. Molex connector is included
- Operation Mode
2 channel operation mode allows either stereo or mono bridged operation
- Crossover Type
Variable electronic crossovers allow for complete control of the sound
- Electronic Equalizer
Control of amplifier output with on-board electronic crossover to tailor specific frequencies to speakers and subwoofers.
Check specifications for specific frequencies for this amplifier
- Class / Topology
Class A/B high sound quality circuit that allows amplifier to develop high levels of power with minimal distortion
- Output Device Technology
Exclusive Crunch SPEED-FET MOSFET components maximize power efficiency while improving sound quality and minimizing distortion
- Heat Sink
QTD (Quick Thermal Dispersion) technology assures the amplifier makes huge power while running very cool with nearly undetectable musical distortions
- Power Supply
Rugged MOSFET Pulse Width Modulation power supply
Allows amplifier to product efficient power without taxing the vehicle electrical system
- Output Connections
Nickel-plated brass connectionwith hex set screw terminals allow for secure connection and resist erosion
- Connection Type
Secure connection for all power, ground and speaker connections.
- Full-Range RCA Outputs for Signal Pass Through
Daisy chain multiple amplifier to eliminate additional signal cables from the source unit
- LED System Protection Circuitry Diagnostics
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel
Specifications
- Class
Class A/B
- Variable Voltage
6V - 0.2V
- Signal to Noise
>90dB
- Frequency Response
10Hz-45KHz
- Crossover
VeraCross
Switchable
FULL / LPF / HPF
- Variable High Pass Crossover 12dB per Octave
60Hz - 1.2kHz
- Variable Low Pass Crossover 12dB per Octave
30Hz - 250Hz
- Bass Boost
0 - 9dB
- Power @ 1 Ohm
N/A
- Power @ 2 Ohms
2 x 400 Watts
- Power @ 4 Ohms
2 x 200 Watts
- Mono Bridged @ 4 Ohms
1 x 800 Watts
- Total Channels
2
- Audio Inputs
RCA
- Audio Outputs
Full Range
RCA
- Speaker Terminal Wire Gauge
Spade Connector
Recommended
- Fusing
30Ax1
- Total Harmonic Distortion (THD)
<0.05%
- UPC:
- Weight: 21
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
