Kicker 51KSS369 KS Series 6"x9" 100W RMS (200W Peak Power Handling) 4 Ohm, 3-Way Car Component Speaker System with Two Silk Dome Tweeters and Two Midranges
We are a Kicker authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • 6"x9" KS Series Woofers Car Component Speaker System
- • (2) GM/Mopar Midrange Brackets
- • (2) Chrysler/Jeep Midrange Brackets
- • (2) Toyota/Subaru Midrange Brackets
- • (2) 12" Speaker Leads with in-line low-pass crossovers, bare-to-quick-slide
- • (2) 14" Speaker Wires with band-pass crossovers, bare-to-quick-slide
- • (2) 12" High-pass Crossover wires, bare-to-quick-slide
- • (2) Flush Mount Trim Rings
- • (2) Front Angle Rings
- • (2) Back Angle Rings
- • (2) Short Mounting Nuts
- • (2) Long Mounting Nuts
- • (2) Surface Mount Pods
- • (2) Pod Nuts
- • Tweeter Removal Tool
- • (12) 1-1/8" Screws
- • (12) Red Plastic Wire Caps
- • (2) Adhesive Backed Foam Strips
- • (2) 10" Zip Ties
- • Template
- • Owner's Manual
Why Choose Kicker 51KSS369 Component System?
Powerful Performance and Stunning Clarity for an Immersive Experience
Engineered for GM, Ford, Chrysler, Jeep, Dodge, and select import models, this 3-way component speaker system delivers concert-level sound with deep bass, crisp mids, and crystal-clear highs. Featuring an optimized in-line 12dB crossover, it ensures smooth frequency transitions for rich, balanced audio at any volume. Whether you're upgrading your factory system or building a premium setup, this speaker system provides powerful performance with stunning clarity for an immersive listening experience.
Seamless Fit for Optimal Sound
The ultra-thin speaker design ensures effortless installation in tight spaces, making it perfect for vehicles with limited mounting depth. Designed for hassle-free integration, it uses factory holes and mounting points, eliminating the need for modifications while providing a secure and seamless fit for optimal sound performance.
Versatile Mounting and Enhanced Clarity
The 6x9-inch woofers with EVC technology and powerful magnets deliver deep, rich bass, while versatile tweeter mounting options—angled, surface, or flush—allow for optimal placement. Included brackets ensure a secure fit for 2.75-inch midrange speakers, enhancing overall clarity.
Frequently Asked Questions (FAQ)
- • Why do my new component speakers sound quieter than my factory system?
Factory radios often provide limited power, which can reduce the output of aftermarket speakers. Adding a properly matched amplifier can significantly improve volume and clarity.
- • Can I use the included vehicle-specific brackets without making custom adapters?
Yes. The package includes dedicated brackets for GM/Mopar, Chrysler/Jeep, and Toyota/Subaru applications to simplify installation in many factory locations.
- • Why do my tweeters have no output after installation?
Verify that the high-pass crossover wires are connected correctly and that all quick-slide terminals are fully seated. Incorrect crossover wiring is one of the most common installation issues.
- • Can I install the tweeters on the dashboard instead of the factory location?
Yes. The included flush-mount rings, angle rings, and surface-mount pods allow you to position the tweeters where they provide the best soundstage.
- • Why do the midrange drivers sound distorted at higher volume?
Distortion is usually caused by amplifier clipping or incorrect crossover connections. Confirm that each driver is connected to the proper crossover lead and that the amplifier is correctly adjusted.
- • Do I need to install all of the included crossover wires?
Yes. The low-pass, band-pass, and high-pass crossover networks are designed to send the correct frequencies to each driver for balanced performance.
- • Why do the vocals seem to come from the doors instead of the front of the vehicle?
Tweeter placement and aiming have a major effect on stereo imaging. Mounting the tweeters higher and adjusting their angle can create a more natural front soundstage.
- • What are the adhesive-backed foam strips included with the system used for?
The foam strips help seal the speakers against the mounting surface and reduce unwanted vibrations. A better seal also improves midbass response.
- • Why do my door panels rattle more after installing the component system?
The increased output can cause factory trim panels, clips, and wiring to vibrate. Securing loose components and adding sound-deadening material usually minimizes rattles.
- • Can I install this component system without cutting my factory wiring?
Many vehicles allow a plug-and-play installation with the appropriate wiring adapters. Some applications may still require minor wiring modifications depending on the factory audio system.
- Diameter : 6x9 Inch
- Sensitivity : 92 dB
- Frequency Response : 30-21000 Hz
- Peak Power Handling : 200 Watts
- Woofer Composition : Polypropylene
- Tweeter Composition : Silk Dome
- Vehicle Make : Ford
- Vehicle Make : Chrysler
- Vehicle Make : Jeep
- RMS Power Handling : 100 Watts
- Vehicle Make : Dodge
Features:
- Wide Vehicle Compatibility: Fits GM, Ford, Chrysler, Jeep, Dodge, and select import models
- Concert-Level Sound: Delivers powerful volume with stunning clarity
- Optimized Crossover Network: Includes an in-line 12dB crossover for enhanced audio performance
- Ultra-Thin Speaker Design: Ensures effortless installation in tight spaces
- Easy Installation: Uses factory holes and mounting points for a seamless fit
- High-Performance Woofers: 6x9-inch woofers with EVC and powerful magnets for deep, rich bass
- Versatile Tweeter Mounting: Includes angled, surface, and flush mounting options
- Custom Midrange Mounting: Comes with three mounting brackets for 2.75-inch midrange speakers
Specifications:
- Speaker Size: Vehicle-specific
- Driver Design: 3-way
- Woofer Design: Cone
- Woofer Material: Polypropylene
- Woofer Surround: Rubber
- Midrange Design: Cone
- Midrange Material: Composite paper
- Tweeter Design: Dome
- Tweeter Material: Silk
- Impedance: 4 Ohms
- Weather-Resistant: No
- Grilles Included: No
- Sensitivity (1W at 1m): 92 dB
- Frequency Response: 30 Hz – 21 kHz
- Maximum RMS Wattage: 100W
- Peak Power Handling: 200W
- Top-Mount Depth: 2.94 in
- Bottom-Mount Depth: 3.19 in
- Cutout Diameter: 0 in
- Mounting Height: 0.24 in
- Frame Width: 6.65 in
- Frame Length: 9.22 in
- UPC: 713034044970
- Weight: 9.45
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
