Wet Sounds REVO 12 PSE XSB REVO PSE Series 12" 500W RMS (1000W Peak Power Handling) 4 Ohms, Passive Radiator Marine Subwoofer Enclosure XS Black with Stainless Steel Grille Kit
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 12" REVO PSE Series Passive Radiator Marine Subwoofer Enclosure
- • (2) Hard-mounted clamps
- • (2) Quick-lock clamps
- • 7" Speaker harness
- • 7" RGB harness
- • (8) 40mm screws
- • Owner's Manual
Why Choose Wet Sounds REVO 12 PSE XSB Enclosed Car Subwoofer?
Quick-release Mounts
When you want great sound without the hassle of cutting holes in your interior panels, Wet Sounds' Revo 12 PSE enclosure brings the boom to your boat in a weathertight, easy-to-install package.Quick-release mounts make it easy to find the perfect position for your enclosure, and allow easy removal without tools.
Injection-molded Composite Cone
The Revo 12 PSE enclosure's punch comes courtesy of Wet Sounds' Revo 12 HP subwoofer. This tough, weatherproof sub features a non-rusting Nylas composite frame and stainless-steel terminals that resist corrosion. An injection-molded composite cone lets the Revo 12 HP handle up to 500 watts RMS, so you know you'll get plenty of volume.
Give You Options to Fit the Sub to Your Vessel's Interior Style
The rotomolded enclosure comes pre-wired with weatherproof connections for the speaker leads and optional RGB LED lighting kit (sold separately). The 12" passive radiator gives you the added bass of a ported enclosure, but in a smaller, water-tight package with absolutely no port noise.A variety of grilles give you options to fit the sub to your vessel's interior style.
Frequently Asked Questions (FAQ)
- • What amplifier should I use with this subwoofer?
A 4-ohm amplifier delivering around 500 watts RMS is a suitable match. Wet Sounds recommends amplifiers such as the HTX-1, HTX-2, SYN-DX4, or SDX-4.
- • Why does the bass sound weak after installation?
Incorrect gain, crossover settings, wiring, or placement can reduce bass output. Check the amplifier settings and make sure all connections are secure.
- • Why does the bass distort at high volume?
Excessive gain or amplifier clipping can distort at higher volume levels. Lower the gain and make sure the amplifier provides clean power.
- • Why isn't the subwoofer producing any sound?
Check the amplifier power, audio signal, fuse, and weatherproof speaker connections. Also verify that the amplifier is properly connected to the 4-ohm load.
- • Why does the enclosure rattle during heavy bass?
Loose mounting hardware or nearby panels can create unwanted vibrations. Tighten the mounts and check surrounding surfaces for loose components.
- • Can the enclosure be mounted in different positions?
Yes, the enclosure supports multiple mounting positions with quick-release hardware. Choose a secure location with enough clearance around the enclosure.
- • Why does the bass change when I move the enclosure?
Placement affects how low frequencies interact with nearby surfaces. Try another secure position if the bass response changes noticeably.
- • Why aren't the RGB lights working?
The enclosure is pre-wired for optional RGB lighting, but the RGB kit is sold separately. Check the RGB harness and connections if the lighting does not operate.
- • Will it fit in my available installation space?
The enclosure is approximately 15.5 inches in each dimension. Measure the mounting area and allow additional room for wiring and quick-release hardware.
- • Is it suitable for marine and outdoor installations?
The rotomolded enclosure and weatherproof connections are designed for marine applications. Proper mounting and regular inspection can help maintain reliable performance outdoors.
- Diameter : 12 Inch
- Sensitivity : 88 dB
- Impedance : 4 Ohm
- Frequency Response : 20-400 Hz
- Peak Power Handling : 1000 Watts
- Enclosure Type : Ported
- RMS Power Handling : 500 Watts
Features:
- Designed for the Water: Enjoy great sound without cutting holes in your interior panels with the Wet Sounds Revo 12 PSE enclosure.
- Marine-Ready Subwoofer: Equipped with the robust Wet Sounds Revo 12 HP subwoofer, delivering powerful, weatherproof audio.
- Durable Construction: Features a non-rusting Nylas composite frame and stainless-steel terminals that resist corrosion.
- High Performance: Injection-molded composite cone handles up to 500 watts RMS for maximum volume.
- Weatherproof Enclosure: Rotomolded and pre-wired with weatherproof connections for speaker leads and optional RGB LED lighting kit (sold separately).
- Enhanced Bass: 12" passive radiator provides the added bass of a ported enclosure without port noise.
- Easy Installation: Quick-release mounts for easy positioning and tool-free removal.
- Customizable Look: Various grilles available to match your vessel's interior style.
Specifications:
- Sealed rotomolded plastic enclosure
- package includes 12" sub, 12" passive radiator, and grilles (assembly required)
- injection-molded composite cone with Santoprene rubber surround
- Nylas composite frame
- quick-release mounts and harness included
- handles up to 500 watts RMS (1000 watts peak)
- sensitivity: 88 dB
- impedance: 4 ohms
- frequency response: 20-400 Hz
- dimensions: 16.5" W x 15.5" H x 16.5" D
- UPC: 814820029000
- Weight: 30
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
