Wet Sounds ZERO 12 SUB KIT-S4 ZERO Series 12" 300W RMS (600W Peak Power Handling) 4 Ohms, Marine Subwoofer Sealed Enclosure
We are a Wet Sounds authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
• 12" ZERO Series Marine Subwoofer Sealed Enclosure
• (8) 1-1/2" Stainless steel screws
• (20 Mounting brackets
• (2) M5x55mm Stainless steel machine screws
• (2) stainless steel M5 Nuts
• (3) Stainless steel flat-washers
• (10) 1" Stainless steel screws
• 18" Internal harness terminated with a DT Series 2-way Deutsch Connector (installed)
• 14" External harness terminated with a DT Series 2-way Deutsch Connector
• Unloaded 12" Subwoofer enclosure
• M6x20mm Stainless steel machine screw
• Side insert
• Grille
• Template
• Owner's Manual
Why Choose Wet Sounds ZERO 12 SUB KIT-S4 Marine Subwoofer?
Powerful Bass, Marine-Proven Durability
Experience deep, high-output bass with a compact enclosure crafted for ZERO Series 12" Subwoofers. Marine-tested and IP65-rated, it resists dust, water, salt, and UV exposure—delivering reliable performance in even the harshest conditions.
Flexible Setup, Rugged Performance
Position your subwoofer any way you need—vertically, horizontally, or at an angle—thanks to versatile mounting options. Expand your system by connecting multiple enclosures with the included hardware, all built on a durable Nylas composite basket that ensures strength and stability in demanding marine environments.
Durable, Hassle-Free Bass
Enjoy long-lasting, high-quality sound with a Santoprene rubber surround built to withstand wet marine environments. The waterproof 2-pin Deutsch connector makes installation quick and easy, while the optimized sealed enclosure delivers deep, powerful bass in a compact design.
Frequently Asked Questions (FAQ)
- • What amplifier should I use for this subwoofer?
A 4-ohm amplifier capable of delivering around 400 watts RMS is a suitable match. Avoid using an amplifier that cannot safely handle the 4-ohm load.
- • Why does the bass sound weak after installation?
Incorrect gain, crossover settings, wiring, or placement can reduce bass output. Check the amplifier settings and make sure all connections are secure.
- • Why does the bass distort at high volume?
Amplifier clipping or excessive gain can cause distortion when the volume is raised. Lower the gain and make sure the amplifier provides clean power.
- • Why isn't the subwoofer producing any sound?
Check the amplifier power, audio signal, fuse, and waterproof Deutsch connector. Also verify that the amplifier is properly connected to the 4-ohm load.
- • Why does the enclosure rattle during heavy bass?
Loose mounting hardware or an uneven mounting surface can create unwanted vibrations. Tighten the hardware and make sure the enclosure is mounted securely.
- • Can the enclosure be mounted in different orientations?
Yes, the enclosure supports multiple mounting orientations for flexible installations. Make sure it is firmly secured using the supplied mounting hardware.
- • Why does the bass change when I move the enclosure?
Subwoofer placement can affect how low frequencies interact with nearby surfaces. Try another secure mounting position if the bass response changes noticeably.
- • Can I connect two enclosures together?
Yes, multiple enclosures can be linked using the supplied hardware. Make sure your amplifier can handle the combined impedance and power requirements.
- • Why is the enclosure difficult to mount securely?
A curved or uneven mounting surface can prevent proper alignment and create installation problems. Use a flat, stable surface and pre-drill mounting holes as recommended.
- • Can it handle moisture and outdoor conditions?
The enclosure is designed for marine and powersports use with weather-resistant construction. Proper installation and regular inspection can help protect the system from excessive water and environmental exposure.
- Diameter : 12 Inch
- Sensitivity : 85.9 dB
- Impedance : 4 Ohm
- Frequency Response : 25-2000 Hz
- RMS Power Range : 400 Watts
- Peak Power Handling : 800 Watts
- Color : Black
Features:
- Maximum Bass Performance: Designed specifically for ZERO Series 12" Subwoofers to deliver deep, powerful bass in a compact, high-output enclosure.
- Marine-Tested & Weatherproof: IP65-rated enclosure protects against dust and water; tested to ASTM B117 salt/fog and ASTM G154 UV standards for extreme marine durability.
- Versatile Mounting Options: Can be mounted vertically, horizontally, or at an angle to fit any audio setup.
- Expandable System Design: Multiple enclosures can be joined together with included hardware for bigger, room-filling bass.
- Durable Nylas Basket: Speaker frame made from a Nylon and Fiberglass composite for strength and stability under demanding marine conditions.
- Santoprene Rubber Surround: Provides long-lasting durability and optimal sound performance in wet environments.
- Easy Installation: Waterproof 2-pin Deutsch connector eliminates drilling, wiring, and sealing hassles.
- Optimized Sealed Enclosure: Compact design delivers deep bass without taking up excess space.
Specifications:
- Subwoofer Size: 12"
- Power Handling: RMS 400W / Peak 800W
- Impedance: 4Ω
- Frequency Response: 25 Hz – 2 kHz
- Sensitivity: 85.9 dB at 1W/m
- Enclosure Dimensions: 28" W x 14" H x 5.71" D (Short) / 8.81" D (Tall)
- Woofer Material: Polypropylene/Mica/Glass with Santoprene rubber surround
- Connector: 2-pin waterproof Deutsch
- Enclosure Type: Sealed
- Color: Black
- UPC: 810042178946
- Weight: 30
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for replacement within 2 Year(s) from the original date of purchase with proper return authorization.
