Wet Sounds REVO 12 FA S4-W V2 REVO Series 12" 400W RMS (800W Peak Power Handling) 4 Ohms, Marine Subwoofer Free Air - White
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" REVO Series Marine Subwoofer
- • (6) 1-1/2" Stainless steel screws
- • Gasket
- • Template
- • Owner's Manual
Why Choose Wet Sounds REVO 12 FA S4-W V3 Marine Subwoofer?
Marine-Ready Bass, No Enclosure Needed
Optimized for Free Air setups, this 12" subwoofer delivers deep, low-distortion bass without a dedicated enclosure—perfect for boats and recreational vehicles. Built with a Nylas composite frame, Santoprene™ surround, and marine-grade rubber spider, it offers rugged, long-lasting performance in even the harshest environments.
Versatile Bass with Rugged Reliability
Deliver deep, rich low-end with 400W RMS (800W peak) power handling, perfect for any high-performance setup. Featuring stainless steel binding post terminals for secure connections and flexible installation options—including Free Air, 1.1 cu ft sealed, or 1.7 cu ft ported enclosures—this subwoofer adapts to your ride and sound system needs.
Powerful Bass, Fully Customizable
With 88 dB sensitivity, this subwoofer delivers strong, efficient bass even with moderate amplifier power. Personalize your setup with 8 grill options and optional RGB LED kits, while improved rear venting and a powder-coated aluminum frame ensure superior performance and long-lasting durability in marine environments.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with these marine speakers?
A marine amplifier delivering around 100 watts RMS per channel is a suitable match. Proper gain settings help prevent clipping and distortion.
- • Why does the sound distort when I turn up the volume?
Amplifier clipping or excessive gain can cause distortion at high volume. Lower the gain and check the source level and wiring.
- • Why aren't the speakers loud enough?
Insufficient amplifier power or incorrect gain settings can limit output. Check the amplifier rating, gain, and speaker connections.
- • Will these fit my existing speaker openings?
They require a 5-inch cutout and about 3.3 inches of mounting depth. Measure your opening and available clearance before installation.
- • Why is one speaker louder than the other?
Unequal amplifier gain, reversed polarity, or loose wiring can cause uneven volume. Check both channels and speaker connections carefully.
- • Why aren't the RGB lights working?
Incorrect wiring or a missing RGB controller can prevent the lighting from working properly. Check the four-wire harness and power connections.
- • Why does the speaker rattle during heavy bass?
Loose mounting screws or vibration from the mounting surface can cause rattling. Check the mounting hardware and surrounding panel for movement.
- • Why does the bass sound weak?
Incorrect crossover settings can reduce the speaker's mid-bass response. Adjust the amplifier crossover and check the source settings.
- • Why does the tweeter sound too harsh?
Excessive treble or aggressive gain settings can make the titanium tweeter sound harsh. Reduce the treble level and adjust the amplifier gain.
- • Why did the speaker fit poorly after cutting the opening?
An incorrect cutout or curved mounting surface can cause poor fitment. Use the 5-inch cutout template and mount the speaker on a flat surface.
- Diameter : 12 Inch
- Sensitivity : 88 dB
- Impedance : 4 Ohm
- Frequency Response : 20-400 Hz
- RMS Power Range : 400 Watts
- Peak Power Handling : 800 Watts
- Color : White
- Mounting Depth : 4.92 Inches
- Free Air : Yes
Features:
- Free Air optimized: Designed for infinite baffle (Free Air) applications where a dedicated enclosure isn’t practical, perfect for boats and recreational vehicles.
- Marine-grade durability: Nylas composite frame resists corrosion and extreme environmental conditions.
- Durable woofer design: 12" injection-molded composite cone with Santoprene™ rubber surround and marine-grade rubber spider ensures long-lasting, low-distortion bass.
- Reliable connectivity: Stainless steel binding post terminals accept bare wire, pin connectors, or banana plugs up to 10 gauge.
- Flexible installation: Optimized for Free Air; can also be mounted in a 1.1 cu ft sealed or 1.7 cu ft ported enclosure for tuned performance.
- Powerful performance: Handles 400W RMS (800W peak) for deep, rich low-end output.
- Efficient operation: 88 dB sensitivity delivers strong bass output with moderate amplifier power.
- Optional customization: Compatible with 8 different grill designs and RGB LED kits for thousands of lighting combinations.
- Updated design: Improved rear venting and powder-coated aluminum frame enhance performance and longevity in marine environments.
Specifications:
- Subwoofer size: 12"
- Impedance: Single 4Ω (optional 2Ω available)
- RMS Power: 400 watts
- Peak Power: 800 watts
- Woofer composition: Injection-molded composite cone
- Woofer surround: Santoprene rubber
- Woofer spider: Marine-grade rubber
- Frame: Powder-coated aluminum
- Frequency response: 20–400 Hz
- Sensitivity: 88 dB
- Top-mount depth: 5-5/16"
- Cutout diameter: 11-1/8"
- Frame width/length: 12.774"
- Vas: 41.5 liters
- Fs (resonance frequency): 35 Hz
- Qts: 0.8
- Xmax: 11.5 mm
- Free Air optimized; optional sealed enclosure: 1.1 cu ft or ported: 1.7 cu ft tuned to 41 Hz
- Grille: Sold separately
- UPC: 814820027679
- Weight: 15
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
