Kicker 48KMA6006 KMA Series 6-Channel 100W RMS x 6 at 2 Ohm, Class-D Full-Range Marine Amplifier
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • KMA Series 6-Channel Class-D Full-Range Marine Marine Amplifier
- • (4) 3/4" Screws
- • 3mm Allen Key
- • Power Chart
- • Kicker Power Certification
- • Owner's Manual
Why Choose Kicker 48KMA6006 Marine Amplifier?
High-Quality Performance
Elevate your audio with this Class D amplifier, offering 50 watts per channel RMS (6 channels), 100 watts at 2 ohms, and 200 watts bridged. Enjoy crystal-clear sound with a 10Hz - 20kHz frequency response and precise 12 dB/octave low and high-pass crossovers for optimal tuning. Perfect for powerful, high-quality performance.
Personalize Your Audio Experience
Unlock superior performance with this amplifier's ultra-efficient Class D design, delivering an impressive 750 watts of dynamic power and the ability to control three separate zones, allowing you to personalize your audio experience like never before.
Fine-Tune the System for Perfect Sound
Enjoy ultimate amplification flexibility with this six-channel amplifier, featuring bridging capability for easy customization. Built for durability, the conformal-coated circuit board offers protection against the elements, while the variable 12dB crossover allows you to fine-tune the system for the perfect sound.
Superior Corrosion Resistance
Experience powerful bass enhancement with the KickEQ™ variable 6dB bass boost, delivering extra low-end punch. Built for the outdoors, it features Real Marine™ ABYC/NMMA-compliant power connections for reliable, marine-grade performance. Plus, the 316L stainless-steel hardware ensures superior corrosion resistance in even the harshest environments.
1997 Sea Ray Boat Upgrade
Frequently Asked Questions (FAQ)
- • Why won't the amplifier power on after installation?
A blown fuse, poor ground connection, or missing remote turn-on signal is the most common cause. Verify the battery voltage, fuse, remote wire, and all power connections before troubleshooting further.
- • Is this designed for marine use?
Yes. It is built with marine-grade materials to resist moisture, UV exposure, corrosion, and vibration in harsh boating environments.
- • Why does the amplifier keep going into protection mode?
Protection mode is usually caused by overheating, a wiring short, or speaker impedance below the recommended level. Inspect the speaker wiring and allow the amplifier to cool before restarting it.
- • Can I power multiple speakers with this amplifier?
Yes. It is designed to operate multiple compatible marine speakers as long as the total speaker load stays within the recommended impedance range.
- • Why is there power but no sound coming from the speakers?
This is often caused by loose RCA cables, incorrect source settings, or disconnected speaker wiring. Verify every signal and speaker connection before assuming the amplifier has failed.
- • Why does the amplifier become hot during long days on the water?
Heat buildup is normal during extended high-power operation. Make sure the amplifier has proper airflow and is not mounted inside a completely sealed compartment.
- • Can I bridge channels to power a marine subwoofer?
Yes, if the amplifier supports bridged operation and the connected subwoofer meets the recommended impedance requirements. Follow the wiring diagram in the owner's manual for proper configuration.
- • Why do I hear engine or alternator noise through my speakers?
Electrical interference is commonly caused by poor grounding or signal cables routed too close to power wires. Improving the ground connection and separating cable paths usually eliminates the noise.
- • Should I use marine-grade wiring during installation?
Yes. Marine-grade power and speaker wire provide better resistance to moisture, corrosion, and saltwater exposure than standard automotive wiring.
- • Can I expand my marine audio system in the future?
Yes. You can add compatible amplifiers, speakers, or marine subwoofers if your boat's charging system has enough capacity to support the additional equipment.
- Low Frequency Response : 50-200 Hz
- High Frequency Response : 50-200 Hz
- Number of Channels : 6
- Frequency Response : 10-20000 Hz
- Built In Crossovers : Yes
- RMS Power Output : 6x100 Watts
- Amplifier Class : D
- Fuse Rating : 1x80 A
Features:
- Efficient Power Design: The amplifier uses an ultra-efficient Class D design for optimized power usage.
- Power Output: It delivers a dynamic power output of 750 watts, providing ample performance.
- Control Zones: You can control three separate zones of your sound system for personalized audio.
- Amplification Flexibility: The amplifier is a six-channel unit with bridging capability, allowing for flexible setup.
- Durability: The conformal-coated circuit board ensures durability and protection against the elements.
- Crossover Control: A variable 12dB crossover lets you easily tune the system to suit your needs.
- Bass Enhancement: The KickEQ™ variable 6dB bass boost provides extra low-end punch for enhanced sound.
- Marine Compliance: It features Real Marine™ ABYC/NMMA-compliant power connections, ensuring marine-grade reliability.
- Corrosion Resistance: The 316L stainless-steel hardware offers exceptional corrosion resistance in harsh environments.
Specifications:
- RMS Power Output (Watts x Channels): 50 x 6
- Frequency Response at Rated RMS Power: 10Hz - 20kHz
- THD at Rated RMS Power: Not Available
- Signal to Noise Ratio: 95 dB
- Input Voltage: Not Available
- Peak Power Output (Watts x Channels): Not Available
- Power at 2 Ohms (Watts x Channels): 100 x 6
- Bridged Power (Watts x Channels): 200 x 3
- Minimum Impedance Bridged: 4 Ohms
- Minimum Impedance Unbridged: 2 Ohms
- Amplifier Class: D
- Low-Pass Crossover Frequency: 50Hz - 200Hz
- Low-Pass Slope (dB/octave): 12 dB/octave
- High-Pass Crossover Frequency: 50Hz - 200Hz
- High-Pass Slope (dB/octave): 12 dB/octave
- Bass Boost: 0 - 6 dB
- Bass Boost Frequency: 40 Hz
- Fan Cooled: No
- Fuse Rating: 80
- Speaker Level Inputs: Yes
- Preamp Outputs: No
- Height: 2.25 inches
- Width: 13.875 inches
- Depth: 6.625 inches
- UPC: 713034020387
- Weight: 6.8
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
just perfect! Using it to amplifier my boat’s three zones as I got another amp to power up my sub. sound quality is terrific as always when it comes to Kicker but what makes me happier with the amp is the build quality. its compact, durable, great construction, and it gives me the peace of mind that it won’t give up on me for a short time.
